Vert(600+400) 5 plant, from Ukraine with love

ttystikk said:

My setup did very well. I ran a fan pushing air straight up. It circulated through the cylinder, out the top and then back to the bottom. Roots were not cold. The top was not too hot.

I also had good cooling in my room. Since I'm not in your place, I can't say what is best for you. I'm just asking questions.

Click to expand...

.....

Everything is normal, My Friend! ...

but there is another important key moment: the fact is that there are fewer branches at the top, and more down at the bottom ..))) You will not fill the grid completely! Bro, I want an ideal installation, without unnecessary extra space, too!

the top flowers are huge, they are less light, the upper ones are small, they are more ......... ideal, Bro .. equilibrium .. idyll

Sedan said:

.....

Everything is normal, My Friend! ...

but there is another important key moment: the fact is that there are fewer branches at the top, and more down at the bottom ..))) You will not fill the grid completely! Bro, I want an ideal installation, without unnecessary extra space, too!

Click to expand...

I was able to train the plants to cover the entire cylinder. You may have smaller branches at the top due to the smaller lamp.

ttystikk said:

You may have smaller branches at the top due to the smaller lamp.

Click to expand...

above added ..

Sedan said:

above added ..

Click to expand...

You are working with extremely low light intensity. Even with two 1000W lamps in my cylinder, my watts per square foot value was only about 20, or 2000W for 8.92m². This is considered to be very low, others would use three times as much or even more!

I believe you will have better results near the top if you use a 600W lamp. I fear you are starving your plants for light.

Even now I'm using 900W of highly efficient COB LED light for 24ft², or 2.23m².

ttystikk said:

You are working with very low light intensity. Even with two 1000W lamps in my cylinder, my watts per square foot value was only about 20, or 2000W for 8.92m². This is considered to be very low, others would use three times as much or even more!

I believe you will have better results near the top if you use a 600W lamp. I fear you are starving your plants for light.

Even now I'm using 900W of highly efficient COB LED light for 24ft², or 2.23m².

Click to expand...

I can put 600 right now .. I have ... but ..)))) I'll let you disagree, colleague, by trial error, I came to this conclusion. Maybe I'm wrong, of course.)) Time will tell how we are told.))

firebird

We forgot that we are children, locking the soul in the body
We are sure that we must obey important uncles
Selling the soul in the clubs, breathing not weakly
We sleep and see dreams, how our mother caressed us

We do not need an answer, we need to cool down
Do not change our world useless running
And you're so close, our time is pouring
I need to forget myself or my heart breaks down

Stumbling, we lose sight and peace
Everyone will hide their smiles, but they will not say how it was
We can not hide, so that we can not see
It is not so easy to understand, but it's not insulting to us.

In the night, when all the stars light up on the fir-tree
I ask the dragon to be serious with me
In my little heart there is a big word
I want to live and become healthy again

I'm flying to heaven, embracing your neck
I see the planets, while the catheter in vienna
While I hear a voice while I see faces,
But the world leaves my firebird

Let me remind you, the temperature only day, as normalized, before this scaled for 35. So sorry for the рlant quality, the roots are toasted a little)). Large plants look worse, but I plan to transplant them today. And one more problem ... Elsa began to go pouring into pots. I still can not close the room at night, I have not yet brought the pipe out of the window. This morning I went in, and under Kush excavations .. Damn, it's insulting, the roots pounded the top. Well and gnaws them regularly. Thank God that auto does not touch .. surprisingly))

Bamdat Fem



Crazy Kush Fem



To be continued..........

Sedan said:

Let me remind you, the temperature only day, as normalized, before this scaled for 35. So sorry for the рlant quality, the roots are toasted a little)). Large plants look worse, but I plan to transplant them today. And one more problem ... Elsa began to go pouring into pots. I still can not close the room at night, I have not yet brought the pipe out of the window. This morning I went in, and under Kush excavations .. Damn, it's insulting, the roots pounded the top. Well and gnaws them regularly. Thank God that auto does not touch .. surprisingly))

Bamdat Fem

View attachment 4015091 View attachment 4015090

Crazy Kush Fem

View attachment 4015092 View attachment 4015093

To be continued..........

Click to expand...

The cat is digging in your soil and chewing on your plants?

That's a potential CATastrophe!

ttystikk said:

The cat is digging in your soil and chewing on your plants?

That's a potential CATastrophe!

Click to expand...

never beat Elsa, today I shagged her neck only ... offended))), huddled in a corner, the whole day did not go out)) the character of cats is very interesting))

Or you can use 4 QB304. With the right driver, I'd put it up against any SE 1000w HPS. At 363 watts from the wall, it will definitely exceed a 600 watt HPS. Cost me about $500 to build.

Plants got out of control, but the potential is quite obvious:

ANC said:

In stead of using 1000W HPS, one can use four 250W Bars with COBs in the center. In a north south west east formation.

Click to expand...

pop22 said:

Or you can use 4 QB304. With the right driver, I'd put it up against any SE 1000w HPS. At 363 watts from the wall, it will definitely exceed a 600 watt HPS. Cost me about $500 to build.

Plants got out of control, but the potential is quite obvious:


View attachment 4015859

Click to expand...

The distant one resembles Curly Sue, from the film of the same name)) ... a little less nitrogen is needed .. drench water рН 6.5 well several times, let it dry and feed, at the rate ...left plants are starving ..

Bro, show me please, how do you dispose of these lamps? I understand from above? And what about the lower branches that are hidden under thick foliage? I would advise you to cut off large leaves to give strength to small ones..With this arrangement of lighting, the lower flowers develop very weakly, Bro! Need SCR... as it is called for you-I do not know))) Grid horizontal to push the upper and lower light .. and krupnub foliage to break, of course .. Once again, Bro: LED is better than the sodium lamp, but place it to was the same result, in a circle, it is not possible yet !!!.......... at least for 500, at least for 1000 dollars ..

But they work well for flat, vertical scrogs. My grow could have been much better and I know it, had to many outside issues to keep it under control, do proper defoliation etc. But I just wanted to show the growth potential, not my lack of proper plant maintenance lol.

And strip lights assembled into and octagon shape would work for a circular scrog IMO.

Sedan said:

The distant one resembles Curly Sue, from the film of the same name)) ... a little less nitrogen is needed .. drench water рН 6.5 well several times, let it dry and feed, at the rate ...left plants are starving ..

Bro, show me please, how do you dispose of these lamps? I understand from above? And what about the lower branches that are hidden under thick foliage? I would advise you to cut off large leaves to give strength to small ones..With this arrangement of lighting, the lower flowers develop very weakly, Bro! Need SCR... as it is called for you-I do not know))) Grid horizontal to push the upper and lower light .. and krupnub foliage to break, of course .. Once again, Bro: LED is better than the sodium lamp, but place it to was the same result, in a circle, it is not possible yet !!!.......... at least for 500, at least for 1000 dollars ..

Click to expand...

pop22 said:

But they work well for flat, vertical scrogs. My grow could have been much better and I know it, had to many outside issues to keep it under control, do proper defoliation etc. But I just wanted to show the growth potential, not my lack of proper plant maintenance lol.

And strip lights assembled into and octagon shape would work for a circular scrog IMO.

Click to expand...

Yes, I agree that plants with very good potential .. BUT .. in the end, with top lighting, only the top flowers will be mature in the end! The lower ones receive less light, as a consequence, the flowers are undersized and small ... It's technologically wrong!

if you put in a cycle of three to 600 LED in vertical installation, then it will be slightly more than 1X600 sodium lamp .. is there any difference?

PS as you can not understand that if there was an LED in the nature, illuminating in a circle, then I would have bought it, although it costs 500 - science is more important to me. But for now ... alas, there is no such technology ...

created by the stars

At 4.30 am on the site, the alarm went off, and a rapid reaction team immediately left for the site. In hot pursuit, the perpetrator was detained, and placed in a temporary detention facility before the start of the proceedings. A criminal case was opened on the fact of hooliganism, qualified as an act of vandalism and desecration of the shrine in an extremely cynical form.

Kharkоv City))).

So here in the streets we go by cars

Sedan said:

At 4.30 am on the site, the alarm went off, and a rapid reaction team immediately left for the site. In hot pursuit, the perpetrator was detained, and placed in a temporary detention facility before the start of the proceedings. A criminal case was opened on the fact of hooliganism, qualified as an act of vandalism and desecration of the shrine in an extremely cynical form.

View attachment 4016369

Click to expand...

LOLOLOLOL

CATastrophe averted!

I caught my cat doing the same thing... After the fact.

What sort of alarm did you use?

ttystikk said:

What sort of alarm did you use?

Click to expand...

red inscription "Alarm"))))


there is no time to make an exit in the window, while in the corridor. When I do in the window, the room will be locked.))