Anyone know what caused this???

#1Raiderfan420

Well-Known Member
There are only a couple leaves that looked like this..none as bad as this leaf..I haven't started nutes yet..temp is between 78-82..50% hum..water is R/O filtered..anyone know what's up with this leaf burn?
 

Attachments

  • Leaf burn comp.jpg
    Leaf burn comp.jpg
    55.5 KB · Views: 56
what's the underside look like? any mites? what type of medium are you growin in? how old is the plant?
 
possibly a ph issue

Good call..I watered yesterday and the ph even with air stones is 7.3 , I figured the air stones and letting the water sit in the storage container for 24hrs before watering would decrease the ph, but it hasn't. I heard that after I add nutes that the ph should drop..any truth to that?
 
what's the underside look like? any mites? what type of medium are you growin in? how old is the plant?

No mites that I have seen..I also treated with Azatrol yesterday..could that have done it? It is only on a couple of the lower fans only on a couple plants.
I am growing in B'Cuzz coco coir..clones were moved to the coco 5 days ago...
 
hmmm...coir is inert...so the nutes and pH may be off... 7 and up is too high pH... try to shoot for 6.5

GH flora series nutes are great pH buffers... i soak my rockwool cubes in GH nutes to lower the pH...so i would assume the same would apply
 
yea its probably a ph problem... ur not supposed to change ur ph by a lot each day, just like .3 a day.... happened to me just not as bad.
 
yea its probably a ph problem... ur not supposed to change ur ph by a lot each day, just like .3 a day.... happened to me just not as bad.

Really? Damn..well I am starting nutes next watering tomorrow..hopefully that will bring down the ph. Bummer, it isn't bad, but they are so pretty I hate to see them with their burnt little leaves..lol
 
hmmm...coir is inert...so the nutes and pH may be off... 7 and up is too high pH... try to shoot for 6.5

GH flora series nutes are great pH buffers... i soak my rockwool cubes in GH nutes to lower the pH...so i would assume the same would apply

Yeah, I am hoping that the ph comes down when I start he nutes..I am adding the nutes tonight to the storage, so I'll test it a few hours after I mix and see where I am at.

Thanks for the info
 
my pH out of my tap is at 6.8

my res is at 6.3 after adding my nutes...what nutes are you using? and do you have a schedule to follow?
 
my pH out of my tap is at 6.8

my res is at 6.3 after adding my nutes...what nutes are you using? and do you have a schedule to follow?

My tap is 7.5 and after the nutes it dropped to 4.8. I am using H&G Cocos A & B, Root excel, and drip clean.. I am using 70% of there recomendation the chart for now..the ppm is 0 before and 194 after nutes
 
My tap is 7.5 and after the nutes it dropped to 4.8. I am using H&G Cocos A & B, Root excel, and drip clean.. I am using 70% of there recomendation the chart for now..the ppm is 0 before and 194 after nutes
whoa whoa whoa...4.8?! Yikes...there's your problem right there....
 
whoa whoa whoa...4.8?! Yikes...there's your problem right there....

That was after the nutes though..I watered before I added the nutes..I know I am guess I am going to have to get some lime or something to bring that ph up.
Crazy it dropped so much with nutes..you know I didn't check the ph tonight before I added nutes to the water storage..last night it was 7.5, could it have dropped that much over night or did the nutes do it?
 
never heard of pH dropping that low so quick...do you have pH up and down?

What does that mean? If you mean do I have a soil meter, I do not. I have a Hana combo meter. I figured since I am using coco, if the food is right I would be good.. do I need to get a soil meter? Do you think I should drain my 50 gal water storage and start over or try to bring the ph up?
 
wait...i thought you had a water resevoir...??? I'm confused

Sorry , let me back up..
I have a 50 gallon water storage that is fed by a R/O filter..this is gravity fed to my room where I hand water every other day
I transplanted the clone 5 days ago from 6 oz pots into 7 gal smart pots with coco.so I have only been adding water for the last 5 days..
I added the nutes tonight and have not fed it to the plants..I will do that tomorrow night
Sorry for the confusion
 
Sorry , let me back up..
I have a 50 gallon water storage that is fed by a R/O filter..this is gravity fed to my room where I hand water every other day
I transplanted the clone 5 days ago from 6 oz pots into 7 gal smart pots with coco.so I have only been adding water for the last 5 days..
I added the nutes tonight and have not fed it to the plants..I will do that tomorrow night
Sorry for the confusion

Also, I am using coco coir.
 
o i c now...so, you add the nutes to the big h20 drum? if thats correct, then you def only want the pH of your H20 to be around 6.0 to 6.5

pH up and pH down are both liquid pH buffers...

Just my $.02 tho, arent you going to be wasting alot of nutrients this way?
 
Back
Top