Ohms Law ??? Can 62vdc become 145vdc ???

BST

BST

Active Member
I have a lpc 150-2450(31~62vdc) if ran parallel string of 4 lines @ 612.5 ma. Do you get 245vdc?
 
Isawthelight

Isawthelight

Well-Known Member
BST said:
I have a lpc 150-2450(31~62vdc) if ran parallel string of 4 lines @ 612.5 ma. Do you get 245vdc?
Click to expand...
Your four parallel strings will measure no more than 62 vdc. BTW if only one diode or wire in a string breaks, the other three strings will carry 816 ma. Can your diodes carry this extra current?
 
BST

BST

Active Member
Isawthelight said:
Your four parallel strings will measure no more than 62 vdc. BTW if only one diode or wire in a string breaks, the other three strings will carry 816 ma. Can your diodes carry this extra current?
Click to expand...
So how many fv can each string handle? I ducked up and ordered a 2450 instead of 1400ma? To little time to much kush. I'm going to have order a cob to match. Any ideas?
 
BST

BST

Active Member
Parallel. I think I'm going to try to get as close to 150w and see what happens to a single
 
Isawthelight

Isawthelight

Well-Known Member
BST said:
Parallel. I think I'm going to try to get as close to 150w and see what happens to a single
Click to expand...
3 vero 29 in parallel = 38.9 Vf (max) x 2.45 Amps = 94.57 watts. Putting more Vero 29 in parallel will not increase the watts to the plants but this will make each cob operate at a lower and more efficient temperature.
 
Last edited:
BST

BST

Active Member
Isawthelight said:
3 vero 29 in parallel = 38.9 Vf (max) x 2.45 Amps = 94.57 watts. Putting more Vero 29 in parallel will not increase the watts to the plants but this will make each cob operate at a lower and more efficient temperature.
Click to expand...
Yes but a lpc150-2450 is a cc driver. If a Vero 29 has 39Vf can ya run 3 on it. Lpc150-2450 vdc is 31~62. Does vdc stay the same???
 
You must log in or register to reply here.
Top