Search results

  1. Ender87i

    How long can ebb&gro go without water?

    I have a P.O. coming to the house, so I'm taking everything down until after he leaves.. I plan on flooding my ebb&gro bucket system shortly before he gets here and then moving them out and putting them back when its safe. The plants are about 2 weeks old and a foot tall. I plan on doing this...
  2. Ender87i

    Ebb&Gro Young Plant Issues

    I just moved my plants from my aerocloner into my ebb&gro bucket system about a week and a half ago. They are about 1ft tall, and getting flooded every 4-5 hours for 15 minutes. Some of the leaves on a handful of the plants are showing bad signs.. Not sure if its a deficiency or a toxicity or...
  3. Ender87i

    Question about clone lighting

    I don't currently have my fluorescent light set up, so I was thinking about putting my aerocloner with the rest of my vegging plants under my 1000w halide, like off to the side or something.. Will this work? And if so, how far away should they be from the light at a minimum? Thanks.
  4. Ender87i

    Lights on to trim during drying bad?

    So I cut my plants down and hung up all the branches in my growroom.. I know they should be in the dark, so is it bad if I turn on one of the lights to trim here and there over the next couple days? How will it affect them?
  5. Ender87i

    Sediment at bottom of res.. Help!

    I'm using advanced 3part grow-micro-bloom base nutrients.. After a handful of days, you can see what looks like dirt at the bottom of my res.. Assuming this is salt deposits, what can I do about it? I have an airstone in there, and a return line that drops water into it as well.. So why am I...
  6. Ender87i

    Aeroponic/NFT issues?

    I'm running an Aeroponic/NFT system made out of three 8ft long 5x5" hollow white fence posts, laying across a frame made out of PVC, with a slight decline towards the drain side that goes back to the rez.. It has a pump in the rez that splits into 3 lines and runs along each chamber, with...
  7. Ender87i

    Airflow question when drying..

    Couple questions.. I'm gonna be drying by hanging lines in a 8x12 room. 1.) I have a big CAN100 (I think) filter that I have standing up in the room with a 6" fan on top of it blowing air up towards the ceiling to get rid of smell.. Is this enough airflow? Or perhaps too much airflow? 2.) I...
  8. Ender87i

    Dry/Cure Confusions..

    Over the years I've had different ways of drying/curing, but perhaps never got it down to a perfect science.. I have some confusion from reading different books, and hearing conflicting answers. What I usually do is as follows: - Trim fan leaves and small leaves off plant - Cut plant into...
  9. Ender87i

    Branch and internodal bud trimming?

    So my plants are in bloom about week 4. I always get rid of the smaller "branches" towards the bottom of the plant a couple weeks into bloom once I can see their lack of potential, but this time I took it a step further.. I've actually gone ahead and removed roughly the bottom half of each...
  10. Ender87i

    Cloning issues..

    I've tried multiple ways of cloning before.. Rockwool cubes, Oasis cubes, and Aeroponic. The only way that I can seem to get roots to pop out lately is with my homemade aeroponic tub.. But since it leaks (tried 2 different kinds of tubs as well as sealing techniques) I most recently decided to...
  11. Ender87i

    Can I trim roots hanging into the bottom bucket?

    Ok so here's my problem.. Some of my plants have been getting burned leaves and/or signs of nute deficiencies here and there, some worse than others.. I grow in a ebb&gro 12-bucket system (fill and drain) type system, with a 50gal res.. I just switched some of my plants positions with others...
  12. Ender87i

    Best setup for yield in my situation?

    So here's the deal.. I have a room that's about 14ft x 9ft. I can only grow 12 plants total. Maybe 18. I want to go for maximum yield. Keep in mind I'm running 4x1000w and I cannot add any more lights, so that's it. I prefer Hydro.. What's the best kind of system I should run? Right now I'm...
  13. Ender87i

    Does a closed-room CO2 setup need air exchange? (intake or exhaust)?

    My growroom is a closed-room setup. Aircooled, CO2 enrichment, and a well-aerated reservoir. I have been getting mixed answers to the following question: Do i need to have any kind of air-exchange/renewal, fresh intake, or exhaust? Please, if you do not know the answer, dont reply. However, i...
  14. Ender87i

    Help! with my closed-room-setup issues..

    - I am growing in a recirculating ebb&gro 12-bucket fill/drain system. - I have a closed-room setup (NO intake/exhaust... only CO2 and A/C) - My reservoir is very well-aerated! My plants have been having problems lately, and i think i have root rot. Is there anything wrong with not having any...
  15. Ender87i

    Botanicare's COCOROX vs HYDROLITE ?

    I have always used hydroton clay pebbles as my grow medium, but after having to restart a few times recently in a short period of time, ive become tired of having to pre-wash and rinse all of it! Its a pain, so i want to try something new (preferably something i dont have to pre-wash)! Let me...
  16. Ender87i

    Whats your average growth per day in hydro?

    Im growing in a 12-site ebb&gro bucket system. For some reason, my growth rates are slow as hell! On average about 0.35" per day. Im running Botanicare PureblendPro nutrients, and Botanicare additives.. My temps and humidity are perfect, my reservoir is perfect temp, and aerated very well. They...
  17. Ender87i

    Best Beneficial Bacteria product, to replace Voodoo Juice, in Hydroponic system

    Im currently running Voodoo Juice in my Recirculating Hydroponic Ebb&Flow bucket system. Being how expensive it is, im looking for a good product to replace it. What would you guys suggest as one of the best beneficial bacteria products for hydro?
  18. Ender87i

    Hygrozyme Confusion

    I've always heard nothing but GOOD things about the product Hygrozyme, and how great it is.. But i recently posted a thread on another forum regarding Hygrozyme, and it turned into a huge argument about how BAD the product is, and that it causes root rot, etc. etc.. Everybody had nothing but...
  19. Ender87i

    Hygrozyme VS H202

    They are both great products when used at the right times.. But which is better, and when should they be used? The following questions pertain to hydroponic usage, such as ebb&flow. -Should Hygrozyme be used at ALL times and simply added to your reservoir with your nutrients? Or should it only...
  20. Ender87i

    Baby plants got overfed and burned, whats the best thing I can do to help recover?

    I sprouted some seeds in rockwool cubes. Once they sprouted and had their first set of real leafs, and roots showing out the bottom, i transplanted them into hydroton inside of ebb&gro buckets. I fed them according to Botanicares "Week 1" schedule, which was WAY too much. Needless to say, most...
Top