My new set up

Here is my new set up. I am trying DWC trays. Im going to use this to flower then i have my old 4x8 room for veg and a tent for breeding isolation. Thoughts?

2 x 3'x6' trays covered with 10mm corrugated plastic. 16 holes each. Each tray has air stones and a circulation pump.

2 x 1000w hortilux Super HPS bulbs with 1000w Galaxy ballasts

Light rail 3.5 set up to move both lights across the 6 foot tables

CAP Gen1 propane CO2 generator with titan Atlas 2 CO2 Controller

Stealth RO 100 reverse osmosis water filter

that all sounds great mate,i wreckon you got the perfect room there in the cellar an i think your gonna turn that room into some thing good you could make a pro grow room in there,u wanna put a thread up asking other users how they would build it in there,i'd love a cellar in my house

zeerocool said:

Here is my new set up. I am trying DWC trays. Im going to use this to flower then i have my old 4x8 room for veg and a tent for breeding isolation. Thoughts?

2 x 3'x6' trays covered with 10mm corrugated plastic. 16 holes each. Each tray has air stones and a circulation pump.

2 x 1000w hortilux Super HPS bulbs with 1000w Galaxy ballasts

Light rail 3.5 set up to move both lights across the 6 foot tables

CAP Gen1 propane CO2 generator with titan Atlas 2 CO2 Controller

Stealth RO 100 reverse osmosis water filter

View attachment 2532206

Click to expand...

And here I thought I was a genius for setting the trays on buckets as opposed to building tables.

Dunno how DWC tables will work. Keep in mind that you can buy:

http://www.homedepot.com/p/t/202328879?catalogId=10053&langId=-1&keyword=totse&storeId=10051&N=5yc1v&R=202328879#.USNWfoYt11M
http://www.ebay.com/itm/5-Botanicare-Bulkhead-Fitting-3-4-Barbed-Bag-of-5-/350659478868?pt=LH_DefaultDomain_0&hash=item51a4ef0554
a pump, hole saw and sheet of XPS board and use them as ebb and flow tables.

There's no way you can stick the tables end to end? It would give you a 4'x12' table, and then you could add one more light and get a perfect 4'x4' square under each one.

Like this: http://i48.tinypic.com/2v1qntx.jpg

Its not complete. I need to wrap it all in panda plastic, make it air tight and install a closed loop carbon filter just to make sure no smell gets out. I also have a HEPA filter running.

I wanted to stick with DWC due to its speed rather then ebb and flow. I been using DWC for a while and love the results. Mostly you see DWC done in buckets or Rubbermaid bins with one or a few plants. I wanted a DWC system that could hold many plants. So i went with the trays. This can be easily converted to ebb and flow if i want to later.

The 5G buckets was a no brainer. I was looking at the task of building tables and had so much other things to do in the room that it was just easy.

Not enough room to stick them end to end. Besides I wanted to try the light mover as I understand I can keep the lights closer without burning them and the distance they are traveling is minimal.

Looks really good!!!