Assembly Problems |HLG-600H Quantum Board LED Kit V2 [Solved]

[Dr.Indica]

Hello Guys,
longtime lurker here but i now finally made an account and already got a question for u LED Heads.

I recently bought me the hlg-600h and connected everything but it just wont fire up and i dont know why.

i attached some pictures, maybe im stupid and dont see the problem

 

[SMT69]

Nice light...

Do you have a multi meter? check v coming out dc side going to strips

Which driver is that exactly , ends with A or B (does it have a remote pot for dimming) or 2 pots built into the driver to adjust volt/current

(check the wall plug-green grnd, red is power, blue nuetral)

 

[Dr.Indica]

Its the HLG-600H-54B , i dont have a multimeter :/

i has no pots, neither on the driver or attached to the potentiometer

 

[Dr.Indica]

here is a picture of the dc to ac connector

 

[maxlev]

That driver has 2 outputs
output a for 2 boards in series
output b for 2 boards in series
a & b boards must not be connected to each other

& dc is not connected to ac
that is the drivers job

 

[Dr.Indica]

That driver has 2 outputs
output a for 2 boards in series
output b for 2 boards in series
a & b boards must not be connected to each other

& dc is not connected to ac
that is the drivers job

Really ? am i this dumb? i cant believe it

how do i set up a 2 board series? sorry for the dumb question omg

 

[Dr.Indica]

That driver has 2 outputs
output a for 2 boards in series
output b for 2 boards in series
a & b boards must not be connected to each other

& dc is not connected to ac
that is the drivers job

i connected them as u said but they are still not working

 

[Stephenj37826]

All boards go in parallel. Hook first output red to first board + and black to - .... Run that boards + to second boards + Run first boards - to second boards -. Repeat this with the other output and board 3 and 4. AC side is brown to black green to green and white to blue ... Matching the slug colors. That's it

 

[Dr.Indica]

All boards go in parallel. Hook first output red to first board + and black to - .... Run that boards + to second boards + Run first boards - to second boards -. Repeat this with the other output and board 3 and 4. AC side is brown to black green to green and white to blue ... Matching the slug colors. That's it

THANK YOU SO MUCH <3<3<3

you are my personal hero!


ps : GOD DAMN THESE THINGS ARE BRIGHT AS FXK

 

[Aolelon]

All boards go in parallel. Hook first output red to first board + and black to - .... Run that boards + to second boards + Run first boards - to second boards -. Repeat this with the other output and board 3 and 4. AC side is brown to black green to green and white to blue ... Matching the slug colors. That's it

Why do you guys still have no schematic online for assembly instructions? I still have yet to see q video, or drawing, or anything on how to put this thing together. and its come up quite a bit already..

 

[Dr.Indica]

Why do you guys still have no schematic online for assembly instructions? I still have yet to see q video, or drawing, or anything on how to put this thing together. and its come up quite a bit already..

The struggle is part of the DIY experience haha.

But yeah, atleast a hint like assemble in parallel or something like that would have been a great help