8 weeks and ready to be chopped

leeB

Well-Known Member
the way i grow is using a nft system but this time i wanted to change so i tryed a new way of growing i used rockwool slabs for a change and used 2 1000 watts hids lights leaveing the lighs on allday for 4 weeks instead of 18/6 and then 12/12 for budding and it worked well... tel me what you think?
 

Attachments

leeB

Well-Known Member
i aint got a clue about the yeilds ive any bin growin a year n half still learning alot of new things. this mite be a daft little question but how do you check yeilds and what is it?? there was only 4 in the room i can fit 10 in there but i only done 4 to see if it would work.the plant growed about 4 foot tall and you could just about hug them each plant produced 7oz which i was very pleased about. when i was useing nft systems i was only get 4-5oz each plant and they never went busher as these the nft system is now used for clones and mother plant. i always kept the ph level at 5.8 and the ppm was kept between 1.8 -2.2 never went any higher than 2.2 and i always checked the plant ph -ppm every day because it changes every day eg 1 day i filled the tank up wiv nuets set ph level at 5.8 and ppm at 1.8, next day ph was 6.2 and ppm was 2.4 so i lowerd ph and ppm and done that every day. i didnt have 1 little problem with them they growed beauitful and taste beutiful. lol.. pease get back to me about yeilds i need to master that cause i dont know much about it..
 

hempman45

Active Member
i aint got a clue about the yeilds ive any bin growin a year n half still learning alot of new things. this mite be a daft little question but how do you check yeilds and what is it?? there was only 4 in the room i can fit 10 in there but i only done 4 to see if it would work.the plant growed about 4 foot tall and you could just about hug them each plant produced 7oz which i was very pleased about. when i was useing nft systems i was only get 4-5oz each plant and they never went busher as these the nft system is now used for clones and mother plant. i always kept the ph level at 5.8 and the ppm was kept between 1.8 -2.2 never went any higher than 2.2 and i always checked the plant ph -ppm every day because it changes every day eg 1 day i filled the tank up wiv nuets set ph level at 5.8 and ppm at 1.8, next day ph was 6.2 and ppm was 2.4 so i lowerd ph and ppm and done that every day. i didnt have 1 little problem with them they growed beauitful and taste beutiful. lol.. pease get back to me about yeilds i need to master that cause i dont know much about it..

yield is the amount you harvest from your plants..
 

leeB

Well-Known Member
ok. thats what i use digital scales and each plant weighed in roughly 7oz some was just a little under and some was jus a little over i was well pleased with this crop. 1 of them produced 7 n half oz but when i cloned it it looked the best out of the 4.. these plants are c45. thanks 4 ya advice mate.. now lets get all 10 on the go now and see if tha produces well. ill show you all in 8 weeeks time .lol. or if get any problems that i come across fingers crossed i dont.
 

Attachments

leeB

Well-Known Member
ye that was dry weight i never weighed it when i chopped it i always weigh it after its dryed in future ill weigh it when it gets chopped..
 

leeB

Well-Known Member
what do you think is the best neut for blooming any ideas which as produced the best for you??
 

Rexx420

Active Member
dude, try leaving your crop for another 2 weeks under 12/12 light. (even if the strain finishes in 8 weeks) flush with lots of pure water for final 3-4 weeks. this will give you optimal sugar production and a taste sweeter than candy!
you already got a good thing going though, keep up the good work!
 

leeB

Well-Known Member
ive always flushed them out before chopping. i any use pure water for the last week of blooming so you reackon 2 weeks of feeding pure water then? you know when you feed them water for the last week or 2 do you still have to do a ph check, ive never botherd ive always just left them.
 
Top