New Aeroflo2 60 Grow! Started from the ground up! Lots of Pics!!

Yea for sure.. I only have 1 white rhino thats going to flower though.. I used the other one for the mother.. I think that I might just keep that as a private reserve!

HAPPY 4TH everyone!!! smoke it up!

UPDATE: sorry its been a few days.. Ive been kind of busy... I am making a couple changes to the room and I still havent flipped the lights... Actually, my pump got turned off for about 20 hrs. and I almost lost the entire crop! Most of the plants came through ok but some are just not the same. I will post more pics later tonight of everything new in the room. I am having an issue and I'm not sure what it is. HELP ME!!

This is happening to a few of the plants.. I dont know if its a burn or a deficiency... Please help me.. The partial yellow greening is mostly on the Sour D clones that I used. The brown spots are on a few different plants.. The pH was around 5.7 and the ppm was 810.. I lowered it to about 490 last night. View attachment 1033211View attachment 1033229View attachment 1033226View attachment 1033224View attachment 1033221View attachment 1033218Some of the stems on some of the leaves are purple!! What causes this? I read a little about it and I get different info from different sources.View attachment 1033219View attachment 1033216View attachment 1033215View attachment 1033214View attachment 1033213View attachment 1033210View attachment 1033212View attachment 1033256ANY INFO IS HELPFUL!! THANK YOU ALL!!

Other updated pics!

UPDATES: Ok so I will put up all the pics after the updates.. I'm a little less than a week into flower right now.. I did 60 hrs of dark and witched and flipped the lights on Tuesday. I have all of the HPS bulbs in there now instead of the MH conversion bulbs. They are 12/12 from 7:30 pm to 7:30 am they are on. I am trying to keep the room @ 45% RH and 74 degrees. When the lights are on, my CO2 ppms are at 750. I did a res change today.. I am changing it every week. Before I change it, I throw in H202 and florakleen for about 3 hours to clean it out. I put in fresh RO and nutes in today. I put 1tsp/gal diamond nectar, 1ml/gal floralicious plus, 1ml/gal super thrive, .5 tsp/gal koolbloom, 1.5 tsp/gal of each of the 3 flora series nutes and 6 tsp total of pH up. My readings were ppm-1200, pH5.7, temp 70. I am also in the process of putting in the frame that I will hook the trellis to and also partially bend the plants so that they maximize light usage! The mothers are doing well! I found mold on one of them today. I am now going to have to get a sulfur burner and a dehumidifier. I got the mold because the RH in that room is like 60% (way too high). I just couldn't afford another dehumidifier yet... now im screwed! There may be more I'm forgetting so I will post as I remember!

These are the Northern Lights seeds (feminized) that I got from Nirvana!Heres the mommys!Like I said, I started to notice some mold on one of them.. Any suggestions on the quickest solutions... I'm all ears! Now onto the main event...I am using 3/4" pvc for the frame.. I have a 16'x4' trellis that will go over top. I will also be tying the plants on the outer tubes to that so that they grow sideways and all of the leaves get light! This is also a new addition.. I just blows outside air into the room.. My carbon filter is so powerful that it sucks in the walls so I added this fan to blow fresh air in!!

As always, ALL questions, comments, concerns etc are welcome and very much appreciated!!

Hey all.... Sorry I haven't updated in a while but I was out of town and now my camera has broken... These are all pics that I took with my phone!! I'm about 2 weeks into flower right now and you can see that the buds are forming nicely!! I have also built the frame for the trellis...I am going to try and tie that plants down tomorrow so That I can maximize the light to the lower nodes!! View attachment 1069907View attachment 1069920View attachment 1069919View attachment 1069918View attachment 1069917View attachment 1069916View attachment 1069915View attachment 1069914View attachment 1069913View attachment 1069912View attachment 1069911View attachment 1069910View attachment 1069909View attachment 1069908View attachment 1069921

damn.. i thought this thread was a goner!! thanks for the update..shit is looking good

Thanks smokey.. I was just on vacay and now my stupid waterproof camera got water in it lol

I tied down the plants today.. I mostly tied them to the sides tso that the middle gets more light and so that the lower buds could get more light also!I did some serious trimming to the mothers.. I hadn't trimmed them in about 2 weeks and they were out of control!The mothers...I built this table today so that I could have the dehumidifier drain straight into the RO bin.. I use these bins as fresh water for the res.Tri-Meter...

Alright.. here are some more pics taken from my cellphone!! Sorry they are not the greatest but I just ordered the new Canon Rebel t1i.. Its being shipped so as soon as it gets here, I will post some high quality pics..

There are some serious trichomes developing on the flowers and they are becoming more and more dense by the day. Tuesday was the 3 week mark of me switching the lights so next tues will be a month I am gettin all anxious! I notice that some of the lower leaves are dying off. I think it due to lack of light but there is nothing more that I can do right now. Maybe for next crop I will start looking into side lighting. I am also going to need that in my mother room. I also just ordered a dehumidifier for that room. The lower leaves dont look so hot in the mother room either because the t5's are too far away! Current reading in the flowering room are co2 ppm-1250, temp- 70-78, humidity- 40.. Water stats-- pH-6.8, temp-69, ppm 1000!! ALL QUESTIONS COMMENTS AND CONCERNS ARE ALWAYS WELCOME!!!

i still have mites on all my leaves.. can I still spray with azatrol? tomorrow it will be one month exactly since I flipped the lights! HELP!!!!!

Heres some new pics for everyone to enjoy!! There are some pics of the moms, flowering room, macro shots of buds and trichomes, I insulated the a/c exhaust and added backdraft dampers to all of the exhaust lines, there are pics of the mother area where I just added a new dehumidifier today! Any other questions comments or concerns are always welcome!! LET ME KNOW WHAT YOU THINK!!!

I'm currently running a home made 64 site aero/nft system I built off of that design. I used 98"x5" fence tubes. I can tell this isn't your first time, and hope to have a room exactly like yours in a few months. Great grow, I can't wait to see what kind of yields you get! What strain r u running again?

Do you have any pics if your root mass? I've been in veg fir 3 weeks and I have some 18" long. Also... How many inches was your smallest/biggest plants BEFORE flower, and what are their size now? How many oz's do you plan to get from this harvest?

i have 11 different strains growing to check out which ones give the best smoke and the best yield. The biggest yielder looks to be the Hawaiin Maui Waui but there are some others close on her heels!

dpagano7486 said:

i still have mites on all my leaves.. can I still spray with azatrol? tomorrow it will be one month exactly since I flipped the lights! HELP!!!!!

Click to expand...

My local hydro shop told me that u can spray aza upto a week before harvest. He also said the secret is to spray every so many days because aza works on bugs not eggs. So you have to spray after the eggs hatch but befor the new bugs have a chance to reproduce. I think he said every 3 or 4 days for 20 days. Don't quote me. Opinions are like assholes...

I'm hopeing to get 20-30 grams per plant. I have some plants at 12" tall now. The reason I was asking about the size before flower, is Cuz I don't want to overgrow them. I'd hate to have to top them after 12/12, because I can only let them get so tall. I'll be posting some pics and starting a journal when I get some pics transferred from my phone or my laptop. Kudos again on the aero grow. I'm excited to see how it turns out for ya!

Im hoping to get a minimum of 1 lb. per light... I have 4. Maybe I could get more but this is my first time using aero and I have made some mistakes along the way. With all my extras in the room though I am hoping to still get around 4 lbs. As far as the azatrol... you can absolutely not spray that close to harvest. It stays in the plants system for up to 30 days and will make the bud smell and taste horrible.. In addition, the last 30 days of harvest you can not spray anything at all as it will damage the buds! I was in veg for a while because of some mistakes that I made but my tallest plant was about 2' tall.. generally people flip the lights when they are between 6" and 12" tall... All of my plants were different heights though so I just played the waiting game... The plants are over 4' tall right now... I can still move the lights up about 8 inches if I need to though.. Also, I dont know if you noticed all the pvc around the system.. I have some of the plants tied down so that they grow off to the side so that the lower buds get more light! I dont have any pics of the roots currently as they are too hard to pick up now... I had an issues with root rot due to line temp and all t he plants had to grow new healthier roots! When I took my seeds out of the ezclone60, there were some that were 18"... check back through the old pages. There are some pics from when I did the transfer from the ezclone.. check it out!! Let me know when you get some pics up and stuff so I can check it out... Let me know if I forgot anything or if you have any other questions!