PLC Cannabis Dispensary

MaryMaryMary

Well-Known Member
I agree with you but, in the end, it really comes down to preference. I threw my grinder out because it is a pain cleaning it. The coffee grinder accumulates a nice amount of kief without the need to clean it. You only need to scrape off the top and voila! Afterwards, I press the kief because, in my opinion, it has a longer vape session pressed than unpressed. I ordered some Rockstar kief for my wife's sleeping problems. It looks good, purity wise.
if you have a good quality grinder it should be really easy to clean it i use this one: http://torontovaporizer.ca/zeus-bolt-grinder.html

just toss all the grinder components into a ziplock bag with rubbing alcohol 99% and salt, shake it for a few mins and after you rinse with water your grinder will be like new
 

gb123

Well-Known Member
It's 35/g for lab tested zero residual solvent shatter/crumble...If your going to talk shit, check first.. I only know because before I ordered I asked for testing results...all lab verified. I'm happy...Do what you choose.
That humorous and UTTER BULLSHIT :lol:

Sure It;s OK have at er :lol:

It also shows you know nothing about the process. :lol:
 

nsbudca

Well-Known Member
I agree with you but, in the end, it really comes down to preference. I threw my grinder out because it is a pain cleaning it. The coffee grinder accumulates a nice amount of kief without the need to clean it. You only need to scrape off the top and voila! Afterwards, I press the kief because, in my opinion, it has a longer vape session pressed than unpressed. I ordered some Rockstar kief for my wife's sleeping problems. It looks good, purity wise.
I like the container the keif came in. Pretty slick looking. And it does last longer pressed for sure.
 

Gmack420

Well-Known Member
It's 35/g for lab tested zero residual solvent shatter/crumble...If your going to talk shit, check first.. I only know because before I ordered I asked for testing results...all lab verified. I'm happy...Do what you choose.
Is it butane or co2 extracted?
 

FarmingToronto

Well-Known Member
That humorous and UTTER BULLSHIT :lol:

Sure It;s OK have at er :lol:

It also shows you know nothing about the process. :lol:
I'm not sitting here pretending I'm making the stuff buddy, and since I'm sure most people prefer this remain a positive thread that's about all I'm going to touch on oh great and all knowing source of info gb123

Is it butane or co2 extracted?
From speaking to the guys there, its a closed loop butane system their using.
 

Gmack420

Well-Known Member
I'm not sitting here pretending I'm making the stuff buddy, and since I'm sure most people prefer this remain a positive thread that's about all I'm going to touch on oh great and all knowing source of info gb123



From speaking to the guys there, its a closed loop butane system their using.
Try some co2 extracts if you can find a cc that carries them. No solvent residue to worrie about.
 

redi jedi

Well-Known Member
I'm not sitting here pretending I'm making the stuff buddy, and since I'm sure most people prefer this remain a positive thread that's about all I'm going to touch on oh great and all knowing source of info gb123



From speaking to the guys there, its a closed loop butane system their using.
Before the MMPR it was illegal to perform any kind of analysis of cannabis or cannabis extracts. So I wouldn't believe anyone saying "lab verified" also. The labs just wouldn't do it, not worth the risk to them...trust me I've tried.

Technically its still illegal unless your an LP and have the license. But I think now it may be easier to find a lab willing. Just a guess though.

If they're using a true closed loop system, they would be reclaiming the butane over and over again. The butane would be very close to pure...like 99.999%. As close to pure as its practically going to get.
 

FarmingToronto

Well-Known Member
Before the MMPR it was illegal to perform any kind of analysis of cannabis or cannabis extracts. So I wouldn't believe anyone saying "lab verified" also. The labs just wouldn't do it, not worth the risk to them...trust me I've tried.

Technically its still illegal unless your an LP and have the license. But I think now it may be easier to find a lab willing. Just a guess though.

If they're using a true closed loop system, they would be reclaiming the butane over and over again. The butane would be very close to pure...like 99.999%. As close to pure as its practically going to get.
I don't want to speak for them, I do know there are lab results I can't/won't post for privacy/personal information reasons however, I will say that they have an email/phone # and are happy to send information/results to those who have questions.

-FT
 

oddish

Well-Known Member
if you have a good quality grinder it should be really easy to clean it i use this one: http://torontovaporizer.ca/zeus-bolt-grinder.html

just toss all the grinder components into a ziplock bag with rubbing alcohol 99% and salt, shake it for a few mins and after you rinse with water your grinder will be like new
This is great advice.
I got the Space Case grinder and it made me realize a quality grinder can make a HUGE difference.
I'm going to try cleaning it this way though and see if it works.
 

oddish

Well-Known Member
Before the MMPR it was illegal to perform any kind of analysis of cannabis or cannabis extracts. So I wouldn't believe anyone saying "lab verified" also. The labs just wouldn't do it, not worth the risk to them...trust me I've tried.

Technically its still illegal unless your an LP and have the license. But I think now it may be easier to find a lab willing. Just a guess though.

If they're using a true closed loop system, they would be reclaiming the butane over and over again. The butane would be very close to pure...like 99.999%. As close to pure as its practically going to get.
There's lots of places outside of and inside Canada that have been doing tests for a long time now.
I know 3 CCs that have sent their product away to be tested over 2 years ago and one lab was out East in Canada and one was in California. LCS lists results on their website from Steep Hill Lab.
 

redi jedi

Well-Known Member
I don't want to speak for them, I do know there are lab results I can't/won't post for privacy/personal information reasons however, I will say that they have an email/phone # and are happy to send information/results to those who have questions.

-FT
I get it, could you tell us what they tested for and the results?
 

redi jedi

Well-Known Member
There's lots of places outside of and inside Canada that have been doing tests for a long time now.
I know 3 CCs that have sent their product away to be tested over 2 years ago and one lab was out East in Canada and one was in California. LCS lists results on their website from Steep Hill Lab.
Oh really?..you know 3 clubs that say they had product tested 2 years ago...go figure
 

Flash63

Well-Known Member
all bubble tastes pretty much the same as most of the taste has been washed out sadly...
Fresh frozen material hand mixed,and belief me there is flavour...again depending on the terpene profile of the weed and the gland size,i do not mix my different strains together as each does have a distinctive taste and effect...
 

FarmingToronto

Well-Known Member
I get it, could you tell us what they tested for and the results?
Hey so I figured I got in this far why not call them to make sure it's cool. I was given the ok so these are the 2 pics of lab documents I was sent last month.
PLC_results.jpg PLC_results2.jpg

If there were any leftover questions, PLC is happy to take them on their toll free... I can't answer more, just a dude who orders LOL *shrug*

-FT
 

oddish

Well-Known Member
Fresh frozen material hand mixed,and belief me there is flavour...again depending on the terpene profile of the weed and the gland size,i do not mix my different strains together as each does have a distinctive taste and effect...
All the bubble I've ever used is packed with delicious flavour.
 

The Hippy

Well-Known Member
This is great advice.
I got the Space Case grinder and it made me realize a quality grinder can make a HUGE difference.
I'm going to try cleaning it this way though and see if it works.
Yup for sure Oddish, the space case grinder is the top of the heep. . I have the large titanium unit and it will grind better and faster than any other I've tried. Pricey but worth every penny imo. I got mine for cost but it was still 80 bucks. Turns out was worth every penny.
http://www.spacegrinders.com/space-case-4-pc-titanium-grinder-large/
 

oddish

Well-Known Member
Exact same grinder I have and the exact same experience. Game changer. The crystal catcher fills much faster than my other grinders too, but I don't find it's diminishing the quality of the ground product at all either.
 

The Hippy

Well-Known Member
Exact same grinder I have and the exact same experience. Game changer. The crystal catcher fills much faster than my other grinders too, but I don't find it's diminishing the quality of the ground product at all either.
Well I find with most grinders seem to clog the screen. space case included. what i like about it is I can load it to over flowing and simply apply Hippy pressure and she grinds like a New York fag on his first date.
The thing is a work horse and chews threw anything that gets shoved in it. It is one tough grinder and the teeth have never bent . And I jam full buds into the thing that won't actually fit in it lol
 
Top