HBBum Going Hydro - F*cking Incredible OG

lights out pics, 15 days in:

20141112_094120_zpsmhcyg1f9.jpg

20141112_094125_zps1sdie1cn.jpg

20141112_094100_zps1ppgbunb.jpg

20141112_094150_zpsjkguheto.jpg
 
Thanks Missy!

It's been a learning curve, but fun. Not LED, running a 600W HPS. After these 2 are done, I have put together an ebb and flow to give it a go running 6 smaller plants to see how that helps my veg times.
Very cool!! I thought I saw purple lights in the first page or two :dunce:
Most impressive so far :mrgreen:
 
Oh yeah, I have a little 90w LED I usually use for the first week or so when I put in clones until their roots build out some. I don't know if it actually helps, but I still do it :)

Loving your new space as well, I have been lurking :weed:
 
Rez swap

Ran 10 gallons on ph adjusted tap, ppm after rinse was near the starting tap. New batch of nutes in RO water.

G- 20ml
M- 40ml
B- 50ml
F+- 5ml
KB- 15ml
C/M- 10ml
SZ+- 5ml

PPM- 874
PH- 5.8
 
Again, thanks for the comments on my post. Your growth is insane - I am more excited than ever to switch to hydro. I like your scrog setup too and want to try and replicate it what you are using for material - I'm not sure if I missed it (kinda been bouncing around the thread but what size tent are you working with? Looks like you are using a gorilla grow, like me - a 4x4x8h.

Also, since you are using 5 gal buckets, check out this aerator - fits a 5 gal bucket , I have one and use it for tea but it would work great for aerating the crap out of the res.

Worm Tea - Compost Tea Aerator (K 4)
http://www.amazon.com/gp/product/B00CF0F3UU
415TFr9m-CL.jpg
 
The tent is 2x4x7. My res is an important 18g tote. I like the design of that thing, I bet I could make something like that. The Scroggins is just pvc, I used round phone wire, but will be swapping that with some sort of nylon cord.
 
The tent is 2x4x7. My res is an important 18g tote. I like the design of that thing, I bet I could make something like that. The Scroggins is just pvc, I used round phone wire, but will be swapping that with some sort of nylon cord.

You could, it just a 3/4 tubing connected to a 3/4 drip hose just run it under a frame to hold it to the bottom. It makes a ton of real tiny bubbles.
 
PPM down to 700, they are chugging the water pretty good too. I added 4G RO water with 1350PPM nutes to bring my res to 1000PPM and PH 5.8

Nutrients:
G- 20ml
M- 40ml
B- 60ml
F+- 5ml
LKB- 20ml
C/M- 10ml
 
For what is supposed to be a 100% indica strain, the stretch has been a lot more than expected. They are about 3X their size before flip and I only have about 6" more headroom so I am hoping they are done for now.

Going through about a gallon/day per plant. PPM stays consistent when I feed to 1000PPM as does the PH so I think that's about the right level for these girls at this stage.

Got a tad bit of light bleaching on a couple leaves that got within 6" of the cooltube.

20141115_212400_zps4p7bgraz.jpg

20141115_212414_zpsjg7mzw7q.jpg
 
Thanks!

I am totally maxed on headroom now, which shocked the hell out of me since I was not expecting what is supposed to be a 100% indica to shoot from 8-36" after the flip. Should be done though, 21 days from flip.


added 5 gallons of RO with:

Nutrients:
G- 20ml
M- 40ml
B- 60ml
F+- 5ml
LKB- 15ml
C/M- 10ml
SZ+- 1ml

PPM 1100
PH 5.7
 
Thanks, have 8 babies of this that unfortunately(?) are ready to get pulled out of the aero cloner. I had no idea how fast this little cloner would root out the clones. The little 1 gallon cloner may be completely full of roots in another week.

I have been prepping a flood and drain table so I could do a few smaller plants, but the way it is going I will need to put the clones in it about 4 weeks before I can harvest these 2 girls.. Oh what a horrible problem :)
 
Thanks, have 8 babies of this that unfortunately(?) are ready to get pulled out of the aero cloner. I had no idea how fast this little cloner would root out the clones. The little 1 gallon cloner may be completely full of roots in another week.

I have been prepping a flood and drain table so I could do a few smaller plants, but the way it is going I will need to put the clones in it about 4 weeks before I can harvest these 2 girls.. Oh what a horrible problem :)
I want that problem in my life
 
cuttings are just straight up in veg since the bucket is pretty full of roots:

20141122_170746_zpssshgl4du.jpg


Early next week I will have a little splace to put 6 of these in a little flood and drain table under a 90w LED and a couple 23w CFL, hoping for not much growth since I probably have 4-5 weeks left on the moms

20141119_212652_zpszt1wi0vo.jpg


20141119_212643_zpsyzoslo7v.jpg
 
Back
Top