REALSTYLES
Well-Known Member
This is what it looks like with all the holes drilled
![SAM_0320.JPG](/data/attachments/2473/2473543-0c12dc824f66ae43d79dda0f55a1e4e2.jpg)
What I did was I first drilled out my holes for the holders,I used a 1/8" drill bit after that I marked where the fins were between fin 2 and 3 and used the 5/16" drill bit to drill out the holes for my eye bolts and then an inch from that hole I used the 5/32" drill bit the the hole I run the wire through.![SAM_0326.JPG](/data/attachments/2473/2473550-512f1f9ce9e5ed0a6b7156864f0f73b7.jpg)
![SAM_0320.JPG](/data/attachments/2473/2473543-0c12dc824f66ae43d79dda0f55a1e4e2.jpg)
What I did was I first drilled out my holes for the holders,I used a 1/8" drill bit after that I marked where the fins were between fin 2 and 3 and used the 5/16" drill bit to drill out the holes for my eye bolts and then an inch from that hole I used the 5/32" drill bit the the hole I run the wire through.
![SAM_0326.JPG](/data/attachments/2473/2473550-512f1f9ce9e5ed0a6b7156864f0f73b7.jpg)