You should check out his 'new' products. Lol.
ICE WAX (bubble hash) with Matt Rize
- Thread starter Matt Rize
- Start date
Matt Rize
Hashmaster
fastest possible is best.
Juicy Jeff it's all how you look at it. Bad material is never good to start with, but it's really only 'bad' in terms of yield. For instance, using my dry sift method, you can make this
From this in about 15 seconds. Shade plant, hardly watered last year, barely any frost or love.
From this in about 15 seconds. Shade plant, hardly watered last year, barely any frost or love.
Frenchy Cannoli
Well-Known Member
Bad material is never good to start with, but it's really only 'bad' in terms of yield
This is far from reality my friend, it is not about the yield or even its cleanliness but all about resin quality and % of terpenes.
Bad material = low resin quality most of the time. You are all too much into the look when it is all about taste and smell
This is far from reality my friend, it is not about the yield or even its cleanliness but all about resin quality and % of terpenes.
Bad material = low resin quality most of the time. You are all too much into the look when it is all about taste and smell
So I should just not make products unless I have top notch materials? The strain was very fragrant and such, just not well taken care of. It was an outdoor shade plant left for dead kinda. Doesn't change the fact the method works on just about anything, even garbage like that.
Would it be better if I had top notch materials to be working with? Of course. But that's not really the point.
I have seen many people use bad trim in water bags and it didn't turn out worthwhile at all. Very green and after beating it up in the ice.. just.. not really all that melty due to contaminant. I'd much rather sift bad looking material like that than water bag it, but that's just preference.
By anyones standards that trim is ugly, but people generally say you can't make high quality products unless you have amazing starting material (i.e. super frosty) but that's just not true.
Obviously i'd prefer to be running super fire but that wasn't the intention of my wording when I said "bad". Sorry for the confusion. That said, i'd still rather puff on this than 99% of bho out there heh.
Cheers.
Would it be better if I had top notch materials to be working with? Of course. But that's not really the point.
I have seen many people use bad trim in water bags and it didn't turn out worthwhile at all. Very green and after beating it up in the ice.. just.. not really all that melty due to contaminant. I'd much rather sift bad looking material like that than water bag it, but that's just preference.
By anyones standards that trim is ugly, but people generally say you can't make high quality products unless you have amazing starting material (i.e. super frosty) but that's just not true.
Obviously i'd prefer to be running super fire but that wasn't the intention of my wording when I said "bad". Sorry for the confusion. That said, i'd still rather puff on this than 99% of bho out there heh.
Cheers.
tobinates559
Well-Known Member
so frenchy a have a bunch of weed that was grown/harvested/dried, very badly i can hardly smoke it, but i have alot...so my question is even if agitate very lightly and do everything right while making it into bubble will it just be terrible hash?? will it be worth my effort?? i feel it it could come out smokeable where as the buds are not
Frenchy Cannoli
Well-Known Member
Impossible to say without trying, your chances of getting high quality are very low but you may get something good enough to smoke or make edibles.
You didn't ask me but i'd say yes. Obviously the quality of the resin is important, but if it's all you got, there are ways of turning it into very nice product that is more enjoyable than what you've currently got.
tobinates559
Well-Known Member
thanks guys that give me some hope!!!! ill post my results here, give me a week or two
trichmasta
Active Member
Thanks to Matt and his tech, this thread my ice wax game is purdy on point!! Just got back my test results on my Jesus OG and it tested at 71%!!!! blew my mind when the flowers only came in at 19.5. Blessed beyond belief to share this magic with the patients!!
Bless up!
Bless up!
trichmasta
Active Member
Is anyone using Nikka's Essential Bags 2.0?? In the market for a new set and would love to support a fellow Extract Artists innovations....
Kalyx
Active Member
Nice trich, good to see ya here still. I got real busy with life, gardens, movin.
Great #s! Im sure that og IWE is real melty and top notch! I have the original essential bags and can comment that mine are great and going strong after years of full melt extraction… Flo 70 micron. Would love to get this tested after I make more, freezers full of fresh trims… stay cool and patient everybody, summers upon us!
Great #s! Im sure that og IWE is real melty and top notch! I have the original essential bags and can comment that mine are great and going strong after years of full melt extraction… Flo 70 micron. Would love to get this tested after I make more, freezers full of fresh trims… stay cool and patient everybody, summers upon us!
trichmasta
Active Member
Kalyx what up ice water grow homie!!?? Thanks for the positive feedback...after 2 years my Xtraktor bags are ready to be replaced that's for sure; even heard Matt post in this thread that yield and sieve quality is poor with these....
Growing the best, cleanest flowers to make the most potent flavorful extracts is #1 in my hood always!!
Looks like some fire you got there as well dude!!!
Growing the best, cleanest flowers to make the most potent flavorful extracts is #1 in my hood always!!
Looks like some fire you got there as well dude!!!
trichmasta
Active Member
Yup! I couldn't believe it either...Fresh Frozen Jesus OG sugar trim, 5 gal wash machine, filtered water and ice cubes, microplaned after 24 hours, and bamm!! .44 CBD too! Pure melty terp-rich goodness!!!
Matt Rize
Hashmaster
Drain when agitation is finished. No need to prolong exposure time to water.
Matt Rize
Hashmaster
^^^^ love this guy.
Hey Matt. Thank you for this awesome guide. I'm still new to bubble hash and will be doing my first run soon.
I apologize if any of this is repeated information. I did spend the past week reading through and gathering as much information as possible. However, there are still some areas I'm unsure of and I would greatly appreciate any input.
Is there a big difference in final product based off the water you use? Was thinking of using tap water unless it ruins anything during the process.
Unfortunately I'm limited to dried buds. Would it still help if I froze them?
During agitation should I aim for a slow and long agitation or a slightly fast and short agitation as a first timer? Is there any difference in using a wooden or silver spoon?
I have a 220, 160, 120, 73, and 25 micron bag. I'm only using 28ish g on my first run, should I be using both the 160 and 120 bags?
How long do you cure your hash for?
I don't have a microscope or anything to really take a look at the trich on the bud. But since I'm using buds instead of trim, would you recommend doing a second run?
Once again, I apologize for reasking questions and really appreciate any input you can give. Your hash looks amazing btw
Friend showed me some pics and there I went reading up on how to make it heh.
I apologize if any of this is repeated information. I did spend the past week reading through and gathering as much information as possible. However, there are still some areas I'm unsure of and I would greatly appreciate any input.
Is there a big difference in final product based off the water you use? Was thinking of using tap water unless it ruins anything during the process.
Unfortunately I'm limited to dried buds. Would it still help if I froze them?
During agitation should I aim for a slow and long agitation or a slightly fast and short agitation as a first timer? Is there any difference in using a wooden or silver spoon?
I have a 220, 160, 120, 73, and 25 micron bag. I'm only using 28ish g on my first run, should I be using both the 160 and 120 bags?
How long do you cure your hash for?
I don't have a microscope or anything to really take a look at the trich on the bud. But since I'm using buds instead of trim, would you recommend doing a second run?
Once again, I apologize for reasking questions and really appreciate any input you can give. Your hash looks amazing btw
Friend showed me some pics and there I went reading up on how to make it heh.