2 x 320W XL QB V2 R SPEC KIT vs the new 650R

PadawanWarrior

Well-Known Member
16 qb 132 and 2 HLG-480H-C1750 would be my choice. That would cost like 540+250=$790. With the frame and wagos I think it would be less than $850.
I like that idea. It would actually just be $498 for me to get 16 shipped to me after the RIU10 code, so even cheaper.

The spread would kick ass. No red, but I still really like this idea.
 

andymex

Well-Known Member
I like that idea. It would actually just be $498 for me to get 16 shipped to me after the RIU10 code, so even cheaper.

The spread would kick ass. No red, but I still really like this idea.
You could buy the 4000k and add red according to this guide.
88.5 watts of 4000k + 11.5 watts of deep red gives you the same spectrum than the 650 R check it ;)
 

PadawanWarrior

Well-Known Member
You could buy the 4000k and add red according to this guide.
88.5 watts of 4000k + 11.5 watts of deep red gives you the same spectrum than the 650 R check it ;)
They're outta the 4K right now.
 

JSB99

Well-Known Member
For 16 qb 120 I would use 2 HLG-480H-C2100a and connect 8 in series in each.
Y'all confused me right up again LOL! Okay, should I get 16 of the 120s, or the 132s?

Also, shouldn't I get the HLG-480H-C2100B which is the dimmable?
 

andymex

Well-Known Member
Y'all confused me right up again LOL! Okay, should I get 16 of the 120s, or the 132s?

Also, shouldn't I get the HLG-480H-C2100B which is the dimmable?
Actually the a series has already a potentiometer. The series B you should add one. Buy the qb132 if you only buy that. If you want to match the spectrum of the 660R buy qb120 4000k and add 660 nm red at the rate of 88.5 watts of 4000k + 11.5 watts of 660nm. The second solution is more expensive but you get the best coverage and the best spectrum. When you decide on the boards let me know and I will help you chose a driver.
 

andymex

Well-Known Member
Y'all confused me right up again LOL! Okay, should I get 16 of the 120s, or the 132s?

Also, shouldn't I get the HLG-480H-C2100B which is the dimmable?
And acutually the reason I recommend the a series is that it can be run up to 20% higher. In the qb 120 case that would be useful, for the the qb132 you can buy a or b.
 

JSB99

Well-Known Member
Actually the a series has already a potentiometer. The series B you should add one. Buy the qb132 if you only buy that. If you want to match the spectrum of the 660R buy qb120 4000k and add 660 nm red at the rate of 88.5 watts of 4000k + 11.5 watts of 660nm. The second solution is more expensive but you get the best coverage and the best spectrum. When you decide on the boards let me know and I will help you chose a driver.
Just because I don't have the time to tinker as much, I'm going with the 132s, to make the build easier.

I'm going with 16 x QB132s, and a pair of HLG-480H-C2100A from Meanwell. Sound about right? Besides the frame stuff, is there really anything else? I guess I can pick up some molex connectors, unless they come with enough.
 

andymex

Well-Known Member
Just because I don't have the time to tinker as much, I'm going with the 132s, to make the build easier.

I'm going with 16 x QB132s, and a pair of HLG-480H-C2100A from Meanwell. Sound about right? Besides the frame stuff, is there really anything else? I guess I can pick up some molex connectors, unless they come with enough.
Everything is right except the drivers.
 

andymex

Well-Known Member
Just because I don't have the time to tinker as much, I'm going with the 132s, to make the build easier.

I'm going with 16 x QB132s, and a pair of HLG-480H-C2100A from Meanwell. Sound about right? Besides the frame stuff, is there really anything else? I guess I can pick up some molex connectors, unless they come with enough.
Buy some wagos and some wire.
 

andymex

Well-Known Member
Just because I don't have the time to tinker as much, I'm going with the 132s, to make the build easier.

I'm going with 16 x QB132s, and a pair of HLG-480H-C2100A from Meanwell. Sound about right? Besides the frame stuff, is there really anything else? I guess I can pick up some molex connectors, unless they come with enough.
The drivers you should use are HLG-480H-C1750
 
Top