MrBoombastic
Active Member
I have a 1000w MH Bulb and I have 16 sq. ft. of space so i want to build a 4x4 flood tray. If anyone has any ideas please post them. Thanks.
Build Your Own 4'x4' Flood Tray? Anyone Know How To Make One?
- Thread starter MrBoombastic
- Start date
mogie
Well-Known Member
Al B. Fuct
once had a dog named
Most people use molded plastic flood trays on aluminum tubing stands.
If you can't get any or want to use materials on hand, you could build a frame out of 2x4 and put a floor of plywood or particle board in it. Line it with a waterproof plastic sheet or old waterbed liner. Fit two PVC plastic tubes through the floor, one extending a couple inches above floor level as an overflow. Set it up on concrete bolcks and put your reservoir tank under it. And away you go!
If you can't get any or want to use materials on hand, you could build a frame out of 2x4 and put a floor of plywood or particle board in it. Line it with a waterproof plastic sheet or old waterbed liner. Fit two PVC plastic tubes through the floor, one extending a couple inches above floor level as an overflow. Set it up on concrete bolcks and put your reservoir tank under it. And away you go!