Trimmer

Heres what came to mind.:dunce:

Lets hear some feed back.:cuss:

Link to bit.:mrgreen:
Irwin 1/2 x 12 Installer Bit [HN-38908] - $11.95 : Seven Corners Hardware, The finest quality tools, accessories, and hardware at the lowest prices

3in pipe, pink=reduction fitting or something like that(need holes for trim to go though), yellow=bearing(we have a big bearing shop close by), blue=cutting bit.

Metal pipe would be nice, but maybe the first one in PVC ??:confused:

Cutting platform, maybe lexan ??:confused:

Vac connects to bearing side, power with 1/2 drill ??:confused:


Second bearing on the motor side ??
 

Attachments

  • IMG_2327.jpg
    IMG_2327.jpg
    28.7 KB · Views: 175
  • IMG_2329.jpg
    IMG_2329.jpg
    27.2 KB · Views: 110
Last edited:
I don't have any experience with trimmers but I think I get the concept. If your trouble is how to secure the bearing, why not just mate the outer ring to the inner diameter of the pipe and the inner ring to the drill bit with an epoxy like JB Weld. I've seen people hold together engine blocks with this stuff - it's stronger than many types of steel. You could pick up the JB Weld and bearings at your local auto parts store. So basically you would have the outer bearing race fixed in the PVC pipe and the inner ring fixed to the drill bit and the two inner parts could spin inside the outer parts. Here's a very rough sketch.
 

Attachments

  • DSCF0857.JPG
    DSCF0857.JPG
    110.9 KB · Views: 151
How would one of those tiny handheld and battery powered hedge groomers work? I think black and decker makes a rechargable one.... I'm not talking the big clipper that has the long trim bar that has 20 blade sets on it that you use to shape hedges around you home......I'm talking a tiny baseball sized one that has maybe 2 blades on it....Would something like that work??
 
mared juwan said:
I don't have any experience with trimmers but I think I get the concept. If your trouble is how to secure the bearing, why not just mate the outer ring to the inner diameter of the pipe and the inner ring to the drill bit with an epoxy like JB Weld. I've seen people hold together engine blocks with this stuff - it's stronger than many types of steel. You could pick up the JB Weld and bearings at your local auto parts store. So basically you would have the outer bearing race fixed in the PVC pipe and the inner ring fixed to the drill bit and the two inner parts could spin inside the outer parts. Here's a very rough sketch.
Click to expand...
That sure would be a easy way to mount the bearings, but we need to exacuate the cuttings to the vac bag, the hose dosn't have to mount to the end I'm going to look around, I'll get the bit and bearings today.
 
outlawcustombikes said:
How would one of those tiny handheld and battery powered hedge groomers work? I think black and decker makes a rechargable one.... I'm not talking the big clipper that has the long trim bar that has 20 blade sets on it that you use to shape hedges around you home......I'm talking a tiny baseball sized one that has maybe 2 blades on it....Would something like that work??
Click to expand...
Never seen one, can you post a link ??

THX, Outlaw
 
I finially found one I was talking about! Seems quick and simple, easy to use as long as you keep your fingers behind it! lol I think I may get one! CLICK on the picture for the info!

Black & Decker #GS500 3.6V Cordless Grass Shear - SHOP.COM

Black & Decker #GS500 3.6V Cordless Grass Shear

Item


From $37.91

Price Promise
icn_info.gif
Our Price Promise
We guarantee that the prices on SHOP.COM are the same as those shown on the OneCart® stores' own sites.


Rechargeable 3.6 Volt NiCd Battery for Cordless Convenience. Precision Ground Hardened Shear Blade Stays Sharp Longer Controlled Trimming so Clippings Stay Where They Were Cut Optional Upright Extension Handle (Model #GSH500) Allows Use Without Bending Over Uses Replacement Blade Model #RB-001 3.6V Cordless Grass Shear, Rechargeable 3.6V Battery, 5,500 Cuts Per Minute, Lock Off Switch Prevents Accidental Start-Up.

  • Manufacturer: BLACK & DECKER
  • Model number: GS500
  • UPC Code: 028872305009
  • Length: 11
  • Width: 3.25
  • Height: 4.83
 
Still a little big but thanks a lot, Outlaw, REP+ for the effort.

Now that I think about it, it could be made to work.
 
Couldn't get the bearings in the same size O.D., but I'll deal .

$20 for the bit(9/16X18in.), another $30 for the JB Weld and bearings.

The bit is Irwin very good quality (they make Vise Grips)

The motor side bearing is a perfect fit, the tip side has a tiny bit of slop, maybe two thicknesses of paper all around.

I was thinking of using MarineTec, but I'm going with JB Weld.
 

Attachments

  • IMG_2343.jpg
    IMG_2343.jpg
    47.4 KB · Views: 69
Yeah, that JB Weld is good because it withstands high heat and has good resistance to sheer force. It sure does stink though. I think I could be more help if I knew more about the trimming concept. I've never trimmed a plant manually, much less with a power trimmer. Let me see if I get the idea. A branch, bud and leaves and all, is put in the PVC pipe and the drill tears the bud from the trim. Then the trim is vacuumed out. Do I have the right idea? It hard to see from the product pictures of those trimmers exactly how they operate. I like Irwin tools, too.
 
Been playing around, making a mock-up, using hot glue for now, I can peel it off if I want to change something.

The trim can't go past the front bearing, so I'm going to put a Y-fitting then another piece of pipe to hold the rear bearing.

Mared, the idea is, cut off a branch, big nugs. Rub lightly over slot, vac pulls in smaller leaves and the bit cuts them off,the bud won't fit though the slot but the leafage will, I'll whack the fans off by hand.

Trimming SUCKS, I love to do everything BUT THAT.
 

Attachments

  • IMG_2357.jpg
    IMG_2357.jpg
    41.6 KB · Views: 59
  • IMG_2356.jpg
    IMG_2356.jpg
    46.8 KB · Views: 73
  • IMG_2355.jpg
    IMG_2355.jpg
    31.5 KB · Views: 77
  • IMG_2354.jpg
    IMG_2354.jpg
    38.9 KB · Views: 92
  • IMG_2363.jpg
    IMG_2363.jpg
    25.9 KB · Views: 69
  • IMG_2361.jpg
    IMG_2361.jpg
    29.5 KB · Views: 109
  • IMG_2359.jpg
    IMG_2359.jpg
    38.3 KB · Views: 64
  • IMG_2358.jpg
    IMG_2358.jpg
    38.4 KB · Views: 49
mared juwan said:
Yeah, that JB Weld is good because it withstands high heat and has good resistance to sheer force. It sure does stink though. I think I could be more help if I knew more about the trimming concept. I've never trimmed a plant manually, much less with a power trimmer. Let me see if I get the idea. A branch, bud and leaves and all, is put in the PVC pipe and the drill tears the bud from the trim. Then the trim is vacuumed out. Do I have the right idea? It hard to see from the product pictures of those trimmers exactly how they operate. I like Irwin tools, too.
Click to expand...
Spent 3 years laying-up fiberglass boats, going to smell good.
 
TetraHyC said:
Been playing around, making a mock-up, using hot glue for now, I can peel it off if I want to change something.

The trim can't go past the front bearing, so I'm going to put a Y-fitting then another piece of pipe to hold the rear bearing.

Mared, the idea is, cut off a branch, big nugs. Rub lightly over slot, vac pulls in smaller leaves and the bit cuts them off,the bud won't fit though the slot but the leafage will, I'll whack the fans off by hand.

Trimming SUCKS, I love to do everything BUT THAT.
Click to expand...

Ohhhhhh. I get it now. As long as everything is sealed tight except the one end and the slot, it ought to work. You're just planning on pulling the vacuum through the hole in the bearing opposite the drill side? That should work even with the bit spinning in there. I'm interested to see the results.
 
Last edited:
Not to pretty, but I don't want to cut off the excess glue till I disassemble it.

Tried hooking the vac(12amp) to the Y works very well, lots of suction at the slot, a small vac will work nicely I think.

Spun it with my 1/2 drill, spins good.

I want to get a couple of clamps for it tomorrow, make a mount.

This is a shake-down version.

Another idea, laminate an eraser shield to the bit side of the lexan(epoxy and the seal-a-meal). I'd like a spring steel slot.

I make small carbon fiber and fiberglass parts for my toys that way.
 

Attachments

  • IMG_2369.jpg
    IMG_2369.jpg
    27.7 KB · Views: 59
  • IMG_2370.jpg
    IMG_2370.jpg
    42.9 KB · Views: 61
  • IMG_2371.jpg
    IMG_2371.jpg
    30.1 KB · Views: 55
  • IMG_2372.jpg
    IMG_2372.jpg
    44.1 KB · Views: 69
  • IMG_2373.jpg
    IMG_2373.jpg
    56.8 KB · Views: 50
  • IMG_2378.jpg
    IMG_2378.jpg
    38.9 KB · Views: 56
  • IMG_1493.jpg
    IMG_1493.jpg
    39 KB · Views: 87
This thing WORKS !!

Vac is too strong, its a full size upright.

I'll try to make a movie, I couldn't post the last movie I made(it was from my camera) I don't know why.
 
You must log in or register to reply here.

Similar threads

S
Concoction of problems. Experienced grower struggling for the first time.
Replies
13
Views
1K
strangerdanger7000
S
Nuikala
White Widow and The Church seedling problems, pls help.
Replies
2
Views
753
Nuikala
Nuikala
||||||l||||||l||||||
DIY Hydroponics Bottle Garden (reprinted article)
Replies
3
Views
2K
daillman
daillman
Brett Brown
All About Lighting
Replies
0
Views
2K
Brett Brown
Brett Brown
SxIstew
Nutrient and Pest prolem solver WITH Pictorial
Replies
15
Views
7K
cannabis love
cannabis love
Back
Top