Recent content by Durei

  1. D

    cxb3070 3000k AD 800w draw 4x4 tent

    Nice job, although 800w seems like a very high intensity in a 4x4, wondering if it has advantages over running the same power draw in a 5x5. My last run using 16x vero29's (v1.2) in a 5x5 800w power draw resulted in 1109gr dried buds. This was a completely different growing style though, had...
  2. D

    Most ideal heatsink temp

    I will try that, didn't know. It seems to be accurate though, I can touch the sink with my lips without having the urge to take em off :grin:
  3. D

    Most ideal heatsink temp

    Thanks for all those replies. If I measure the base of the heatsink (thick aluminium where the cob is attached) I measure the given temps. If I measure in the middle of the fins the temp is a little higher. I was just curious about ideal heatsink temp for cobs in our purpose. The whole light...
  4. D

    Most ideal heatsink temp

    Ambient temp while measuring was 23 degrees.
  5. D

    Most ideal heatsink temp

    Anyone? Temperature I am reading is 35 degrees of heatsink after 1 hour of operation. Driven at 1.7a with a lens covering the cob, fan I'm using is around 23cfm. I have tested it with a 30cfm fan, temperature was slightly lower at 33 degrees but the noise of that fan was too loud. Is 35...
  6. D

    Most ideal heatsink temp

    Hello, I run a vero 29 at 1.7a on a test heatsink/fan combo. I am reading temps with a laser gun, but what is the most ideal heatsink temperature range for cobs? Thanks
  7. D

    Optic Lighting Vero COBs updated

    Does someone know where this 'x3' lenses can be found?
  8. D

    Reflectors Vero 29

    Thanks for explaining! Well, then I need 16 wires instead of 4 :p
  9. D

    Reflectors Vero 29

    Why does each vero has different voltage? And arent the differences very very small between the cobs?
  10. D

    Reflectors Vero 29

    Maybe the wrong place to ask this question but since it was my own thread I'll just post it here :p Is it possible to wire 4 of the lpc-60-1400 drivers in parallel? When in parallel the voltage out remains the same but amperage will be 4x1.4a=5.6a. When I wire 4 vero 29 in parallel aswell, they...
  11. D

    Reflectors Vero 29

    Im in the Netherlands and parts for cobs arent that available. I ordered the vero's at digikey and had to pay 100€ tax, so I decided i just run 16 lpc-60-1400 which i could get in the EU. Made a nice driver board for it and will be hung outside the tent. I know there are a lot of wires now but...
  12. D

    Reflectors Vero 29

    Thanks! So with the 73degree ledil reflector I'll be fine, it doesn't have to be that perfect. Ledil is actually the only manufacturer who builds reflectors that fit in the bars, all others are large/strange dimensions.
  13. D

    Reflectors Vero 29

    Thanks for the advice, but I already have the drivers and everything else to build the light bars.
  14. D

    Reflectors Vero 29

    Hello, I am building 4 led bars with on each bar 4x vero 29 3000k driven at 1.4a. The bars are 120cm long to place each cob so that the light intensity is the same everywhere. This all wil be placed in a 5x5 tent. This would be 32w sq/f. Initially I didn't want to mount reflectors but after a...
  15. D

    ...All Things Vero...

    I see everybody uses 3000k, but I see a lot of stretch. Compared with hps, is the stretch more or less? Im sorry if this is the wrong place to ask, didn't know where else.
Top