Need help for new room .

M

markash03

Member
Hello everyone,trying to buy my first LED light for my small room Length 270cm x Width 200 cm and wanted to have some help in choosing the best light for it.

I was looking at this 3,which one do you think is best for my room?

Spectrum King SK 602
HLG 550
Timber Fatty VS

Thanks to everyone.
 
Johnny Lawrence

Johnny Lawrence

Well-Known Member
If you're using the whole space, you're probably going to need 2 lights.

If you insist on one light for that space, then out of the 3, the Timber rig is your best bet. But to be honest, I don't know much about SK lights. Either way, you'll be lacking light at the edges.

2 550s, or 2 of Timber's smaller fixtures(Redwood) would murder that space.
 
INF Flux

INF Flux

Well-Known Member
That sk looks like older tech, probably still great, but the other two are the best bang for bock. Spreading out the light source has it's advantages
The hlg is a lot slimmer, if ceiling height is an issue.
 
M

markash03

Member
Johnny Lawrence said:
If you're using the whole space, you're probably going to need 2 lights.

If you insist on one light for that space, then out of the 3, the Timber rig is your best bet. But to be honest, I don't know much about SK lights. Either way, you'll be lacking light at the edges.

2 550s, or 2 of Timber's smaller fixtures(Redwood) would murder that space.
Click to expand...
I was thinking to spend around 1800/2200 $ so the 2x Timber Redwood would be nice to try.Do you have a idea what i can harvest with 2x Timber Redwood if everything goes well ?With LED as well i should use the formula 1g x watt ?
 
RainDan

RainDan

Well-Known Member
markash03 said:
I was thinking to spend around 1800/2200 $ so the 2x Timber Redwood would be nice to try.Do you have a idea what i can harvest with 2x Timber Redwood if everything goes well ?With LED as well i should use the formula 1g x watt ?
Click to expand...
Hello @markash03

I saw your post and wanted to let you know we are offering FREE SHIPPING on all Redwood VS (and Model 4VS) through the end of September.

If you have any additional questions about our lights, or LEDs in general, please feel free to send me a PM or an email at [email protected].

Have a good day.

Regards,
Dan
 
coreywebster

coreywebster

Well-Known Member
markash03 said:
I was thinking to spend around 1800/2200 $ so the 2x Timber Redwood would be nice to try.Do you have a idea what i can harvest with 2x Timber Redwood if everything goes well ?With LED as well i should use the formula 1g x watt ?
Click to expand...
Yield will depend on experience, strain, time frame, ect ect... But 1.5gpw is attainable if all is in order. More has been done, less should be expected until your competent. :bigjoint:
 
You must log in or register to reply here.
Top