Can someone please check my tent list please?

Natural

Active Member
Tent: DR120

Ballast: Lumatek 600w

Lamp: 600w MH swapping to HPS in flower.

Reflector: Cooltube with it's reflector removed and then the unit jury rigged into an adjusta shade type wing.

Extraction: Ruck RK150L 715m3 + carbon filter

Hydro: Nutriculture GT100 NFT // EF230

Solution control: Bluelab Combo Meter, Reverse Osmosis machine.

======================================


That's the body of it really; there are a few scraps here and there that i'd need to pick up like hygrometers etc but really was looking for suggestions on the hydro method and the ventilation. I don't mind using a large expensive fan if it means that I can run it on a variable speed and keep the decibels down but having not seen the larger ones i don't know if that would impact on my grow space too much or not. With regards to the hydro, those 2 are the best that would fit inside the tent, the E+F is...

Size: 1200mm x 695mm x 240mm
48? x 27.5? x 9.5?

Tank Volume: 123 Litres

The NFT is....

Size: 1200mm x 1060mm x 215mm
47.5" x 42" x 9"

Tank Volume: 100 Litres

I'm leaning towards the NFT as it uses the space better but will bow to wisdom of RIU! Thanks for the help guys.
 
I'm getting advice before I buy my equipment so pics would be a little difficult :)

Go to Hydroponics section and read the entire thread..."Harvest a pound every three weeks" I have set up a similar system in my dr120. Specifically, all you need is the flower system detailed on page 75. Modify it to hold six or eight plants. This system is a hybrid/aeroponic. The thread is an education and a lot simpler and cheaper than even ebb and flow whic I started with.
 
Back
Top