stardustsailor
Joined:
Sep 15, 2012
Messages:
4,398
Likes Received:
9,753
Trophy Points:
313
Gender:
Male

Share This Page

 

stardustsailor

Well-Known Member, Male

    1.  
      greenman5
      greenman5
      Hello, very nice work, do you got a action spectrum chart for Indica strains?
      I am not into LED Lighting but work on a different lighting technology that is able to create all kind of spectra.
      Greetings from Germany
    2.  
      ciuwaax
      ciuwaax
      Hello, i have found nice topic with your very well explained MeanWell LED drivers dimming circuits. I am trying to create alternative circuit diagram with PNP transistor using negative 12VDC PWM output as a signal. The system i have is called Fibaro. Is it possible to use your created circuit diagram with voltage regulator 7810 and PNP transistor 2N3906?
    3.  
      Bobers
      Bobers
    4.  
      soi
      soi
      hey can you msg me i'm trying to build an led grow light to get max effieciency and i wanna know the difference between cree3070cxa and cxb
    5.  
      ch33b
      ch33b
      Thanks for your valuable input..
    6.  
      Greenup
      Greenup
      Hey there I was interesting in seeing cob led lights yours and if you have anything that can take the place of a 1000 hps
    7.  
      robincnn
      robincnn
      Hello. I need some help measuring Tc. I currently use IR thermometer and turn off my COB after 10 mins and quickly read the temp. I do not like this method so much as temp drop 5 degrees every second or even more once i turn COB off. It is not so accurate and i do not know what i am measuring. Could you suggest a thermocouple that i can solder/attach to Tc point on COB or refer to me any thread with thermocuple info.
      1. Abiqua and salmonetin like this.
      2. robincnn
    8.  
      voon
      voon
      Hi,
      Excuse me for my English.
      I need advice regarding construction diy led panel. Is your the actual email [email protected]? I sent you mail from [email protected] Perhaps you do not get angry. It really helps me a lot. Thanks in advance
    9.  
      allinat420
      allinat420
      Hey i wonder if you could give me a tip on which cree white chip to mix with the new cree red 660nm...i was thinkiing of using the cree cree-xte-5w in a 50 50 combination.....but i am not sure what would be the ideal kelvin temp etc...any advice you could give would be greatly appreciated.
    10.  
      thisusernameisnottaken
      thisusernameisnottaken
      Hi how much for the light. Can not send pm?
      1. stardustsailor
    11.  
      tropzy
      tropzy
      Hello man I'm a noob in Uv-b I'm using a 600w HPS on a 4'x4' box I'm start week 6 of bloom and plan to add a 39watt arcadia Uv-b on my box to up THC production by 6h/day trough week 6 to 8. Can you please tell me if 39watt is ok for the box and how high should I hang it? I was thinking 12" up the canopy.. I tried to answer by myself but with my low english it's not easy

      TY A LOT
    12.  
      locoezon
      locoezon
      ΝΑΥΤΗ ΘΕΛΩ ΤΗΝ ΒΟΗΘΕΙΑ ΣΟΥ ΟΤΑΝ ΒΡΕΙΣ ΧΡΟΝΟ!!!

      ΘΕΛΩ ΝΑ ΜΟΥ ΠΕΙΣ ΑΝ ΓΙΝΕΤΑΙ ΑΥΤΟ ΤΟ Τ5 LED TUBE ΝΑ ΤΟ ΜΕΤΑΤΡΕΨΟΥΜΕ ΜΕ WHITE LED CHIPS.

      EΥΧΑΡΙΣΤΩ ΚΑΙ ΕΛΠΙΖΩ ΟΛΑ ΝΑ ΠΑΝΕ ΚΑΛΑ ΜΕ ΤΟ ΣΧΕΔΙΟ ΠΟΥ ΕΙΧΕΣ ΞΕΚΙΝΗΣΕΙ!!!!!!


      http://www.ebay.com/itm/2-SETS-HIGH-POWER-HIGH-BRIGHT-17-LED-T5-TUBE-GROW-LIGHT-FOR-PLANTS-INDOORS-USE-/251542533826?pt=US_Hydroponics&hash=item3a911a76c2
    13.  
      robincnn
      robincnn
      Are you planing to try out CXA3590
      Also any opinion on Cree XPE2 vs CXA
    14.  
      only1realhigh
      only1realhigh
      good day stardustsailor, positivity informed me of this site and a few members that maybe able to help me. I am a first time LED user, built my own unique system, trying to use pot's for dimming control.
    15.  
      thestickyickyicky
      thestickyickyicky
      Hi man, I don't suppose you would care to visit my thread and clear up what I should try and do with regards to LED's? Your input has proven invaluable in my trawling through posts :). Take care!
      1. locoezon likes this.
    16.  
      glennorch
      glennorch
      Hello my friend, I've seen your messages about leds. You have great knowledge and always give good interesting advice. Im going to build my own led lamp. I was going to use Oslon, XPE, LUxeon ES and maybe some XTE for whites. I'm still thinking about the spectrum. Many people had good results with that but some people claim about how useful hyper red 720 and purple (instead of white) or even green could be. Could you give me your advice to choose the leds for my lamp? thanks.
    17.  
      skia
      skia
      Γεια σου stardustsailor θα με διαφωτισεις πολυ με την γνωμη σου. Έτυχε και έπεσαν στα χεριά μου αρκετά leds warm white .. έχω ξεκινήσει από τον Δεκέμβριο εσωτερικά με μια 400αρα λάμπα φθορίου για veg, σύνολο είναι 4 φυτά. Πρώτη φορά είναι και με τα leds και θέλω να μου πείς καμία γνώμη, αν κάνουν κλπ. Θα ήταν καλύτερο τώρα που έρχεται η άνοιξη να τα βγάλω έξω η να μοντάρω χώρο με τα παρακάτω leds εσωτερικά? Ευχαριστώ εκ των πρότερων..


      20 προβολείς http://imageshack.us/photo/my-images/194/led1f.jpg/
      Luminous flux 830LM
      Input power 22w


      και 20 σποτάκια των 10w http://imageshack.us/photo/my-images/46/spotled.jpg/
    18.  
      tenthirty
      tenthirty
      Hi,

      Seems like you know what you are talking about. Very interesting perspective.
      If you haven't seen this yet http://www.icmag.com/ic/showthread.php?t=184932 please check it out.
      A lot of knowledgeable people over there.
      I also have a thread started on building a simple easy home made led luminaire.
  • Loading...
  • Loading...
  • About

    Gender:
    Male

    Signature

    Ca5 Co0 A0 G(2)
  • Loading...