Canna Nutes

Smithy1

Smithy1

Well-Known Member
I'm new to growing and im currently running northern lights with canna A+B 2ml per 2 litre of water , My question is I'm thinking about adding more products from canna for the end off my flowering phase but when looking at the feeding schedule per litre online do I just throw all them in to one my 2 litre bottle like the PK the Boost and the A+B all together? So I'll have the A+B in the 2 litre bottle the Canna boost in the same bottle the PK in the same bottle also like all nutes in one bottle? I just don't want to fuckk them up, Thanks for your help.
 
Sithlord88

Sithlord88

Well-Known Member
I ran canna once. Over rated imo. To use the whole line is pricey too. I just filled my bucket with water then mixed one at a time and stirred then the next and so on.
 
Lordhooha

Lordhooha

Well-Known Member
Smithy1 said:
Any idea if I can mix them up in all one bottle? I've tried searching the net but can't really find anything on any other forums.
Click to expand...
Don’t know for sure. Most time they have to be mixed separate. It’s another reason I went to one part nutrients from star to finish.
 
Lucky Luke

Lucky Luke

Well-Known Member
You cannot mix A and B into one bottle as a concentrate Its a chemistry thing. Cal/mag should be put in first when mixing and then add A and B.
Im sure someone with more knowledge will chime in.

I use Canna A and B. But I use a different brand of PK13/14 and flower enhancer.
 
Last edited:
Sithlord88

Sithlord88

Well-Known Member
With most nutes, dont mix em together without water. Like i said water first then nutes mixed in one at a time. I just start at the top of the list on the feeding schedule and work my way down. I make sure to stir/mix well between nutes. And yes, most nutes are over priced and over hyped. Im a fan of nftg, spendy tho. The sample pack is where its at
 
rob333

rob333

Well-Known Member
Smithy1 said:
I'm new to growing and im currently running northern lights with canna A+B 2ml per 2 litre of water , My question is I'm thinking about adding more products from canna for the end off my flowering phase but when looking at the feeding schedule per litre online do I just throw all them in to one my 2 litre bottle like the PK the Boost and the A+B all together? So I'll have the A+B in the 2 litre bottle the Canna boost in the same bottle the PK in the same bottle also like all nutes in one bottle? I just don't want to fuckk them up, Thanks for your help.
Click to expand...
canna is a good product prob one of the best any who says its not has not used it right u can add all the additives in to one rez or bottle so flower a & b + rhizo +ph13/14+boost+bio floras lol u will be there all day adding one by one lol
 
rob333

rob333

Well-Known Member
rob333 said:
canna is a good product prob one of the best any who says its not has not used it right u can add all the additives in to one rez or bottle so flower a & b + rhizo +ph13/14+boost+bio floras lol u will be there all day adding one by one lol
Click to expand...
people here have no idea
 
Lucky Luke

Lucky Luke

Well-Known Member
I think Silica and cal/ mag should be used separately as well??

Edit Silica should be added before the Cal/mag.

I found this whilst having quick google- from another board.

SNAP:



Start with your water, add each concentrate (Grow Big, Tiger Bloom) one at a time to the water. DO NOT MIX THE CONCENTRATED NUTES TOGETHER! I've considered it when I was first starting, but it turns out doing that can lock out some of the nutrition (that you paid for)



On a side note, if you ever get into another brand there IS a right way to do it. If you use silica and/or cal-mag, start with the silica, then the Cal-mag. I'll give you a couple examples:



Let's say I'm using something like Dyna-Gro, for a full cycle I would need





  • Grow nute (aka Foliage Pro)


  • Bloom nute


  • Silica Supplement


  • Cal-Mag Supplement


To mix my solution, I would do the following:





  2. Measure out 1 gallon of RO water


  4. Add the Silica Supplement First (if not using silica, see next step)


  6. add the Cal-mag Supplement


  8. add the grow or bloom nutrient


  10. pH the solution and feed the babies!


To remember this, I used the S.N.A.P. method; it's a good way to train yourself when mixing nutes, It goes like this:



To use this method you basically spell SNAP out in your head, each letter being a step in the process





  • S-Supplements


  • N-Nutrients


  • A-Additives


  • P-pH


So you start with Supplements, then add the nutes (grow/bloom), then the additives (Sweetners, etc), and finally, you check and adjust the pH
 
Last edited:
NrthrnMichigan

NrthrnMichigan

Well-Known Member
Lordhooha said:
Most bottled nutrients are over priced and full of hype.
Click to expand...
Fancy labels and over priced, watered down money makers for the manufacturers. I hear Snoop has his own line out now... Hmmm maybe I should quit growing and manufacture over priced nutrients..Def will have the coolest labels and the dopest bottles. Second thought...I prefer growing.
 
Lordhooha

Lordhooha

Well-Known Member
NrthrnMichigan said:
Fancy labels and over priced, watered down money makers for the manufacturers. I hear Snoop has his own line out now... Hmmm maybe I should quit growing and manufacture over priced nutrients..Def will have the coolest labels and the dopest bottles. Second thought...I prefer growing.
Click to expand...
Lol that’s their cash crop.
 
Last edited:
Smithy1

Smithy1

Well-Known Member
Sithlord88 said:
With most nutes, dont mix em together without water. Like i said water first then nutes mixed in one at a time. I just start at the top of the list on the feeding schedule and work my way down. I make sure to stir/mix well between nutes. And yes, most nutes are over priced and over hyped. Im a fan of nftg, spendy tho. The sample pack is where its at
Click to expand...
So I just say on my next feed which is in a few days I can add A+B, PK and Boost all in my 2 litre bottle and all will be okay? They are in flower as week speak and I want to start adding these additives.
 
Smithy1

Smithy1

Well-Known Member
Lucky Luke said:
I think Silica and cal/ mag should be used separately as well??

Edit Silica should be added before the Cal/mag.

I found this whilst having quick google- from another board.

SNAP:



Start with your water, add each concentrate (Grow Big, Tiger Bloom) one at a time to the water. DO NOT MIX THE CONCENTRATED NUTES TOGETHER! I've considered it when I was first starting, but it turns out doing that can lock out some of the nutrition (that you paid for)



On a side note, if you ever get into another brand there IS a right way to do it. If you use silica and/or cal-mag, start with the silica, then the Cal-mag. I'll give you a couple examples:



Let's say I'm using something like Dyna-Gro, for a full cycle I would need





  • Grow nute (aka Foliage Pro)


  • Bloom nute


  • Silica Supplement


  • Cal-Mag Supplement


To mix my solution, I would do the following:





  2. Measure out 1 gallon of RO water


  4. Add the Silica Supplement First (if not using silica, see next step)


  6. add the Cal-mag Supplement


  8. add the grow or bloom nutrient


  10. pH the solution and feed the babies!


To remember this, I used the S.N.A.P. method; it's a good way to train yourself when mixing nutes, It goes like this:



To use this method you basically spell SNAP out in your head, each letter being a step in the process





  • S-Supplements


  • N-Nutrients


  • A-Additives


  • P-pH


So you start with Supplements, then add the nutes (grow/bloom), then the additives (Sweetners, etc), and finally, you check and adjust the pH
Click to expand...
Nice little thing you have going there took my time to digest it like but I like what you have done anyway, So just for confirmation I can add add Canna A+B, PK and Boost all in my same 2 litre feeding bottle and all will be fine? I just don't want to mess anything up with it been my first grow, Maybe I'm just looking into things to much.
 
You must log in or register to reply here.
Top