To Anyone Knowledgeable In DMT Extraction,

10001110101

Member
or in alkaloid extraction at all. I have some phalaris grass starting this spring in my outdoor beds, and was doing research on the extraction of the wonderful compounds, and I realized the process is, very simply put, to acidify, then basify, nonpolar extraction, freeze, and filter. Is lye necessary in the basification, because I have about a liter of both pH up and down just lying around. Would these work? And the nonpolar is just naphtha, correct? I'm an avid camper, so thats no problem. Any help would be much appreciated...... Mucho Thanks.
 

HeatlessBBQ

Well-Known Member
i like your thinking but I have a feeling it'll be a bitch evaporating and drying.

I'd personally stick with pool acid for acidification
then for base. id stick with lye.

it'll only cost you 10-20 bucks for lye and muriatic acid
 

10001110101

Member
The evaporation is from based crystal form dissolved in Naphtha (Colemans fuel), which evaps quite quickly. I dont have a prob buying chemicals for it, I'm just thinking outside the box here, as I bought PH adjusters in quantities well beyond what I needed, and I was thinking maybe I could dispose of them in a useful fashion. Your input is much appreciated, BBQ.
 

suprablaski

Well-Known Member
as usual im gonna point people to a food safe tek using no lye. http://wiki.dmt-nexus.com/Q21Q21's_Vinegar/Lime_A/B_Extraction_Tek

i dont do the 100pct food safe version, i do tek 2 for pure white crystals and use naptha. but you can skip the lye for pickling lime which is very safe to handle. ive done this tek several times and you get a great product with no risk other then those related to working with naptha which are quite minimal imo.
 

HeatlessBBQ

Well-Known Member
i dont do the 100pct food safe version, i do tek 2 for pure white crystals and use naptha. but you can skip the lye for pickling lime which is very safe to handle. ive done this tek several times and you get a great product with no risk other then those related to working with naptha which are quite minimal imo.
be careful what you post...

id take that link off
 

10001110101

Member
Food safe really doesnt worry me either way. Ive heavily used synthetic drugs in the past, like LSD and meth. The damage is done here, y'all. A little bit of hydrochloric acid and lye wont hurt me any more than i've hurt myself, lol. Again thanks for the advice folks.
 

HeatlessBBQ

Well-Known Member
if you do a proper extraction the ending freebase will not
contain any hydrochloric acid or lye. or a very low to low percentage
 

Auzzie07

Well-Known Member
if you do a proper extraction the ending freebase will not
contain any hydrochloric acid or lye. or a very low to low percentage
THIS!

If you're got white crystalline powder that is ever-so-slighty sticky, and smells like a floral version of plastic...you should have no worries. The impurities in an extraction are more likely to be plant oils/fats than your basifier/acidifier/non-polar extractor.
 

ANC

Well-Known Member
lol, just run a tablespoon full through a juicer and hit with some maoi, extraction only has a point if there is stuff in a plant you'd want to avoid.
 

suprablaski

Well-Known Member
if you do a proper extraction the ending freebase will not
contain any hydrochloric acid or lye. or a very low to low percentage
agreed, never ment to say other teks are not safe, but we all know there is alot of stigma about using harsher chemicals that makes people think badly of the drug, im just trying to make sure people who are new are aware the drug is just as safe as making it can be.
i think alot of the reason posting teks became so taboo was because people were afraid of the potential danger of a noob using the chemicals, im just seeking to help clear that up. if you know what your doing all the teks can be totally safe and the dmt very pure
 

ANC

Well-Known Member
Lye is undisolvable in naphta, so its realy not an issue, unless you are realy clumsy at seperating your layers.
 

10001110101

Member
lol, just run a tablespoon full through a juicer and hit with some maoi, extraction only has a point if there is stuff in a plant you'd want to avoid.
Like MAOIs. Some of my meds react poorly with them. If it werent for that, I'd just mix up some Aya brew.
 

Tenner

Well-Known Member
You can use much simpler acids for the extraction, try some for of vinegar or lemon juice I think. Distilled vinegar would work the best. Hope that helps and yeh I made mine with naphta and used sodium hydroxide. Dude just buy a 250g packet of drain cleaner and some vinegar and ur go!!

Edit: If you value your elf spice, smoke it with The Machine. Hit it on google and make it, it will be well worth it!! I wasted 5 hits of spice fucking around with a giant tobacco pipe for fuck sake lol
 

asdf1

Active Member
Im just bumping this thread in intrest of DMT extraction.... Thinking about maybe attempting it sometime soon.... Ive been researching it for a while and am proud of myself for actually understand some of what your talking about.... On a scale of one to ten one being baking cookies and ten being making acid, what would it be... like 3 or 4 maybe? seem about accurate?
 

Auzzie07

Well-Known Member
Im just bumping this thread in intrest of DMT extraction.... Thinking about maybe attempting it sometime soon.... Ive been researching it for a while and am proud of myself for actually understand some of what your talking about.... On a scale of one to ten one being baking cookies and ten being making acid, what would it be... like 3 or 4 maybe? seem about accurate?
5 only because of the danger level of caustic soda.
 

plantvision

Active Member
Edit: If you value your elf spice, smoke it with The Machine. Hit it on google and make it, it will be well worth it!! I wasted 5 hits of spice fucking around with a giant tobacco pipe for fuck sake lol
Sorry I am new to this can you explain farther. Thanks
 
Top