Source for extraction tubes

Anyone know of any mid michigan places that sell quality extraction tubes? Looking for in the Genesee County area.

If there is a wild bills tobacco shop, the one by me sells nice glass tubes for about 40 a pop and gives a 10% discount w ur card. Maybe they will too but they could be independently owned.

Bestvaluevacs.com has great tubes.

If you have a vac pump I'd go right for the closed column or closed loop. I had glass and am going to upgrade, trying to save you a step but they cost like 180 a tube

One of the best I've found is in a stainless beer keg, and is the siphon tube. Then we take the keg, with the top and tube cut off, and make beer.

You can use a ball jar just poke a hole in the lid to inject the butane. make sure you don't screw the cap on when you shoot it because it can build pressure. Put the bud in a jar loosely put the lid on shoot the butane screw the lid and ring on, shake it up, pop the lid off use a nylon stocking to strain it out.

Dr.Pecker said:

You can use a ball jar just poke a hole in the lid to inject the butane. make sure you don't screw the cap on when you shoot it because it can build pressure. Put the bud in a jar loosely put the lid on shoot the butane screw the lid and ring on, shake it up, pop the lid off use a nylon stocking to strain it out.

Click to expand...

No disrespect Dr.

Please, nobody ever do this. Extremely unsafe and very risky.

Get a closed loop system and a vacuum oven. If you can't afford it than don't make bho. Also don't smoke bho until you see lab tests coming back at 0 ppm's unless you want pulmonary fibrosis or small cell carcinoma

Also always distill butane before using it.

Closed-loop system is the safest way to actually to the extraction. (safety from blowing your ass up)
A vacuum oven is the best way to purge the butane back out of your product. (safety of making sure you aren't smoking butane with your hash).
Hand-blasting is open blasting using butane cans and that is very dangerous. To hand blast indoors is really dangerous. But for the people that
are very comfortable hand, or open blasting, you still really want to use a vacuum oven to purge. Just because your house or garage didn't blow up,
doesn't mean the bho is safe to smoke.

QualityCoffee said:

No disrespect Dr.

Please, nobody ever do this. Extremely unsafe and very risky.

Click to expand...

Do it outside. Personally I don't blow the bho I prefer the extraction bags.

Yeah personally, under no circumstances would I ever make BHO indoors. I've always done it outside and there's still a lingering fear of me blowing myself up. It's so good when done properly though....

hyroot said:

Get a closed loop system and a vacuum oven. If you can't afford it than don't make bho. Also don't smoke bho until you see lab tests coming back at 0 ppm's unless you want pulmonary fibrosis or small cell carcinoma

Also always distill butane before using it.

Click to expand...

ok, they say two outs three ain't bad, but where the hell did you pull that piece of horseshit from? if you can't afford a brain, don't make posts...

potsnoberry said:

ok, they say two outs three ain't bad, but where the hell did you pull that piece of horseshit from? if you can't afford a brain, don't make posts...

Click to expand...

Well it's fact actually. Smoking dirty bho will form crystallized deposits in your lungs in turn causing lung disorders. Pulmonary fibrosis being the most common. There's been hundreds of cases of people already getting sick from dirty bho.


Butane has

benzene, propane propellants, hydrocarbon propellants, propane, cyclopropane dimethylmethane, freon, propylhydride, trimethylene, methylpropane, petroleum.


So do you think inhaling these chemicals is healthy and won't cause any harm or respiratory issues. Have some common sense

I had about 11 oz of trim laying around and had someone do it for me. I don't quite have the confidence to open blast myself. They took 30% and I got 70% of the results.I din't get as much as I thought I would. I'm finding it VERY hard to work with it because its incredibly sticky and pulls apart in strings like stringy caramel. Any advice on how to work with it?

How long did they purge it for?
If you cannot put it back in a purge oven for another day or three, then put it in the freezer for about a half hour, then pull it out and quickly do what you need to do with it. (put it into one, or many, containers.)

JeromeT said:

I had about 11 oz of trim laying around and had someone do it for me. I don't quite have the confidence to open blast myself. They took 30% and I got 70% of the results.I din't get as much as I thought I would. I'm finding it VERY hard to work with it because its incredibly sticky and pulls apart in strings like stringy caramel. Any advice on how to work with it?

Click to expand...

Great little clip, nice tools

I'm guessing a day. The only stuff I have experience with is when it's like crystals. I'll try freezing it. Thanks

These guys are the best in flint


Kush is My Cologne

I got all my stuff from bottlesupplyllc in Ypsilanti.

741 Emerick St, Ypsilanti, MI 48198

Theyre equipment is even cheaper than Amazon even after shipping. They have everything you could possibly need including rosin presses, glass pieces, vac ovens, closed loops, and of course open blast tubes. The most important thing to me is that the people who run the place are good level headed and honest people.

BTW i am not affiliated with the place in any way. I just bought a vac oven from there and ive been extremely satisfied with everything.

Or just go on Amazon and buy one for pretty cheap and save yourself the driving and exposure at the place you buy from.