wonderinaliceland
Active Member
thought I would show some pics of my setup as of now....Not a lot of plants right now but..
It's 6 T8 bulbs ...4- 6500k ,2 -2700k and two cfl 6500 k....all GE bulbs.....i used standard display boards for the walls...there three foot tall and white on the inside so there perfect for holding in the lumens..... The bigger plants are purple diesel clones that i cut . The small one is bag seed out of some dank purple that i got. I use a paint roller pan and dryer duct for ac/heat.I cut a hole in the plastic somewhat flexible pant roller pan,(like 99 cent)...duct taped and thumb tacked the roller pan over my ac outlet.....ran the flex line where i needed and attached to the ceiling. The foor foot lights are attached by chain's that are simply thumb tacked on one side , and they sit right on the display boards on the otherside. ( the display boards are pretty sturdy, i just reinforce the corners with duct tape.) I have two display boards taped together. one side thumb nailed to the wall and coming out 39" then turning to hold up the lights on the other side. I'll run the HPS when they get closer to flower.
COST
display boards-$8 a piece -walmart
Light fixtures-$12 a piece -walmart
Lights- $6 a pair- osh
paint pan- 99 cent- anywhere
Dryer duct-$4 Lowes or home depot
not bad...
by first grow used all floro's just swithed to 5 2700k bulbs 1 6500k during flower. but only yielded a little over a half of bud per plant...but the resin production was through the roof..and i wasn't balancing ph then. So could of been better I'm sure
Any comments or questions would be great
It's 6 T8 bulbs ...4- 6500k ,2 -2700k and two cfl 6500 k....all GE bulbs.....i used standard display boards for the walls...there three foot tall and white on the inside so there perfect for holding in the lumens..... The bigger plants are purple diesel clones that i cut . The small one is bag seed out of some dank purple that i got. I use a paint roller pan and dryer duct for ac/heat.I cut a hole in the plastic somewhat flexible pant roller pan,(like 99 cent)...duct taped and thumb tacked the roller pan over my ac outlet.....ran the flex line where i needed and attached to the ceiling. The foor foot lights are attached by chain's that are simply thumb tacked on one side , and they sit right on the display boards on the otherside. ( the display boards are pretty sturdy, i just reinforce the corners with duct tape.) I have two display boards taped together. one side thumb nailed to the wall and coming out 39" then turning to hold up the lights on the other side. I'll run the HPS when they get closer to flower.
COST
display boards-$8 a piece -walmart
Light fixtures-$12 a piece -walmart
Lights- $6 a pair- osh
paint pan- 99 cent- anywhere
Dryer duct-$4 Lowes or home depot
not bad...
by first grow used all floro's just swithed to 5 2700k bulbs 1 6500k during flower. but only yielded a little over a half of bud per plant...but the resin production was through the roof..and i wasn't balancing ph then. So could of been better I'm sure
Any comments or questions would be great
