Whats quickest way to make hash ..?

Wow. You truly are a moron.

LOL

Gquebed said:

Bottom line....

I would rather suffer a higher percentage of contamination in my hash than give up over 30-40% of yield chasing a 20% higher purity.

It is such a waste...particularly when NOBODY can taste the difference in that purity.

Click to expand...

Actually all you gotta do Is go on analytical 360 and look up test results in dry ice hash and then flower rosin you will see the best dry ice hash tested at 32% total cannabinoid s the two rosins tested were both in high 70s. I gotta agree dry ice is a very dirty low end extract.

lio lacidem said:

Actually all you gotta do Is go on analytical 360 and look up test results in dry ice hash and then flower rosin you will see the best dry ice hash tested at 32% total cannabinoid s the two rosins tested were both in high 70s. I gotta agree dry ice is a very dirty low end extract.

Click to expand...

Like i said... i have not argued that rosin is not purer. Read my posts. My argument is that rosin wastes a lot and is far feom being pure. And the taste difference in purity between the two is not large enough for ANY HUMAN to discern. Fact. In a blind taste test you would not know which is which.

Your nuts you would taste plant matter and chlorophyl in the dry ice and terps and flavor in the rosin. Also it is a big difference between 30% and 70% thats like comparing great flower to a good. Concentrate you would definately know the difference.

Also im not yet sold on being able to use rosin in commercial terms so I am looking for flaws in the rosin tek but your arguement is incorrect.

lio lacidem said:

Your nuts you would taste plant matter and chlorophyl in the dry ice and terps and flavor in the rosin. Also it is a big difference between 30% and 70% thats like comparing great flower to a good. Concentrate you would definately know the difference.

Click to expand...

Hahahahahahhaah.... 30% to 70% is a canabinoid measurement ....not a purity...meaning plant matter etc.... nobody here even knows the difference...

Cannbinoid content is not a measurement of purity...it is a measurement of cannabinoid...

I made rosin last night from a 4 month cured 45u ice wax. Made just a few dabs as a test. You may lose yield. 2 dabs and I was high for hours. I have a very high tolerance. You really don't need that much. It tastes so much better than the ice wax.

rosin is commercially produced already. Its already in the dispensaries at $100 a gram.

people have even modified presses to make a bunch with one press.

Gquebed said:

Hahahahahahhaah.... 30% to 70% is a canabinoid measurement ....not a purity...meaning plant matter etc.... nobody here even knows the difference...

Cannbinoid content is not a measurement of purity...it is a measurement of cannabinoid...

Click to expand...

You Sir, are HILLARIOUS!

[QUOTE="hyroot, post: 11459136, member: 319672"I made rosin last night from a 4 month cured 45u ice wax. Made just a few dabs as a test. You may lose yield. 2 dabs and I was high for hours. I have a very high tolerance. You really don't need that much. It tastes so much better than the ice wax.

rosin is commercially produced already. Its already in the dispensaries at $100 a gram.

people have even modified presses to make a bunch with one press.[/QUOTE]
Havent seen it in any dispensaries ive been too but I admit I mostly make my own medicine. id like to see it available just a pain in ass to make a decent amount with only hair straightner. I value your hash opinion so whats your thoughts on contaminate in dry ice hash?

I have a couple jars full of dry ice kief, its quick and easy but VERY low grade when compared to other concentrates. Especially when done with a 220 bag like Gque shows in his dry ice thread.

lio lacidem said:

[QUOTE="hyroot, post: 11459136, member: 319672"I made rosin last night from a 4 month cured 45u ice wax. Made just a few dabs as a test. You may lose yield. 2 dabs and I was high for hours. I have a very high tolerance. You really don't need that much. It tastes so much better than the ice wax.

rosin is commercially produced already. Its already in the dispensaries at $100 a gram.

people have even modified presses to make a bunch with one press.
Havent seen it in any dispensaries ive been too but I admit I mostly make my own medicine. id like to see it available just a pain in ass to make a decent amount with only hair straightner. I value your hash opinion so whats your thoughts on contaminate in dry ice hash?

Click to expand...

dry ice hash is crap. Its full of visible plant material and the same micro plant material that ends up in the 25µ bubble bags.

If I were to make dry ice hash. I would also run it through dry sift screens to clean it. Sort of seems counterproductive to do the dry ice method at that point. Might as well do dry sift from the beginning.

I've made rosin with dry sift and microplaned bubble. They were both really good.

I dont understand how this thread got jacked to become one about rosin?

The op asked which is the quickest way to make hash. The only answer is dry ice. It is the quickest and easiest and the least messy. Period.

Ask anyone who has done both.

If rosin is so pure then it has no business being mentioned in this thread, which is about "hash."

this HTML class. Value is http://i.word.com/id

Gquebed said:

I dont understand how this thread got jacked to become one about rosin?

The op asked which is the quickest way to make hash. The only answer is dry ice. It is the quickest and easiest and the least messy. Period.

Ask anyone who has done both.

If rosin is so pure then it has no business being mentioned in this thread, which is about "hash."

this HTML class. Value is http://i.word.com/id

Click to expand...

technically dri ice kief isnt hash either, so that doesn't belong in this thread either by your standards. To actually make hash takes months. Hash takes 2 days of processing. A week of drying. A day of pressing and 2 months minimum of curing.

Technically ice wax isn't hash either. its not pressed.

Rosin aka solventless shatter. Takes about 10 minutes to make a gram from start to ready to smoke. so this thread is about extracts. at the top there is a pole

1. Butane blasting method
2. Kief tumbler
3. Bubble Bags
4. Morrocan bag and stick method
5. other ..see below

Anything made with dry trim.That trim should be cured for minimum of 3 month prior so the terpenes polymerize.

dry sift would probably be the fastest. You can get weight in minutes with that method

Stellate hairs in cannabis?

Rosin crap aside. Did you mean cystolithic hairs by chance?

Well carry on with yalls blabbering

The definition of hash is the collection of cannabis trichomes, no difference if its ruptured through pressing and heat or by solvent all is hash.
Unless you ask a certain frenchman
But that is the definition

Thank you sir! I am not making rosin...go to that threat. I just have a lb and want to know best way. I am going to ice drill...let it settle, at the end i will use a bounty roll (the quicker picker upper) and Wick it.up, im going to freeze fesh bud first ...then agitate......Im ok with plant material. I love flowers

charlestonchunk said:

Thank you sir! I am not making rosin...go to that threat. I just have a lb and want to know best way. I am going to ice drill...let it settle, at the end i will use a bounty roll (the quicker picker upper) and Wick it.up, im going to freeze fesh bud first ...then agitate......Im ok with plant material. I love flowers

Click to expand...

Definition of hash:
this HTML class. Value is https://www.google.c

Given that kief is never particulate free it is technically hash too, whether oressed of not.

And actually there is no set time for making hash. Some spend months doing it, like some Afghans and Indians. Others spend weeks, like most Morocans. If you use high pressure hydraulics you dont even need heat and can do it in hours. There is no standard. Many different methods. Kief is generally thought of as being loose powder. When it is pressed it is called hash. But as said, technically it is hash even in loose form.

Since rosin is pressed rather than extracted with chemical i guess it too qualifies as hash. Pardon me...

Frenchy Cannoli said:

It is not a question of speed, it is the wrong question, wrong attitude, wrong vision and has no future. Every producing countries in the world work fast to make quantity, do you really want to be part of the herd or and out for quality.

Click to expand...

I think he meant was the easiest the easiest I have come to the conclusion ice hash unless you want crazy paraphernalia all over your house

Gquebed said:

Definition of hash:
this HTML class. Value is https://www.google.c

Given that kief is never particulate free it is technically hash too, whether oressed of not.

And actually there is no set time for making hash. Some spend months doing it, like some Afghans and Indians. Others spend weeks, like most Morocans. If you use high pressure hydraulics you dont even need heat and can do it in hours. There is no standard. Many different methods. Kief is generally thought of as being loose powder. When it is pressed it is called hash. But as said, technically it is hash even in loose form.

Since rosin is pressed rather than extracted with chemical i guess it too qualifies as hash. Pardon me...

Click to expand...

I would love the gear /ambition/willingness to make it...its not a priority for me and I would fukitup my man..ice it is

qwizoking said:

Stellate hairs in cannabis?

Rosin crap aside. Did you mean cystolithic hairs by chance?

Well carry on with yalls blabbering

Click to expand...

Nope that's not what I meant but I just googled that and thank you for giving me a name to those. I've always been curious of their name and if they eventually developed into trichomes. I even asked bubbleman and never got a response.

I