Anyone know of a 4x4 tent that is shorter than 80inches ?

Yagirlsheugly

Yagirlsheugly

Active Member
Have fluence spyders but the 4x4x80 tent is too high for my ceilings and won’t allow me to vent properly ... so with the spyders being able to be closer than most lights to the canopy I’m trying to find a 4x4 tent this on the shorter side but googling as well amazon and eBay have not showed anything. I did come across the guerilla brand tents except those are super expensive lol. Any help would be awesome thanks
 
Renfro

Renfro

Well-Known Member
Why do you need to vent out the top? If you can setup the tent in the space you have and vent off the side port at the top wouldn't that work? Thats how mine is setup.
 
Yagirlsheugly

Yagirlsheugly

Active Member
Renfro said:
Why do you need to vent out the top? If you can setup the tent in the space you have and vent off the side port at the top wouldn't that work? Thats how mine is setup.
Click to expand...
It would def work not saying it wouldn’t just the way that the area is built that I want to put the tent in , is literally the same size as the tent length and width size so the top is my only dimension that I could change without sacrificing my pockets on another light..I have fluence spydrx plus fixtures so I can’t get away from the 4x4 due to the the size of the light ugh....
 
Renfro

Renfro

Well-Known Member
Makes sense now. Maybe skip the tent and put a zipper door on that area? Then vent above the zipper door? Trying to imagine the space you are working with.
 
Yagirlsheugly

Yagirlsheugly

Active Member
Renfro said:
Makes sense now. Maybe skip the tent and put a zipper door on that area? Then vent above the zipper door? Trying to imagine the space you are working with.
Click to expand...
The space is like an indoor porch I guess you can call it .. although it’s not really a porch just kind of like a sunroom area but the space width wise is a bit bigger than 4x4 so the side vents I would be able to get venting tubes out of the tent ...
I mean I could Probly just run the exhaust fan/filter without the hvac tubing
 
SheeshM

SheeshM

Well-Known Member
I have a 4X4X80 but needed to move it from the basement to the attic. The attic ceiling is too short for 80 so I cut about 8" off the tent poles. I had to roll the excess tent fabric up and stuff it on the top of the tent the best I could. It's not the greatest solution but it works for me. The one thing I haven't done is order new tent poles so if I move to room with a full ceiling I can use the full tent height again.
 
Renfro

Renfro

Well-Known Member
SheeshM said:
I have a 4X4X80 but needed to move it from the basement to the attic. The attic ceiling is too short for 80 so I cut about 8" off the tent poles. I had to roll the excess tent fabric up and stuff it on the top of the tent the best I could. It's not the greatest solution but it works for me. The one thing I haven't done is order new tent poles so if I move to room with a full ceiling I can use the full tent height again.
Click to expand...
Now that is probably the best solution so far.
 
SheeshM

SheeshM

Well-Known Member
Yagirlsheugly said:
True what tool did you use to cut them ?
Click to expand...
Just a hack saw and some Emory cloth to smooth the cut. You can only take a few inches and you'll have to roll the excess fabric onto the top of the tent. I used big paper clamps to make the fabric taut to the frame.
 
You must log in or register to reply here.
Top