8 X 12 SOG Grow Room Finished

Got the room built now I just need to run the 240 for the lights this weekend and then start building my flood tables. It will have (2) 8 X 3.5 tables and (1) 4 X 4 table . Similar to Al B's setup except the rooted clones go to the 4 x 4 for 3 weeks then off to a 8 ft table for six weeks and replenish the 4 X 4 with new clones for 3 weeks and off to the next 8 foot table and refill the 4 X 4...ect, ect, ect. Will have pics of finished setup in a few weeks

HELLLLLLLLLL ya. I just finished an 8x4 room I cant wait to be COMPLETELY finished with it. Yours looks great!

Very nice work. I went to school for construction and it looks good. You might want to go with a heavy duty door and lock if anybody has access to that area but you though. They make some nice keypad, and even fingerprint reader locks for around 80 bucks. Good luck with your grow!!!

Nice grow room , Keep us posted and post Pics when you start to grow . Would love to see it in work
Green Dave

I see the garage opener is that at ground level ? basement type ? looks good bud... what kind of lights do you plan on using

Wow very nice man, cant wait to see more pix

dusty26 said:

I see the garage opener is that at ground level ? basement type ? looks good bud... what kind of lights do you plan on using

Click to expand...

Yes, it's at ground level. I had a 60 bucket hydro setup in a second floor bedroom but the stairs got to be a hassle and tired of water spots showing up on my first floor ceiling every now and then LOL. I got (6) 400 watt conversion lites to spread across (2) 3ft X8 ft flood tables. That should give ample coverage.

tat2ue said:

Yes, it's at ground level. I had a 60 bucket hydro setup in a second floor bedroom but the stairs got to be a hassle and tired of water spots showing up on my first floor ceiling every now and then LOL. I got (6) 400 watt conversion lites to spread across (2) 3ft X8 ft flood tables. That should give ample coverage.

Click to expand...

nice ... what about traffic ? do you have alot of ppl visiting often that go through/by there ? just wondering if you do and they notice this room with a humming / vibrating noise comeing from there lol ?

what do you plan to do for intake and exaust ?

not much traffic..I live in a secluded sub division. with 1 road in and 1 road out. As for venting, I have a 6 in inline fan with carbon filter that will be venting into the attic above my garage. The vented, scrubbed air will be dispersed thru the gable and the houses soffit vents

tat2ue said:

not much traffic..I live in a secluded sub division. with 1 road in and 1 road out. As for venting, I have a 6 in inline fan with carbon filter that will be venting into the attic above my garage. The vented, scrubbed air will be dispersed thru the gable and the houses soffit vents

Click to expand...

nice... should work out fine...

Well my SOG flower room is about 80 % complete. I have built my 3 X 4 E&F starter table and the two 3 X 8 E&F finish tables. The starter table will take rooted clones (48 of them)and start the flower cycle under mixed CFL's (2700K & 6500K) for 2 to weeks and then transfer the best 40 to the finish table. Each 3 X 8 finish table holds 80 net pots and will be covered by three 400 watt HPS lights. Then a new batch of clones goes to the starter table for 2 weeks and again the best 40 again go to the other half of the finish table and I repeat the process till all tables are full.(about 8 weeks) and when the 5 batch of clones is ready to go in the first batch will be ready to come out. Well anyway, Just have a few more loose ends to tie up and waiting for grow upstairs to finish (about 2 weeks and then those lights will be moved to the new room for a total of six 400 watters


All the lights have been or will be rewired to 240volts and run on an independent circuit. I ran ten 120volt plugs throughout the new room to handle all the pumps,fans,air stones,ect....(no more triping over ext cords). New on the agenda and you will want to pay close attention...I am building a DIY natural gas CO2 generator to inject CO2 to all my babys. Heres a few pics of what I have done so far..Critique it if you will

very nice work man!!!

very nice.

Well all 160 slots are filled and will harvest 40 Blue lolly Pops on 4/20

Nicely done!! +rep for all the DIY!
Those blueberry lollipops look great, how long did you veg them?

dman man looks excellent, makes me wanna pay you to come build me one...

that's a really nice set up you got there, keep up the good work

awesome setup mate wish i had the room for a large scale setup

I didn't veg them at all. They went from cut clones to my "DIY" aero cloner till they had good root growth (about 10- to 12 days) and then straight into the new flower room and went straight to 12/12. The size of the clones varied from 5-6 inches to 8 to 10 inches tall when they went to flower. Also a note to anyone using an aero cloner....before you put your clones in your cloner, take a steril razor blade and score the portion of your clone stem about an inch from the bottom up on both sides of the stem just enough to break the outer stem membrane. This will make it easier for new and vigorious root development.