AGLEX 2000w, yield guesses?

So I have an AGLEX 2000w, about 500 ish or so from the wall I think. I have a grow journal for it but below are the pics from first day I got it but after I transplanted, to this morning before lights went out. She is now in a 4.5x4.5 tent, 400cfm air in 450 com out (restricted through filter). Any guesses on what my yield will be? How much would my yield increase if I added say 3 1800w cobs (300w ea from wall), so total from wall would be 1400. Just switched to 12/12 one week ago
https://www.rollitup.org/t/first-grow-it-has-been-interesting.993872/

Bout a pound...

Approximately 454g

Roughly 16oz

7 oz's dry and trimmed

Madmungo said:

Approximately 454g

Click to expand...

Hehe I like it, over a pound.

I’m ordering 4 ea 100W boards with the 301b chips, should be here sometime next week. That should raise the yield a bit

Ok got 4 of these should be here tomorrow, so, with 3 of these and the AGLEX, think I can hit 750g? I’ll be using the 4th board to start my veg tent

3 new lights hung, should increase my yield yes?

3 weeks into flower, is 1lb still a good number or did I screw up by not trimming enough fan leaves off. Is it too late to trim some more?

Powertech said:

3 weeks into flower, is 1lb still a good number or did I screw up by not trimming enough fan leaves off. Is it too late to trim some more?

Click to expand...

Looking good mate

Powertech said:

Ok got 4 of these should be here tomorrow, so, with 3 of these and the AGLEX, think I can hit 750g? I’ll be using the 4th board to start my veg tent

Click to expand...

I would say theres about a 10% chance those are real Samsung lm301b diodes. Spider farmer is a generic company.

I really love the ignore button on here and how it deletes douchbag replies

whytewidow said:

I would say theres about a 10% chance those are real Samsung lm301b diodes. Spider farmer is a generic company.

Click to expand...

10% might be a little generous even if they are 301b it's probably the worst bin available.

Don't expect more than a lb

Powertech said:

I really love the ignore button on here and how it deletes douchbag replies

Click to expand...

NEWS FLASH: Chinese sellers frequently lie. Consider the possibility that a member with 17,000 likes might know something.

It is entirely possible that the diodes are not real LM301B, they could certainly be lower bin or LM351C. It has happened more than once.

I have the same type set up with a cheap 2500w LED... if my entire 4x4 tent is filled wall to wall I get right around a pound. Im not doing anything crazy or too involved like some people do so im sure you could pump out a better yield with a bit more effort but just minimal plant maintenance I say your looking at around a pound

With questionable diodes, you can start with a baseline on 1/2 gram per watt and adjust from there. Limiting factors can be the numbers of plants, size of containers and grower experience.

I personally cropped a nearly 2 lb plant indoors (dried and trimmed) but that's really hard to get and since then I have a hard time getting over 20 oz a plant.

Powertech said:

Any guesses on what my yield will be? How much would my yield increase if I added say 3 1800w cobs (300w ea from wall), so total from wall would be 1400. /

Click to expand...

Around here, we go by actual watts. If it pulls 300w, it's a 300 watt light. 1400 is way to much for a 4.5 x 4.5, use around 650w with efficient LED and 1000w with blurple.

Powertech said:

3 weeks into flower, is 1lb still a good number or did I screw up by not trimming enough fan leaves off. Is it too late to trim some more?

Click to expand...

Day 21 is a good time to do the second de-fo. Couple days later wont hurt . leave some i recommend.
Looks good!

growingforfun said:

With questionable diodes, you can start with a baseline on 1/2 gram per watt and adjust from there. Limiting factors can be the numbers of plants, size of containers and grower experience.

I personally cropped a nearly 2 lb plant indoors (dried and trimmed) but that's really hard to get and since then I have a hard time getting over 20 oz a plant.

Click to expand...

Thank you. 1/2 gram per actual watt would put me at about 350g, but I’ll adjust up just a bit to account for the genetics so I’ll take just under a lb.