Come burn with Howard

Howard Burn

Howard Burn

Well-Known Member
Veggin some Greenpoint gear in soil for a little change of pace

These are the females I got, all being trained to be mainlined , most just chopped

The only male is the one closest to camera which is a Black SS from breeders boutique. I’m keeping him I like the strength of the stem, the close node growth, i took a cutting when I topped him

From the back are two hibernate
Then two jelly pie in the middle
Then front left blizzard Bush
The front right pioneer kush
Solo black SS Male in front

C7141B95-3BD0-403E-898E-7C54909DA075.jpeg
 
Last edited:
Howard Burn

Howard Burn

Well-Known Member
I’m taking down this Medijuana today

It’s over 82 days , still spitting some white pistils, trichomes are all over some amber and most 50/50 cloudy clear.

I’ve lost patience and it’s nice and plump, and my Greenpoint gear is knockin at the door to get in.

I put the two night riders in flower along with the sour kush (x) deep blues from breeders boutique

Fat fat fat buds and didn’t stretch at all.... no stretch at all plant , still around 13 to 15 inches

Here’s the Medi

039444A1-A30E-4F6F-AF8A-1A1CE21628F3.jpeg 0DA7671F-DD6A-46D7-88F9-D3894A782AB5.jpeg D82E1B17-1790-448B-97B6-0F34550F56BF.jpeg 50BBA111-05E4-4CD8-B2F9-5DD962A48802.jpeg D744F435-CE2F-43FC-BE82-BBE824470FB8.jpeg
 

Attachments

Howard Burn

Howard Burn

Well-Known Member
I have seeds from a cross with a male REM with the female medi shown there

I’ll get around to popping them one day...
 
Howard Burn

Howard Burn

Well-Known Member
Jillybean same orange pheno from above coming down tonight , topped multiple times , from clone

Mainline always the better way to go, much more larf on this than the above one. Still a great yield no complaints at all

9 weeks in the 3x3 under 300w cobs

2 gallon hempy bucket

4EC770FA-EFA3-40B7-8B9A-DC3A40A50595.jpeg 8B397885-7240-4384-8A8C-2E7FBD6EEC2A.jpeg B17972A8-AA57-49EE-ADF0-778ABEA62E43.jpeg
 
Last edited:
Howard Burn

Howard Burn

Well-Known Member
Howard Burn said:
Veggin some Greenpoint gear in soil for a little change of pace

These are the females I got, all being trained to be mainlined , most just chopped

The only male is the one closest to camera which is a Black SS from breeders boutique. I’m keeping him I like the strength of the stem, the close node growth, i took a cutting when I topped him

From the back are two hibernate
Then two jelly pie in the middle
Then front left blizzard Bush
The front right pioneer kush
Solo black SS Male in front

View attachment 4110343
Click to expand...
Greenpoint gear being mainlined and vegged

BB393878-D5C5-485D-B5D4-7019B6F8FF7A.jpeg
 
Howard Burn

Howard Burn

Well-Known Member
ThatSpudGuy said:
Looking good bro. Im starting a hempy grow now soon . Any tips? Do you use full perlite or mix?
Click to expand...
Always wash the perlite, and wet when you’re working with it, the dust is nasty and not good to breathe in , so wet it first.

Run water through the perlite/mix in your hempy until the water is coming out clear. Not rinsing the perlite completely can leave a residue in the bottom of your bucket

Once roots hit the Rez let the bucket get almost empty between watering, encourages root growth and replaces the oxygen in the root zone , after a while you’ll be able to tilt or pick up a bucket and know by its weight of it needs to be watered.

For my seedlings and clones I use 100% perlite, and a 75/25 perlite/vermiculite ratio in the bigger 2 gallons.

...that’s off the top the first things I’m thinking of I’ll be sure to add anything else I remember, great info on the world of hempy thread also
 
ThatSpudGuy

ThatSpudGuy

Well-Known Member
Howard Burn said:
Always wash the perlite, and wet when you’re working with it, the dust is nasty and not good to breathe in , so wet it first.

Run water through the perlite/mix in your hempy until the water is coming out clear. Not rinsing the perlite completely can leave a residue in the bottom of your bucket

Once roots hit the Rez let the bucket get almost empty between watering, encourages root growth and replaces the oxygen in the root zone , after a while you’ll be able to tilt or pick up a bucket and know by its weight of it needs to be watered.

For my seedlings and clones I use 100% perlite, and a 75/25 perlite/vermiculite ratio in the bigger 2 gallons.

...that’s off the top the first things I’m thinking of I’ll be sure to add anything else I remember, great info on the world of hempy thread also
Click to expand...
So when you say to rinse the mix is that when i first make up a mix or inbetween waterings?

When planting seedlings do you plant the seed straight into the perlite?

What sort of yields are you getting off the 2gallons?

Great info mate thanks
 
Howard Burn

Howard Burn

Well-Known Member
Before you plant your seedling or transplant a plant, I rinse the perlite.

I usually pre fill the bucket I will be using with my new perlite/verm mix , then run water through the bucket until water is clear, drain as much as possible, then begin transplant. You will see the Water runoff first be a dusty white perlite mix until you start to see clear

I germinate seed in glass of water 24 to 48 hours, root pops out then I start seeds straight in perlite or rapid rooters. Rapid rooters stay under dome until the seed sprouts or it will dry out, solo cup hempy doesn’t need a dome , then I put the rooter into the hempy of choice

Yield for a 2 gallon hempy in my setup can be anywhere from 20 grams up to 3 ounces depending on strain veg time etc , in my setup. Can extremely vary from different lights wattage genetics etc
 
ThatSpudGuy

ThatSpudGuy

Well-Known Member
Howard Burn said:
Before you plant your seedling or transplant a plant, I rinse the perlite.

I usually pre fill the bucket I will be using with my new perlite/verm mix , then run water through the bucket until water is clear, drain as much as possible, then begin transplant. You will see the Water runoff first be a dusty white perlite mix until you start to see clear

I germinate seed in glass of water 24 to 48 hours, root pops out then I start seeds straight in perlite or rapid rooters. Rapid rooters stay under dome until the seed sprouts or it will dry out, solo cup hempy doesn’t need a dome , then I put the rooter into the hempy of choice

Yield for a 2 gallon hempy in my setup can be anywhere from 20 grams up to 3 ounces depending on strain veg time etc , in my setup. Can extremely vary from different lights wattage genetics etc
Click to expand...
Great. How many times do you water a week in the 2gallons? Thats alot of good info mate cheers for that. Im looking forward to starting hempy
 
You must log in or register to reply here.
Top