Yodaweed
Well-Known Member
Cool white used in the RW series: XTEAWT-00-0000-000000H50 R5, Warm White used in the XGS: XTEAWT-02-0000-00000BFF6, Red LED used in the RW
and SGS Series: XPeReD-L1-0000-00801 P3.
Gavita lights
- Thread starter sgrowdum
- Start date
and SGS Series: XPeReD-L1-0000-00801 P3.
Stephenj37826
Well-Known Member
There is no helping you. This numbers are derived from a certain wattage per led.
If you run the xte at higher wattage than what is shown as test wattage it will have lower lm/w. If you run cxb3590 at lower wattage than the test wattage it will have higher lm/w. I'm not going any farther with this shit. If you don't like LED go to the hid section of this forum and wear it out. You say you run those leds but give no details. I mean really I can straight up run an hps in a cool tube horizontal with no reflector and it would look bad... just telling us you use cxa2590 and some mono gives us no idea.
Yodaweed
Well-Known Member
I'm on a thread titled "Gavita Lights" maybe you need to go away from this thread and stop giving bad information out, you don't know what you are talking about and you are just trying to sell your product, I got no bone in this fight, i'm just telling the truth and although you don't like it because it hurts your bottom line , it's still the truth. Now stop trying to spew garbage lies about how COBs are better than HPS because they are not.
DankaDank
Well-Known Member
You really have no idea what you're talking about !
Yodaweed
Well-Known Member
And you do of course , gotta love the people that been growing a few months that are suddenly master growers and all knowing about everything.
sixstring2112
Well-Known Member
I dont think you understand how t5 uv lamps work.you could hang one 4ft t5 on the ceiling and have 5x as much uv in the room than a room full of mh lamps lol.mh has very little and would be run the whole cycle.where as just a few hours per day with the t5 would provide much more uv to your plants.
Put one on each wall and a few on the ceiling if your that into uv.but then tell all those gavita users their lights suck because they also lack any substantial uv lol.
Mars led panels have uv and ir built in,are we to assume these would be the best possible lighting for Marijuana?
Ps,i used a mars 1600 and got rave reviews on the smoke from it,running multiple strains under it before it took a shit.just sayin
Yodaweed
Well-Known Member
Yeah I used two blackstar crap bluple lights for years and got good buds from it, doesn't mean I couldn't have gotten better under a HPS. And you do realize you can get DE MH lights right? I have enclosed a link to a picture you should view.I dont think you understand how t5 uv lamps work.you could hang one 4ft t5 on the ceiling and have 5x as much uv in the room than a room full of mh lamps lol.mh has very little and would be run the whole cycle.where as just a few hours per day with the t5 would provide much more uv to your plants.
Put one on each wall and a few on the ceiling if your that into uv.but then tell all those gavita users their lights suck because they also lack any substantial uv lol.
Mars led panels have uv and ir built in,are we to assume these would be the best possible lighting for Marijuana?
Ps,i used a mars 1600 and got rave reviews on the smoke from it,running multiple strains under it before it took a shit.just sayin
https://www.instagram.com/p/BJy9tpAAm2V/?taken-by=jungleboyz
Oh and just a FYI , T5's are linear lights , they lose intensity VERY quickly, hanging them on the ceiling most likely will only accomplish raising your electric bill because the light would be so weak by the time it reached the plants it would be nearly useless.
sixstring2112
Well-Known Member
I follow jungleboyz on ig as well lol,you really shouldn't reference him in all your led arguments bud.your de metal halide does not have the same output as 1 decent t5uv lamp will.your basically telling me the plant needs so little uv we could get it from a flashlight lol.
Enhanced blue just means less red and orange,not necessarily uv
Yodaweed
Well-Known Member
Yeah those T5's make a lot of UV(too much if you ask me), but they don't make any other light, enhanced blue pushes chlorophyll production. I radiate my LED grow room with 18% UV-B light 15 minutes per hour starting half way through the grow cycle and lasting 6 hours.
sixstring2112
Well-Known Member
Oooooomoles,had to get that off my chest
Slow clap for Juan Pablo. He has finally figured out the obvious. I don't know shit. I made that very clear in my first post. We get it you like LED but you havent posted a single shred of useful data. So please STFU
Yodaweed
Well-Known Member
Don't mind him, he's here because he has no where else to go, I think he might live in a van down by the river.
Yodaweed
Well-Known Member
You want to build it yourself?
JorgeGonzales
Well-Known Member
Nice to see you trolling by playing dumb. It's what this thread deserves.
Yeah if I'm going to incorporate them in I think that's the best route. I was going to use them as side lighting and maybe the edges of the 3X6 trays with a few sprinkles in along side of the HID fixture.
Yodaweed
Well-Known Member
http://www.tastyled.com/product-p/t4-2100.htm
335 watts, 670$ plus shipping, you would need 3-4 of those to cover an equal area to a 1000w HPS. so between 2010$-2680$ not including shipping.
335 watts, 670$ plus shipping, you would need 3-4 of those to cover an equal area to a 1000w HPS. so between 2010$-2680$ not including shipping.
Yodaweed
Well-Known Member
You can probably build a similar fixture for 1500$ is my guess maybe a bit more.
Yodaweed
Well-Known Member
https://cobkits.com/product-category/cob-chips/cree/
you need a driver, cob, frame ,heat sinks,cpu heatsink paste, wires, holders , and reflectors if you want those or run cobs bare but need to be closer and will restrict the footprint.
you need a driver, cob, frame ,heat sinks,cpu heatsink paste, wires, holders , and reflectors if you want those or run cobs bare but need to be closer and will restrict the footprint.