MHRB Extraction

ANC

ANC

Well-Known Member
Don't use alot of naphta at a time.. rather do lots of small washes... else you will just end up haveing to evaporate most of it before you can access the contents... solvents are expensive.

As always a seperatory funnel or at least a thin necked vessel is ideal for pulls. A syringe or pipette can be used...
 
Anonymiss1969

Anonymiss1969

Active Member
ANC said:
Don't use alot of naphta at a time.. rather do lots of small washes... else you will just end up haveing to evaporate most of it before you can access the contents... solvents are expensive.

As always a seperatory funnel or at least a thin necked vessel is ideal for pulls. A syringe or pipette can be used...
Click to expand...
How much would you do at a time?
 
ANC

ANC

Well-Known Member
you don;t have to split the pulls, just pour them together. You will likely have to use a bit more naphta for those large jars. I was a bit confused by your question. the problem with the jars is the large surface area, makes a small standing colomb of naphta to pull off. Which is why I prefer to use bottles...

So the main downside to the large jars is that you will need to evap quite a bit of solvent to get to the good concentrations.
 
Anonymiss1969

Anonymiss1969

Active Member
ANC said:
you don;t have to split the pulls, just pour them together. You will likely have to use a bit more naphta for those large jars. I was a bit confused by your question. the problem with the jars is the large surface area, makes a small standing colomb of naphta to pull off. Which is why I prefer to use bottles...

So the main downside to the large jars is that you will need to evap quite a bit of solvent to get to the good concentrations.
Click to expand...
Thanks. I'm gunna evaporate that down and then Ill let ya know how it goes.

Edit: Where's the best place to do this? I can't put it outside cause it's too cold but I need some ventilation...
 
ANC

ANC

Well-Known Member
hmmm jus tbe patient, its pretty volatile and should evap just fine left alone... don;t let it evap too far, if it goes milky when you blow on top it should be ok to stick in the freezer.
 
Anonymiss1969

Anonymiss1969

Active Member
ANC said:
hmmm jus tbe patient, its pretty volatile and should evap just fine left alone... don;t let it evap too far, if it goes milky when you blow on top it should be ok to stick in the freezer.
Click to expand...
Alright. So how long does it take to evap off if its in like a pyrex dish? (Just so I know how often to check on it)

Edit: Hours or Days?
 
Anonymiss1969

Anonymiss1969

Active Member
Before following what I'll call the ANC tek, after extracting the naphtha it would be a slightly yellow color and that would yield about .5%. After trying the ANC tek, my jar was filled with what looked like piss from a person who hadn't drank water for a week. Super stoked for that. +rep for ANC
 
Anonymiss1969

Anonymiss1969

Active Member
After drying out the super yellow stuff and having my buddies try some they said it was the dankest shit they've ever had. All should bow to ANC and worship him as their new god!
 
Anonymiss1969

Anonymiss1969

Active Member
floridasucks said:
hah... nice. can u get any pics?

i just put in an order for 8 ozs of bark btw..:bigjoint:
Click to expand...
I'm not really a picture type of guy... Sorry.
Nice on that new order. I'm really irritated that things like dmt and acid are worse to have than meth (according to law). I've never heard of anyone doin a B and E and committing felony theft over hallucinogens...
 
You must log in or register to reply here.
Top