Stealth Cabinets

BudBaby said:

Ill go with whatever you think will suit my stealth needs mate i really am clueless lol.

Have you found any links to them? Let me know what size you rekon and what reducrer to get with it and ill order them.

Ive googled odor socs and came up with nothign so far

Click to expand...

I am going to my grow-shop in the next 30 mins I'll find the measurements of the right one for ya - STELTHY

Cheers mate.

BudBaby said:

Cheers mate.

Click to expand...

Hi again Just got back from the shop grow-shop with news of which Odor Sok Will best support your needs The Odor Sok you'll need is a:- 10" X 24" with a 10" to 6" Reducer, oh and you'll also need a cycle/jubalee clip that can tighten around the Odor Sok etc I'll have a look on the web now to see if I can find an on-line stockist for this item, bare with me dude - STELTHY

BudBaby said:

Ill go with whatever you think will suit my stealth needs mate i really am clueless lol.

Have you found any links to them? Let me know what size you rekon and what reducrer to get with it and ill order them.

Ive googled odor socs and came up with nothign so far

Click to expand...

Hello mate I've found an on-line store that sells them.....Here is a LINK :-


http://www.hydraonline.co.uk/index.php?main_page=products_new&disp_order=1&page=37


They appear on pages 37 and page 38, The one you'll need is :- (On Page 38 ) - OdorSok 250 x 600mm (1700m3/hr)

Price: £85.00

Phew glad I found that Thats the same price they quoted me at my grow-shop - STELTHY

Ok mate can we how many do i need? Can we get away with just one?

BudBaby said:

Ok mate can we how many do i need? Can we get away with just one?

Click to expand...

The one listed above is the one needed for the loft space and is the most important one!

I'll figure out a smaller one for the Veg Cab... Prob a small 6" one will do the job - STELTHY

stelthy said:

The one listed above is the one needed for the loft space and is the most important one!

I'll figure out a smaller one for the Veg Cab... Prob a small 6" one will do the job - STELTHY

Click to expand...

The one we'll need for the Veg Cab is also on page 38 its the 1st one on that page and is a bit more gentle on the wallet

OdorSok 150 x 400mm (646m3/hr)

Price: £45.00 They are the exact 2 you'll need - STELTHY

Ill order them now mate.

stelthy said:

we need the cool air to be taken from the loft and it need s to be fed into the lower part of your cab...Sorry I've been a little slow with the sketches..I'll do some this afternoon and that'll perhaps make things a bit clearer - STELTHY

Click to expand...

Does this mean i will need a 90 degree bend sticking out the side of the cab at the bottom?

If so this will cause me a few problems, firstly the wife wont let me feed the cable through the bottom of the wardrobe, secondly i wanted the cab directly up the wall flush with it. I could really do with the intake hole in the cabinet to be on the top left side of the cab or even better comming out the roof of the cab straightupinto the ceiling.

Misses still isnt happy. I told her i would look good though.

BudBaby said:

Does this mean i will need a 90 degree bend sticking out the side of the cab at the bottom?

If so this will cause me a few problems, firstly the wife wont let me feed the cable through the bottom of the wardrobe, secondly i wanted the cab directly up the wall flush with it. I could really do with the intake hole in the cabinet to be on the top left side of the cab or even better comming out the roof of the cab straightupinto the ceiling.

Misses still isnt happy. I told her i would look good though.

Click to expand...

Thats how I had visulised it....BUT we could run it straight down through the top, by doing this we will need the insulated ducting run into and through the cab... it wont take up alot of room, but thats if thats the only way to keep your Mrs happy then so be it, This will be more complicated for the veg side.... The only way I can imagine it at the moment is by STILL having a 90/45 degree bend sticking out the bottom...............BUT then modding a small (2X4) cab next to the main cab to enclose the small Odor Soc and bend.... There maybe other ways of doing it but thats the main one that sounds most logical. I hope your Mrs cools off a bit, just tell her as with all things you have to make a mess before you can tidy up.....Ive actualy just thought of another way of doing it .....Without the small cab !!! We could run the Veg cool air inlet into the HPS outlet section...BUT!....Section off a corner to house the small 6" Odor Sok in and all we'd need to do is drill a series of small holes on the side and back of that part of the unit (to allow the Odor Sok to breath - Genius and minus the small holes .. very stealth What do you think ? - STELTHY

That sounds good for the venting side mate.

Just thinking about the intake pipe, as i say i want the cab fluch to the wall. I just cant see the misses wanting ducting running all the way up the wardrobe. Ill have a think mate.

Have you got any drawings i can look at then i can visulaize what you mean.

Right insulated ducting is here along with fan and filter. They are massive mate. I think the Rhino will just fit in the top cab but the fan wont.

BudBaby said:

Right insulated ducting is here along with fan and filter. They are massive mate. I think the Rhino will just fit in the top cab but the fan wont.

Click to expand...

I am working on some drawings as we speak... Can you post some pics of the stuff thats turned up and a milk bottle or something as a size comparison cheers man - STELTHY

I just gotta nip out n sort out some stuff for the family I'll post my pics when I get back as I am well pushed for time at the moment - STELTHY

Ok mate thanks. She will let me intake from the bottom of the wardrobe so alls good. I would need to feed the ducting through to the wardrobe and have the 90 degree bend in there then straight up into the loft

Ill get some pics up in a bit mate.

Here is a couple of pics. Rhino is 12" wide x 28" long and the fan is 13" wide and 8 1/2" long.

The top cabs are as you know 300mm. We may have to modify the bottom of the top cabs.

BudBaby said:

Here is a couple of pics. Rhino is 12" wide x 28" long and the fan is 13" wide and 8 1/2" long.

The top cabs are as you know 300mm. We may have to modify the bottom of the top cabs.

Click to expand...

Just got back and am exhausted lol, The fan looks nice did it come with a fixing bracket? Hmm the filter is a bit longer than I thought it would be but thats not a bad thing Also cos the width and length of the top is of decent size it wont be to much work to fit in these items How long till the cabinet gets here now? - STELTHY

First thing Monday. Still waiting on the Mylar.

Well my sister is well into the decorating She is better than me at it so has offered her help

The fan came with no fittings at all mate. Says in the instructions they recommend lined fast clamps for mounting as this reduces noise carry-over into the ducting.

I def like the idea of the air sock being sectioned off in the cab too, uber stealth apart form the small holes. Will make the misses happier than a 90 degree ducting bend sticking out the side