Tap water runs through the big blue filters at the top left, than to the Ro unit in the center left, and keeps a 65 gal res full with a float valve to the left.
Than the green pump pulls ro water from the res and is pressurized to 45 psi.
That than run though 3 injecters that pull stock concentrated nutes up from the black buckets.
The injectors are each adjusted by ppm and than set at that %. And same way with PH.
As long as I mix my stock nutes the same I never have to readjust the injecters. And can go a couple months without ever having to mix nutes and adjust hp I just simply open a valve and fill bucket if I need to water by hand or set the drip timers.
After the nutes are mixed it runs through a mess filter and than onto 3 sets of valves for feeding and flushing 3 different zones if I want to harvest every 3 weeks.
So last week of flower I'll close the feed valve and open the flush valve.
The waste run off is collected and pumped into a drain.
Than the green pump pulls ro water from the res and is pressurized to 45 psi.
That than run though 3 injecters that pull stock concentrated nutes up from the black buckets.
The injectors are each adjusted by ppm and than set at that %. And same way with PH.
As long as I mix my stock nutes the same I never have to readjust the injecters. And can go a couple months without ever having to mix nutes and adjust hp I just simply open a valve and fill bucket if I need to water by hand or set the drip timers.
After the nutes are mixed it runs through a mess filter and than onto 3 sets of valves for feeding and flushing 3 different zones if I want to harvest every 3 weeks.
So last week of flower I'll close the feed valve and open the flush valve.
The waste run off is collected and pumped into a drain.
