99% ISO hash abortion HELP I FUCKED UP

Here's the short version of my problem. I bought a bottle of 99% ISO alcohol and gathered up about 50 grams of trim and such. I froze my trim jar, alcohol, trim in the freezer. Poured the cooled alcohol in the jar with the trim, shook 45 seconds. Poured contents of jar through spaghetti strainer. Poured resulting liquid through a filter/funnel into a Pyrex. The super cold trim contaminant and kief kept sticking to all the equipment and filter, so I needed to use more alcohol to clean it off. Then I ran out of alcohol. Eventually I started using water to rinse. (I'll just let it evaporate I thought, I could have done this with 70% alcohol, so water should be fine) Eventually everything in the filter system got logged with gunk, and I pretty much brewed a strong tea towards the end and it got into my Pyrex. The water to alcohol ratio made it less potent than vodka I'd estimate for the last half of the run. Filter broke. Finer particulate plant matter seeped in. Couldn't get materials in time to do anything futher. Now I have a Pyrex of brown sticky liquid. A mixture of the original extraction, plus this "tea" and water and fine plant particles. So I let it set 3 days to see if it would reduce. Not much evaporation. Put Pyrexdouble boiler earlier. No more, or very little alcohol left since I brought substance to a boil eventually. Now liquid is pretty much and smells like burnt weed tea. Sides of Pyrex is sticky/burnt kind of from heat and fine trim from the original waterline all the way down. Resulting reduction smells and looks like muddy water. Sticky bottom. Dark, very dark. Fine plant matter. What have I created? It's gross. I wanted QWISO hash and this became garbage. Can I get more alcohol and use it as a solvent and give the entire Pyrex a wash, sides and all, run it through some coffee filters, and do something with the resulting liquid? Strain it completely and increase the alcohol volume substantially and let it dry out in a new Pyrex and see if there is anything salvageable? There has to be a decent amount of THC somewhere here.

You could clean the dish with alcohol run it through a filter again but i wouldn't cause you wont get rid of the dark colour and i will probably be harsh cause it might burn do to the fact it was cooked down once. I would just use the alcohol for a new batch and throw your mess away

honestly... if you run iso through it all again... i wouldnt worry bout freezing anything at this point... probably better to do a warm run anyways... then filter it all (cut the bottom off of an isopropyl container and plug the neck of the bottle with a cottonball from the inside)... then double boil your solvent off.. it would prob still make some oil worth medicating with...

i have fallen asleep while double boiling before and had to do this...

i will admit though... your oil is not gonna be the best... you should def try again at making good earl... and use 99% isopropyl if you can (any pharmacy can usually get you some next day if you ask them to)

thanks for the laugh. I was just imagining a monkey trying to make qwiso. sorry. im laughing with you not at you.

Roflmfao, wow isopropyl is so ghetto, I would use it to clean my vessels between extractions by pressurization, bleed the isopropyl, then make this b-bag bait for these youngsters who had sticky fingers. Lol, they thought maybe I was losing my touch, giving them the satisfaction they were jacking me, and stayed in the game by laughing last. I would tell them where's the dare ya dab? Idk if they got it or what, but the bomb stayed on me, and they couldn't get enough bait. The more I would make, the less I had,so I kept rinsing my vessels between uses just for them. It was fun and they had me working. Like one out of every 5 dabs was authentic. But if you want to jack me, I made it fun when they came up on a two gram bottle of real top grade stuff, they now became snickers rich in placibo oil. The shit I wondered, am I even high and ruined virgin marijuana batches w isopropyl. Isubutane is better than Power 5 or 7.

i would argue smoking butane is ghetto. But dont you go on and on about your awesome CO2? Honestly cant understand half the shit you spew. Ive seen threads saying you charge money to teach people methods and then dont teach them everything you know. You like to come into threads and tell everybody they are stupid and then offer no good advice. now it seems like you are talking about selling stuff to kids. (not really sure since your grammer and sentence structure is terrible) Impressive. And not only that but ripping people off. You sir are a scumbag.

ilikecheetoes said:

i would argue smoking butane is ghetto. But dont you go on and on about your awesome CO2? Honestly cant understand half the shit you spew. Ive seen threads saying you charge money to teach people methods and then dont teach them everything you know. You like to come into threads and tell everybody they are stupid and then offer no good advice. now it seems like you are talking about selling stuff to kids. (not really sure since your grammer and sentence structure is terrible) Impressive. And not only that but ripping people off. You sir are a scumbag.

Click to expand...

Really? Sounded to me like the kids were ripping him off, and he headed them off at the pass. Genius I say.

I agree that iso is ghetto. That doesn't stop me though. At $3 a bottle, sometimes ghetto is better than nothing.

Butane scares me, so I stay away. I prefer Ethanol, but 190 proof is illegal here, and I'm yet to drop a couple hundred on a case of the stuff shipped.

Ive seen/smoked ISO products that looked,tasted, smelled, purged way better than BHO products. And vise versa, Its all about how the person extracts and purges it. Just like how 2 people could grow the same exact strain from the same exact breeder and come out with 2 completley differnt plants. Its not about the solvent folks, its how you use it!

I partly agree w that statement. Its more the solvent doing the job. The person in charge of splitting the ratios of cosolvents has all responsibilities of a good or bad extracion. Co2 is totally different then pumping tane through some plant matter. So one can fuck up a co2 extraction rather easy. No luck and all skill is the nature of this beast.

You should definitly use a distillation set up. I have an iso2, but that shit sucks for making iso or ethanol oil. Its becpauase its higher in cytotoxins by a factor of 200% in comparison to co2.

PJ Diaz said:

Really? Sounded to me like the kids were ripping him off, and he headed them off at the pass. Genius I say.

I agree that iso is ghetto. That doesn't stop me though. At $3 a bottle, sometimes ghetto is better than nothing.

Butane scares me, so I stay away. I prefer Ethanol, but 190 proof is illegal here, and I'm yet to drop a couple hundred on a case of the stuff shipped.

Click to expand...

oilmkr420 said:

You should definitly use a distillation set up. I have an iso2, but that shit sucks for making iso or ethanol oil. Its becpauase its higher in cytotoxins by a factor of 200% in comparison to co2.

Click to expand...

I know, I would like to distill. Not sure how safe it is really. Also, the space is tough. I think I would prolly just spend a couple hundred bucks on a case of everclear instead.

Is there some reason the cytotoxins won't evap off? 200% sounds like a lot, but it's really just 2x. If co2 is low in cytotoxins, then double that is prolly ok, right?