haze010
Well-Known Member
Clearly he understands the finer points of this more than i do and you should put more weight in his opinions. Im just a pothead who is geeking out on light technology, lmao.
Bridgelux EB Series Build
- Thread starter brahbbyB
- Start date
SPARC
Member
Is anyone running these strictly for veg? I was thinking about running 8-10 of the 562d strips at 700mA to create an efficient 3x3 veg light but wanted to see what others thought. I have COB fixtures for flower so I want these to be for veg only.
The hlg-185h-c700 can easily run 10 strips and stay within the molex connector limits. I could run them at 1050mA for the same price but according to the datasheet very little is gained by ramping up the current.
The hlg-185h-c700 can easily run 10 strips and stay within the molex connector limits. I could run them at 1050mA for the same price but according to the datasheet very little is gained by ramping up the current.
haze010
Well-Known Member
If you look on page 38 goodro wilson described the veg light he built when i asked him about it. im sure theres a couple others buried somewhere in this thread. i think his clone/mom light was eb strips and his veg light qb boards. Essentially a QB board and samsung H are the same guts just in different configurations.
Again, new guy learning but assuming he understands it right, if you jump from 700mA to 1050mA its approx a 30% more power draw. You will end up having a lower efficacy tho so the actual jump in light would be closer to like 20-25% more with the losses being put out in extra heat. The thing is where its a veg light you dont want the kind of light you would for flower so i would agree that the softer would be better for veg. More knowledgeable ppl can correct me if thats wrong but things like a 100w light for veg vs 400w in flower is more the norm i believe.
Last edited:
nogod_
Well-Known Member
I am building a veg light at the moment out of spare parts and 5000k EB strips @500mA. I have a new round of clones showing roots so should be a solid test batch
MrTwist1
Well-Known Member
They change their prices all the time. I have a bunch of Samsung influx L04 that I picked up for like $7 each.
haze010
Well-Known Member
Good to know, guess i need to just be patient but have a quick trigger finger when it hits the numbers i like. What made me think it was an error is that for all the different H series strips in different lengths and temp colors only one went down in price and 2-3 days later it matched all the other color temps.
Randomblame
Well-Known Member
BTW,
These F-Series strips, gen.3 are a really good find, 72 SMD561c instead of just 48 and still $ 1 less!!!
Seems Samsung has a better yield on top bins, which would explain the cheaper price.
If they use the same binnings (S6), then 4 strips ( 4x72 = 288 ) can adequately replace a quantumboard / 54v ( 8x36 = 288 )
I've made a quick comparision with Sammy's online calculator tool. Price for strips are from digikey(>25pcs) to replace 6 boards.
F-strips are in 8S9P configuration so at 700mA each 561c is running with ~10mA less or 77,8mA for a good 2,5lm/w plus in efficacy.
QB/54v have 18S16P config so at 1400mA each string gets 87,5mA.
Seems we have finally find a cheaper solution..
The only shit is, they are listed, but nowhere available, LOL!
These F-Series strips, gen.3 are a really good find, 72 SMD561c instead of just 48 and still $ 1 less!!!
Seems Samsung has a better yield on top bins, which would explain the cheaper price.
If they use the same binnings (S6), then 4 strips ( 4x72 = 288 ) can adequately replace a quantumboard / 54v ( 8x36 = 288 )
I've made a quick comparision with Sammy's online calculator tool. Price for strips are from digikey(>25pcs) to replace 6 boards.
F-strips are in 8S9P configuration so at 700mA each 561c is running with ~10mA less or 77,8mA for a good 2,5lm/w plus in efficacy.
QB/54v have 18S16P config so at 1400mA each string gets 87,5mA.
Seems we have finally find a cheaper solution..
The only shit is, they are listed, but nowhere available, LOL!
Attachments
Last edited:
Baudelaire
Well-Known Member
You really can't help yourself can you? Nobody owes you an apology for your ignorance and unwillingness to learn. My read of the chart is correct. You can run those strips at max current all you want. It's your choice - something spoon-feeders always have difficulty with. But efficacy and lifespan will suffer. Good luck with your project.
-b420
BuddyColas
Well-Known Member
Good research! So with current strip offerings from any vendor, what would you use to make a QB like fixture?BTW,
These F-Series strips, gen.3 are a really good find, 72 SMD561c instead of just 48 and still $ 1 less!!!
Seems Samsung has a better yield on top bins, which would explain the cheaper price.
If they use the same binnings (S6), then 4 strips ( 4x72 = 288 ) can adequately replace a quantumboard / 54v ( 8x36 = 288 )
View attachment 3934177
I've made a quick comparision with Sammy's online calculator tool. Price for strips are from digikey(>25pcs) to replace 6 boards.
F-strips are in 8S9P configuration so at 700mA each 561c is running with ~10mA less or 77,8mA for a good 2,5lm/w plus in efficacy.
QB/54v have 18S16P config so at 1400mA each string gets 87,5mA.
Seems we have finally find a cheaper solution..
The only shit is, they are listed, but nowhere available, LOL!
nogod_
Well-Known Member
EB strips are the only way to get there for cheaper until the price drops again on the H-series or the F-series becomes available.
Otherwise the QB's are the best value.
Otherwise the QB's are the best value.
Randomblame
Well-Known Member
Hey Buddy!
Assuming I wanted to build a 300w lamp, I would take 24 F-series strips of 560mm and an HLG-320H-C2100B.
I would always connect 6 strips in series and the whole 4 times in parallel.
Would be about 135v and 525mA per cluster, efficiency: 58%, 284w net., 302w total, 175PAR/w..
Last edited:
haze010
Well-Known Member
Really? Thats how youre going to handle yourself? Thank you for your ever insightful post, you are a gentleman and a scholar. *rolls eyes*
nogod_
Well-Known Member
You are pure cancer and you have contributed nothing to this subforum but a shitty attitude.
If you wander into a room and everyone seems like an asshole, its probably you. Remember a few days ago when you promised to disappear and never post again?
If you wander into a room and everyone seems like an asshole, its probably you. Remember a few days ago when you promised to disappear and never post again?
haze010
Well-Known Member
Yes yes im a cancer *rolls eyes* Any more insigtful comments youre full of them.
Randomblame
Well-Known Member
Holy Moly, what's up here guys?
Why are so attacking? Why not just ignore ...?
Each thread is in the meantime full of quarrels and quarrels...
I remember better times 1 or 2 years back without so much BS in each thread....
We lost many, highly qualified members because of such behavior!
If you come here to get interesting knowledge about LED's, good! If you try to give others your knowledge, well, too!
BUT ... if you are looking for quarrels or just fill the pages with provocative utterances like trolls,
you should look elsewhere and go outta here or simple shut the fuck off...
I do not call names, but everyone who feels touched should go and think about his behavior.
We all love this forum because of all the fundamentale knowledge about LED's. Not comparable to other forums, where mainly obsolete blurple technique is used.
Please try to follow the rules of polite conversations and try not to offend others!
Why are so attacking? Why not just ignore ...?
Each thread is in the meantime full of quarrels and quarrels...
I remember better times 1 or 2 years back without so much BS in each thread....
We lost many, highly qualified members because of such behavior!
If you come here to get interesting knowledge about LED's, good! If you try to give others your knowledge, well, too!
BUT ... if you are looking for quarrels or just fill the pages with provocative utterances like trolls,
you should look elsewhere and go outta here or simple shut the fuck off...
I do not call names, but everyone who feels touched should go and think about his behavior.
We all love this forum because of all the fundamentale knowledge about LED's. Not comparable to other forums, where mainly obsolete blurple technique is used.
Please try to follow the rules of polite conversations and try not to offend others!
Last edited:
haze010
Well-Known Member
I could really care less what some random douche says to me on the internet, he wants to call me a cancer i'll just roll my eyes and laugh some more. I'm not here to quarrel, i was given bad advice, i questioned said bad advice, and ever since then nogod and baud have repeatedly attacked me. I find it amusing to be honest. Ive done nothing but have conversations about LED in this forum until i was attacked and i still dont understand why, to me its just funny tho. Their life offline must suck pretty bad if this is how they behave.
Last edited:
Randomblame
Well-Known Member
Yepp, but it's the sound which makes the music...
And I mean it generally not only to you or the other two ..
There has developed an aggressive undertone over the past years, so it seems everyone is just waiting for a wrong or incorrect advice to point it out aggressively.
New users were dissed because of their ignorance and established users were critized as "acting like a teacher" and their knowledge was questioned too. Seems only a few are really ready to learn something new, which is a pity, because there is still so much out there.
My God,
seems I am too much harmony addicted today... LoL!
And I mean it generally not only to you or the other two ..
There has developed an aggressive undertone over the past years, so it seems everyone is just waiting for a wrong or incorrect advice to point it out aggressively.
New users were dissed because of their ignorance and established users were critized as "acting like a teacher" and their knowledge was questioned too. Seems only a few are really ready to learn something new, which is a pity, because there is still so much out there.
My God,
seems I am too much harmony addicted today... LoL!
haze010
Well-Known Member
Yep, i came here asking for help and trying to learn, all i got was condescending attitudes like i should already understand it all and if i dont i'm "spoon fed" when clearly ive spent 20+ hours of research and consistently asked intelligent questions. I was given what i thought wasnt right advice, asked for more feedback and then have been repeatedly attacked since. My patience is gone with those jerkoffs and i will not be polite to them anymore. Now im a "cancer" because of it. This is all because of 3 particular people and only in this one thread. everyone else around here has been awesome.
PicklesRus
Well-Known Member
I dont know exactly what went down but your language and attitude towards others is kind of upsetting. Youre keeping on about issues youre having with other members - just drop it.