Powder Mildew at the end of week 6

Hello,

So I have some really nice looking plants and I just noticed they have a little bit of PM on their leaves and it is slowly starting to get worse. I just bought some greencure and was wondering if that should be able to treat the problem and keep the powder mildew from spreading for the next 18 days until harvest.

Idk much about pm.. If that don't work do u have any dry kelp?..well ur in late flower.. So foilar could hurt u.. Ull need to be safe... I had something for this.. Let me dig it up

Jackriddle21 said:

Hello,

So I have some really nice looking plants and I just noticed they have a little bit of PM on their leaves and it is slowly starting to get worse. I just bought some greencure and was wondering if that should be able to treat the problem and keep the powder mildew from spreading for the next 18 days until harvest.

Click to expand...

PM ..Powdery Mildew is No biggy

but is a strong indication the bud rot bitch is in the hood

time to reduce water

check Rh daily

increase venting

at this time I'm strong on neem oil

its organic no after taste and cheap

good luck

Id say that greencure will help.. Ur plants mature so it might be damn hard to stop it..are they in sun.. Kf not sun helps if that's a possibility.. All the dl u can... But it can spread so if its just on one part id spray it... Id spray the leaves more than anything... If u think its ok to spray.. Can u get a pic

Thats right.. Neem is supposed to be the shit for it... Neem seems to be the shit in general

Jackriddle21 said:

Hello,

So I have some really nice looking plants and I just noticed they have a little bit of PM on their leaves and it is slowly starting to get worse. I just bought some greencure and was wondering if that should be able to treat the problem and keep the powder mildew from spreading for the next 18 days until harvest.

Click to expand...

fuck the neem to late for that nasty,get some ho2o 3% brown bottle no burning no taste no smell pm gone

Here is a pic from a few days ago. When I get home I will update the pic and focus on a few spots where the PM is. Today, I moved 3 of the plants outdoors in the sun so that they are no longer crowded. I was thinking of spot spraying the PM with 3% hydrogen Peroxide mixed with water. Also, have you guys seen the guys who does the Hydrogen Peroxide bath right when harvesting? If it gets bad I may have to try it. As for now, the PM is staying away from 95% of the buds. It is mainly on fan leaves and only a few sugar leaves.

Purdy dope buddy.. I cant see the pm im it though i cant hardly see anything atm.. But yeah.. Neem will make it taste like sheet so i was just told... That greencure should be ok or listen to thump.. He is an awesome grower

Im with thumper on this one h202 i had PM last year it spreads quick in the rite conditions

I second the H2O2. I believe you can add a little Baking Soda to the solution as well, but I don't remember the details on that. I'm sure if you search it you can find something.

Neem In my older days used to be pretty good.... but you can not come by it these days around here. I believe it was banned a while back.

Even if you do treat the problem, MAKE SURE that you do treat the solution. Spray H2O2 is still increasing moisture... Increase Ventilation, get a Dehumidifier, Defoliate unnecessary foliage will also help your situation.

If you allow the problem to worsen, where you Pm in the garden you may also come to see regular white Fuzzy Mold! Otherwise don't worry to much, PM by itself on just the fan leaves is not the end of the world.

Thank you guys. I bought some H202 and am ready to apply tonight. I was using the apple cider vinegar before with very little success.

roony said:

Im with thumper on this one h202 View attachment 4105547 i had PM last year it spreads quick in the rite conditions

Click to expand...

nice I heard about your stuff where u get?i use the3% straight from bottle no burn

Remove ANY mold aswell. Its only gonna get worse if you dont.
Maybe thin the plant around the affected areas aswell. So more air can hit the mold.
Watch your humidity too. Are you under a big tree or anything? Is the plant getting a lot of shade?

You can also do an h2o2 wash right as you harvest. Then you flick off the water gently and dry with a fan a bit before drying. I did it just to be sure and it worked out quite well on a PM plant i had last year. I was doubtful but it worked better than expected. Taste and quality were not adversely effected. The taste may have actually improved but I vape so it all tastes pretty good.

I also sprayed 3% h2o2 as a foliar spray for a few days when i found out what was going on. The first day or two the spray turned a rusty brown colour. Then it ran like water.

I had an RH 70% problem that I have corrected and I now use more fans to be sure. And defoliate and allow air flow. Trim the bottom larfy shit all out etc.

I am glad i went with a 4 x 4 tent and light that is 3 x 3 coverage. I have room for more fans !

Tim1987 said:

Remove ANY mold aswell. Its only gonna get worse if you dont.
Maybe thin the plant around the affected areas aswell. So more air can hit the mold.
Watch your humidity too. Are you under a big tree or anything? Is the plant getting a lot of shade?

Click to expand...

Yeah you're in a tent. Ya gotta get that bitch dry.
Extra fans and circulation too.
Best of luck.

gwheels said:

You can also do an h2o2 wash right as you harvest. Then you flick off the water gently and dry with a fan a bit before drying. I did it just to be sure and it worked out quite well on a PM plant i had last year. I was doubtful but it worked better than expected. Taste and quality were not adversely effected. The taste may have actually improved but I vape so it all tastes pretty good.

I had an RH 70% problem that I have corrected and I now use more fans to be sure.

Click to expand...

This ^^^^^^

thumper60 said:

nice I heard about your stuff where u get?i use the3% straight from bottle no burn

Click to expand...

Local grow shop

I forgot to mention. After your grow you have to clean out your tent really really well. I swapped out my filter (i had a spare) and cleaned everything with bleach and water. Then i let it air out and dry and started over.

It can linger in your tent if you do not take care of it after the grow.

You guys are awesome. I am applying the H202 tonight and if for some reason it does not work then I will try greencure which is coming via fed ex right now. My current perspective wants me to add more fans, cut unnecessary foliage, spray only the leaves that are affected with H202 and play it by ear. If worse comes to worse, I will harvest in 2 1/2 weeks when the buds are ready and do the H202 wash before trimming. Trying not to use the greencure on the buds at all. After I harvest, I am going to bleach the shit out of my tent, my carbon filter, fan, and everything. I will even be replacing the ducting. How does that sound?

Jackriddle21 said:

You guys are awesome. I am applying the H202 tonight and if for some reason it does not work then I will try greencure which is coming via fed ex right now. My current perspective wants me to add more fans, cut unnecessary foliage, spray only the leaves that are affected with H202 and play it by ear. If worse comes to worse, I will harvest in 2 1/2 weeks when the buds are ready and do the H202 wash before trimming. Trying not to use the greencure on the buds at all. After I harvest, I am going to bleach the shit out of my tent, my carbon filter, fan, and everything. I will even be replacing the ducting. How does that sound?

Click to expand...

Remove the affected area aswell. Cant stress it enough. You dont wanna smoke that shit anyway