any takers?

P

potsmoke831

Member

• Sep 19, 2015

• #1

this started happening.. 6x6 grow room with a 1000w and a 600 w and the temps were getting up to 85 so i took out the 1000... does this look like a heat problem... oh also i left the water pump on for 4 hours on 3 minutes off for a night on accident and yea. could this be related ? thanks

 

Attachments

• 
  20150918_225840.jpg

  1.6 MB · Views: 89
• 
  20150918_225915.jpg

  4 MB · Views: 87
• 
  20150918_225927.jpg

  1.8 MB · Views: 87

shadysmalls

Member

• Sep 19, 2015

• #2

I dont know where to start bro, she looks starving and pretty unhealthy, definite heat stress going on too

 

P

potsmoke831

Member

• Sep 19, 2015

• #3

any advice?

 

shadysmalls

Member

• Sep 19, 2015

• #4

I'd give her a decent nitrogen feed and some sort of b vitamin stress reliever like B-52 if you got any, and raise the light or whatever you can do to lower the temps on her
good luck bro
shady

 

P

potsmoke831

Member

• Sep 19, 2015

• #5

thanks man. i swapped out the lights and ive been feeding her more. i switched to perlite and didnt realize how much they needed. thanks for your time

 

Flagg420

Well-Known Member

• Sep 19, 2015

• #6

Dial in the room b4 getting too much further, hope ur in veg still....

Figure out how to cool it, run the 600 while the plants small, after its 3ft of so (or at flower) then flip the 600 off n the 1000 on.... or just run the 600....

 

Flagg420

Well-Known Member

• Sep 19, 2015

• #7

anything else but perlite?

 

P

potsmoke831

Member

• Sep 19, 2015

• #8

i have some coco doing real well.. i can upload pics if you'd like... had some over watering issues with them to.. room is as dialed in as it could be... you can only foresee so many problems... i have a 600w MH and a 400MH in a 6x6 room with 8 perlite and 13 coco.. perlite are auto fed and the coco is hand fed. right now the coco is at 900 ppm and getting water at 5.8PH.. in the process of letting them dry out... the perlite is around 680 ppm and they are in the second week of being in the perlite.. 5.8-6.0 ph for those guys... i was wondering why the Run off comes out higher.. at like 6.3... no i did not flush either perlite or the coco

 

P

potsmoke831

Member

• Sep 19, 2015

• #9

bump

 

P

potsmoke831

Member

• Sep 19, 2015

• #10

big ol bumpp of cocaine... BUMPBUMP

 

Briesenberg28

Active Member

• Sep 19, 2015

• #11

have u moved the light away? what all is in your soil mix. all i see is perlite?

 

P

potsmoke831

Member

• Sep 19, 2015

• #12

the coco is just coco and a little perlite.. not soil.. just perlite and a coco set up.. yes changed out the lights with 2 600w MH

 

BobCajun

Well-Known Member

• Sep 19, 2015

• #13

Maybe try lowering the pH to 5.2-5.5. I use tartaric acid powder myself. If I put too much I add some calcium carbonate powder to bring it back up. I got it at a brewing store. Suppose I should get some real pH up and down products sometime.

 

Last edited: Sep 19, 2015

P

potsmoke831

Member

• Sep 19, 2015

• #14

what would lowering the Ph do