400W Mh/Hps Dwc Scrog Lots of Pics

Check Out These BEAUTIFUL Ladies. :joint:Enjoy

day 21 (4).jpgday 21.jpgday 21 (2).jpgday 21 (3).jpgday 21 (5).jpgday 21 (6).jpgday 21 (8).jpgday 21 (9).jpgday 21 (10).jpgday 21 (7).jpgday 21 (11).jpgday 21 (12).jpgday 21 (19).jpgday 21 (16).jpgday 21 (14).jpgday 21 (17).jpgday 21 (13).jpgday 21 (15).jpgday 21 (18).jpg

[video=youtube;fsfqUBwlxik]http://www.youtube.com/watch?v=fsfqUBwlxik[/video]
 
SOOOO.....I need some help. Check the leaves. This happened on my last grow. Ph is 5.5-6.0. I don't have a TDS meter so don't know my PPM, but don't over or under feed. I used to under feed but have been uping the nutes over the last couple of weeks. (if the nutes call for 2tbs/gallon, I'd use 2 gallons, now I use the full strength) So any ideas? Should I water down the nutes?

plant abuse (3).jpgplant abuse.jpgplant abuse (5).jpgplant abuse (4).jpgplant abuse (2).jpg
 
Ray I looked back and can not find what you are using for nutes. My guess is you need to add your micro nutes. Looks like cal/mag to me.

Sure seems to be a common aliment here lately.
 
Ray Ray!!! Either nute burn or cal/mag deficiency if you are adding cal/mag then it could be nute burn. Try diluting it with plain R/O water check in 24 hours.
 
I think I'll dilute the water. I don't have some R/O water. What do you think of water from a dehumidifier? That's what I always use.
 
faithfulmastiff said:
ray i'm lil confused, you said above you was doubling your nutes & here you using correct strength, i'm using same nutes, i found their recomended strength to be just fine, i tried increasing mine & had similar probs,
Click to expand...

I use the reciepe for success that they recommend. I had it watered down....instead of 3tps/gallon I would do 3tps/2gallons. Now I am using full strength (3tps/gallon). I have added some MagiCal with hopes of fixing the problem. Otherwise I will go back to the watered down nutes.
 
Also, I have moved to 10-14. The lights turn on an hour later, and go off an hour earlier. This is to give it more time to put on wieght before the lights come on. It should mimic the fall light cycle. I have about 4 more weeks. So in about 2 weeks I'll go down to 9-15, then 8-16 while flushing. And then 3 days of darkness with a dehumidifier in the room to increase trichome production. Thoughts?
 
rayishungry said:
Also, I have moved to 10-14. The lights turn on an hour later, and go off an hour earlier. This is to give it more time to put on wieght before the lights come on. It should mimic the fall light cycle. I have about 4 more weeks. So in about 2 weeks I'll go down to 9-15, then 8-16 while flushing. And then 3 days of darkness with a dehumidifier in the room to increase trichome production. Thoughts?
Click to expand...


interesting timetable there ray, hope it works out good
 
sounds like a nice experiment.
I'm interested to see if it works! I was under the impression the plant needed some light to store energy to be able to grow at night.
I have heard of the whole days at a time at the end, just curious if it works as stated. Or, has anyone done a side by side night day cycle vs night night cycle.
Not saying it doesn't work, cause if it helps yours out, I'm gonna be right behind ya!
Guess I just gotta do some research, if the answers are even out there yet.
We are the pioneers!!
 
So besides needing help with...mag/cal deficiency or nute burn, my light schedule (10/14), anyone use a vapor skillet? I hate the taste Bic adds to my herb, so...is it worth it? Is it only for hash/oil? Bottom line...is the smoke better than my regular cone slide?

191.JPG
 
rayishungry said:
So besides needing help with...mag/cal deficiency or nute burn, my light schedule (10/14), anyone use a vapor skillet? I hate the taste Bic adds to my herb, so...is it worth it? Is it only for hash/oil? Bottom line...is the smoke better than my regular cone slide?

View attachment 1551632
Click to expand...

saw some youtube videos where they were used (forget shows name) and the guy loved them

+ great thread
 
Dude thanks for the Pic of that vapor skillet. I don't know how it would work for herb but it looks just like what I need for my bubble.
 
You must log in or register to reply here.

Similar threads

Mass Medicinals
Free Grow Equipment (MA/NH - Local only)
Replies
6
Views
889
Mass Medicinals
Mass Medicinals
H
First grow are my plants an ok size?
Replies
5
Views
492
hawkeye83
H
Cobnobuler
MH and HPS 400-600 for sale
Replies
1
Views
510
farmerfischer
farmerfischer
M
Buy a bigger tent or run two tents interconnected?
Replies
6
Views
686
Sade
Sade
T
SCROG Royal Queen seeds, Honey Cream, Special Queen, Cheese in Coco with DIY GLA strips and 315w LEC
Replies
3
Views
611
Swiller
Swiller
Back
Top