Cyproz
Well-Known Member
what kind of adapters am i looking for?
So i want to run some Netafim stake sprayers. Looking to do about 18.
they are 3.2 GPH per sprayer and i will use 20 so 65ish GPH needed at 22-55PSI
I would like to use this pump
to go to this filter which has the required 120mesh filter for the netafim system. this is a threaded in and out 3/4 inch.
and it will go to 1/2 inch poly tube which will have the lines to the pots.
![r/cannabiscultivation - what kind of adapters am i looking for? r/cannabiscultivation - what kind of adapters am i looking for?](/proxy.php?image=https%3A%2F%2Fpreview.redd.it%2F75fpiwbgejd61.png%3Fwidth%3D743%26format%3Dpng%26auto%3Dwebp%26s%3Deeb2d96493a522c3ff950ff816308a2e033b9589&hash=f77b1734e47d8a915e297bb6c7219c16)
4x8 footprint
![r/cannabiscultivation - what kind of adapters am i looking for? r/cannabiscultivation - what kind of adapters am i looking for?](/proxy.php?image=https%3A%2F%2Fpreview.redd.it%2Fznvvxxowejd61.png%3Fwidth%3D801%26format%3Dpng%26auto%3Dwebp%26s%3D3a12dd680c9c8351e34349db3265d0e8ef55449e&hash=911849a8eeaabd679e400a66227eb60c)
So i want to run some Netafim stake sprayers. Looking to do about 18.
they are 3.2 GPH per sprayer and i will use 20 so 65ish GPH needed at 22-55PSI
I would like to use this pump
to go to this filter which has the required 120mesh filter for the netafim system. this is a threaded in and out 3/4 inch.
and it will go to 1/2 inch poly tube which will have the lines to the pots.
![r/cannabiscultivation - what kind of adapters am i looking for? r/cannabiscultivation - what kind of adapters am i looking for?](/proxy.php?image=https%3A%2F%2Fpreview.redd.it%2F75fpiwbgejd61.png%3Fwidth%3D743%26format%3Dpng%26auto%3Dwebp%26s%3Deeb2d96493a522c3ff950ff816308a2e033b9589&hash=f77b1734e47d8a915e297bb6c7219c16)
- i would like to add a pressure monitor/gauge somewhere in the line if i can find adapter to polyelthlene tubing for threaded bits.
- should i just use 3/4 inch and find adapter off the pump?
- are their 90 degree pieces i can make a nice square like diagram below for polyethylene tubing?
4x8 footprint
![r/cannabiscultivation - what kind of adapters am i looking for? r/cannabiscultivation - what kind of adapters am i looking for?](/proxy.php?image=https%3A%2F%2Fpreview.redd.it%2Fznvvxxowejd61.png%3Fwidth%3D801%26format%3Dpng%26auto%3Dwebp%26s%3D3a12dd680c9c8351e34349db3265d0e8ef55449e&hash=911849a8eeaabd679e400a66227eb60c)