1000watt sea of green.. 72 plants

DrGreenFinger

Well-Known Member
i am definitely interested in seeing how this turns out. was considering doing something similar with a scog. BTW, you are on the right track with your fan exhausting. also, research the needed cfm for various room sizes. though that 400 cfm will work for you, it is much more than you need for a 6 x 6 room. the 177 should be more than enough. your fan should be able to completely exchange the air in your room in five minutes. 177 cubic feet per minute multiplied times 5 minutes equals...885 square feet. is your 6 x 6 over 885 square feet (include the height in the equation - 6 x 6 = 36 times the height)? analyze the info you receive. a lot of people are quick to share what they believe to be good info, not considering the possible ramifications if it is not. best wishes.:peace:
 

DrGreenFinger

Well-Known Member
Whats a SOG or SCOG technique.??
:peace::peace::peace::peace:
Sea of Green and Screen of Green. i'd seriously question whether you were getting 2 oz. per plant with these techniques. these are advanced growing techniques that produce less weight per plant, but more weight overall from the grow space.
 

thecloset

Well-Known Member
the fan is venting the light tho not the room... u need at least 200 cfm per 1000 watts as a rule of thumb... u can definitely use the 6 inch pots too plenty of people on this site use them especially for sog... ull just need to flower immediately after ur clones root and do some trimming around the bottom which is what u wanna do with an sog anyway its called lollipopping
good luck
 

DrGreenFinger

Well-Known Member
the fan is venting the light tho not the room... u need at least 200 cfm per 1000 watts as a rule of thumb... u can definitely use the 6 inch pots too plenty of people on this site use them especially for sog... ull just need to flower immediately after ur clones root and do some trimming around the bottom which is what u wanna do with an sog anyway its called lollipopping
good luck
good stuff! :joint:
 

gohydro

Well-Known Member
Another question: will 6 inch pots be enough to flower in? i heard 1 plant per sq ft, but im not sure if that applies to SOG. Any advice greatly appreciated
Hey all,

I'll join your discussion here. I'm growing in a much larger room but the footprint of the grow area is 5x5 which is tucked away in to an alcove within the room. This is lit with (2) 400's and can be expanded to 5x8 footprint with a standby 600w HPS fixture if necessary. I also have a small Mom closet (3x2) with (1) 400 MH elsewhere inside the room. I use a 6" 450cfm vortex fan pulling air in to the room (rather than exhausting it) and rely on leakage to exhaust it. It works great. The major reason is that my furnace is in the same room and I can't create a negative pressure in an area where I want the flue gasses to go up the chimney. Anyway, the outlet of the fan is tee'd and has 1 damper in each branch. One of the branch ducts goes in to the Mom cabinet and is connected directly to the fixture (with the exhaust also ducted out the other side of the closet), and the other branch feeds the flowering area. Right now it's not connected to the fixtures.....just dumping cool air over the plants. I also have an oscillating fan on the floor blowing across (2) 20 gallon DIY Tupperware aeroponic tubs. This seems to be enough to keep the nutes cool without a chiller. Each tub has (2)12" airstones and each tub has (6) 3" net pots for a total of 12 plants under 800w in a 5x5 area. Due to some unfortunate circumstances I had to start from seed rather than clones. I ended up with 5 females.

A lot of questions have been focused around how many plants to grow in that area. Hopefully I'll be able to help with that with pictures shortly. My most recent grow became uncontrollable because I started from seed. Even though I used a indica strain the plants got way too big for the area and started causing all sorts of problems. I wanted to take sexually mature clones (and I wanted to minimize stretch) so I waited until I saw preflowers before I went to 12/12. The plants were about 2' tall at that point. By harvest time they were over 6' tall, and, as with most of us indoor growers, we are limited in ceiling height. Bottom line is that it became a nightmare to control the plants and keep them away from the lights which ended up tight to the ceiling joists. If you're interested in seeing the grow look here Papaya, Hindu Kush Aerotub Journal. I ended up getting about 1lb.

This time I started with 12 clones from my aerocloner (about 6" tall clones) and went directly to the 12hr aerotubs under the 800w of HPS. I'll have all fems and much shorter plants. I plan some sort of SOG. No males this time and much more manageable plants. I'll post pics soon showing the huge difference in the 2 grows.

Good luck!
 

mrmcfly

Active Member
i took 89 clones last night(15 white rhino, 35 mr nice and 39 grapefruit). i need 2 of each strain for new mothers then im putting the best 70 into bud when they have some nice strong roots. hopefully i have the new fan by then as well. its like 50 mins to the closest hydro store and i dont drive. and its hard to get a ride somewhere when u dont want anyone to know what ur doing! anyways, another couple weeks max and well be in business. i know i keep saying it, but ill post pics soon
 

cheetah2007

Well-Known Member
i took 89 clones last night(15 white rhino, 35 mr nice and 39 grapefruit). i need 2 of each strain for new mothers then im putting the best 70 into bud when they have some nice strong roots. hopefully i have the new fan by then as well. its like 50 mins to the closest hydro store and i dont drive. and its hard to get a ride somewhere when u dont want anyone to know what ur doing! anyways, another couple weeks max and well be in business. i know i keep saying it, but ill post pics soon
sounds like a good plan dude :D :D
 

mrmcfly

Active Member
im waiting for my clones to root right now, then im in business. Im gonna get a camera off a friend or something. i cant afford to buy one at the moment, given the money i had to fork out for this op.
 
Top