Cannibis Dispensary In Colorado?

MrFishy

Well-Known Member
So how many what watt lights are hangin' how far above about how much bud in that picture, Herb?
Thanks.
 
Last edited:

AdReNaLiNeRuSh

Well-Known Member
Herbologist,

That pic is very nice, but within the enormous realm of the internet, it is merely a dime a dozen. If you really want to impress people, snap a picture of your fully-qualified and functional laboratory. That, my friend, is quite exceptional.

:peace:
-AR
 

herbologist

New Member
I have been remodeling over the last 6 months with some really neat ideas.I would have to say the best thing we have is our Glycerin tincture.The new High Times has a weak version,we have been doing this with food grade glycerin for beverages for years .now its out of the bag,lets get everyone on the same page:
1.Five gallons glycerin,
2.two and a half pounds good trim and lower bud material,(grind in food processor to flour)
4.Put all in huge kettle and warm for 14 days on warm,sift through a bubble bag and cool.
5.Take one quarter dropper for full size adult,for five hours of relief.



Moderator, feel free to add to recipes-Herbologist :hump:
 

herbologist

New Member
So how many what watt lights are hangin' how far above about how much bud in that picture, Herb?
Thanks.
12 plants per bed.4x8 Beds,three 600 watt digital,Advanced nutrients cannaseur line entirely.would show more but we don't even High Times it.:hump:
Our new run has only 9 plants per bed ,same lighting and we our pulling 5 pounds finished trimmed buds per tray in12 weeks of flowering.three weeks of vegative.
 
Last edited:

MrFishy

Well-Known Member
12 plants per bed.4x8 Beds,three 600 watt digital,Advanced nutrients cannaseur line entirely.would show more but we don't even High Times it.:hump:
Our new run has only 9 plants per bed ,same lighting and we our pulling 5 pounds finished trimmed buds per tray in12 weeks of flowering.three weeks of vegative.
Thanks for the data . . . how far above the growth for this set-up, please?
Are you dropping to 9 for better light coverage, or are the harvests larger than 12 in the same space, due to slight crowding?
:blsmoke:
 

jimthomas

Active Member
Herb,

Thanks for the growing tips. Please let us know when you open your store in Denver. What type of irrigation system do you use and do you reuse the potting mix?

Anyone have an opinion as to how one 1000 watter on a six foot light track would work with a 8x4 tray. Wouldn't 8 plants be better than 9 in this configuration.
 

ganjagoddess

Well-Known Member
Or you could fit 50 plants flower straight from rooted clone, with the same light mover.

then you would achieve roughly .5 - 1 ounce per plant and all with no veg.
 

herbologist

New Member
I don't reuse the sunshine 4 mix as to bacteria.as far as one 1000 watts with a light mover would produce airy buds.Hey!If that is what you have now,make it work.Pull off your harvest and then upgrade,so many want to go big before they know how to grow,


My mix;Two large bags of per light on bottom of tray,
:two blocks of sunshine four fluffed out.
:two large bags Earth worm castings,mixed good with Sunshine mix.
:Two tablespoons of lime per gallon of mix.mixed well.
One large bag light Warrior,mixed well.:hump:
 
Last edited:

jimthomas

Active Member
Herb,
Sounds like a good recipe. I'm also going to add a big bag of Fox Farm Happy Frog for the mycorrhizae and humic acids. I could supplement the 1000 watters with a couple of 400 w ceramic metal halides on both ends when flowering. That would get me up to the 1800 watts your using. Also these new CMH's put out a lot of UV and have a better light spectrum than MH or HPS but as far as I know are not yet available in 600 or 1000 watts. I'm only allowed 9 mature plants but I could sign up a couple more patients if successful. Can you accept surplus crop from caretakers or do you have any patients in the Denver area that I could sign up?

Also, how tall do your plants get?

As far as reusing the soil, I was thinking that flushing with a hydrogen peroxide solution would get rid of most of the bacteria and viruses? Do you ever flush your trays?
 
Last edited:

OnSolomonsGrave

Well-Known Member
Herb,
Sounds like a good recipe. I'm also going to add a big bag of Fox Farm Happy Frog for the mycorrhizae and humic acids. I could supplement the 1000 watters with a couple of 400 w ceramic metal halides on both ends when flowering. That would get me up to the 1800 watts your using. Also these new CMH's put out a lot of UV and have a better light spectrum than MH or HPS but as far as I know are not yet available in 600 or 1000 watts. I'm only allowed 9 mature plants but I could sign up a couple more patients if successful. Can you accept surplus crop from caretakers or do you have any patients in the Denver area that I could sign up?

Also, how tall do your plants get?

As far as reusing the soil, I was thinking that flushing with a hydrogen peroxide solution would get rid of most of the bacteria and viruses? Do you ever flush your trays?
Who would makes lights over 400 imho :peace::mrgreen:
 

ganjagoddess

Well-Known Member
Herb,
Sounds like a good recipe. I'm also going to add a big bag of Fox Farm Happy Frog for the mycorrhizae and humic acids. I could supplement the 1000 watters with a couple of 400 w ceramic metal halides on both ends when flowering. That would get me up to the 1800 watts your using. Also these new CMH's put out a lot of UV and have a better light spectrum than MH or HPS but as far as I know are not yet available in 600 or 1000 watts. I'm only allowed 9 mature plants but I could sign up a couple more patients if successful. Can you accept surplus crop from caretakers or do you have any patients in the Denver area that I could sign up?

Also, how tall do your plants get?

As far as reusing the soil, I was thinking that flushing with a hydrogen peroxide solution would get rid of most of the bacteria and viruses? Do you ever flush your trays?
The extra 400's are a WASTE, they would need to be closer to the plant canopy than the 1000's and in general it would be a fruststaring setup.

Just Go with the 1000 watts on light rails.

Also Herbie isnt going to help you with client refferals as you are a caregiver.

Also he will not buy excess from you.

Dont get me wrong, Im not trying to put words in his mouth, but he will probally just say call him, and then over the phone tell you no.
 

herbologist

New Member
First off I would put the 1000 in the middle and 400 on each side.the 1000 watt will cover about a 6x6 area and the 400 will add the extra light needed.

:I buy daily from our members and growers that support our community with quality medicine.You are always welcome

I personally keep over ninety mother strains in house daily for our growers needs or just plum Desire.I order over forty strains a year directly from my friends,world cannabis cup winners.

I will assist any and all sincere caregivers in our state that assist legally and legal patients.

Ganjagoddess please do not assume anything,as I treat everyone with respect until they prove differently in nature.

Obviously herbologist knows more than he's saying.:hump:

I veg for three weeks they get about twenty inches tall when I start flowering.I'll have to bend for the next eight weeks.
 
Last edited:

ganjagoddess

Well-Known Member
Never said anything about respect??? Figured you would just say to call you.

But overall Are you filing 1099's for the people you buy from???

Also to JIMTHOMAS you would be better off using the single 1000 on a light mover, no need to spend an additional 288kwh a month with the 400's, 1 1000 on a light mover does the trick just great, also 2 600's not on light movers accomplish the same desired effect.
 

jimthomas

Active Member
Never said anything about respect??? Figured you would just say to call you.

But overall Are you filing 1099's for the people you buy from???

Also to JIMTHOMAS you would be better off using the single 1000 on a light mover, no need to spend an additional 288kwh a month with the 400's, 1 1000 on a light mover does the trick just great, also 2 600's not on light movers accomplish the same desired effect.
Thanks for the tips. 288 kwh is only about $30 a month extra. I could also hang some fluorescents on the side walls instead of the 400's or install another 1000 watts overhead without the light track. I'm seeking to optimize lumens with my current lights not necessarily lower operating costs. I guess 3 - 600's would be ideal, but I already have the other equipment. My grow area is only about 9x6. Also wouldn't the 400's benefit the grow by adding the better light spectrum and UV of the CHM's to the red/yellow of the 1000 watt Hortilux HPS.

Just seeking to recoup some growing costs or trade extra product for some other items. Would that still require a 1099? While I want to stay legal, I'm not sure I want to be listed in the Fed's database as a grower. :confused:
 

ganjagoddess

Well-Known Member
There are co-ops out there that will pay you cash for extra crop, usually they offer you around $3000 a pound or less, but if they dont 1099 you, then you technically are doing something illegal and most likely so are THEY..

Ya lots of people dont pay there taxes, and who likes having to pay taxes, Im not trying to be a square but its the truth, in this "legal" business why not keep it that way.
 

jimthomas

Active Member
There are co-ops out there that will pay you cash for extra crop, usually they offer you around $3000 a pound or less, but if they dont 1099 you, then you technically are doing something illegal and most likely so are THEY..

Ya lots of people dont pay there taxes, and who likes having to pay taxes, Im not trying to be a square but its the truth, in this "legal" business why not keep it that way.

I guess as long as the Fed govt says pot is illegal that won't happen.
 
Top