making Lsd

Hey there buddies i have been searching the net for a few weeks now to learn how to make my own lsd i dont want to make bucket loads just some personell of some strong gear does anyone know any ifo that i might have over looked or indeed there own recipes that they could share it would be much appreciated ,,

thanks

I don't belive this is something you can realisticly do safely at home.

then how comes people are making it for festivals ,, it has to be home made they live in camper vans not laboartys m8

eddiedragon said:

then how comes people are making it for festivals ,, it has to be home made they live in camper vans not laboartys m8

Click to expand...

Google ftw.

While you are at it, google ergotism.

You will not be able to make legit LSD without lab equipment and the works. And chances are you will make a deadly poison so I'd say stear clear of it and just extract morning glory seeds much safer easier to do with shit around the house.

yea you would need ergotamine tartarate ...but t hat's actually the only thing I know about it...if you had a lab you could follow Shulgin's method from Tikhal or Pikhal (not sure which book) but that's assuming you have a lab and the knowledge of chemistry to do this.

It would be tihkal... deals with tryptamines like LSD etc...

http://www.erowid.org/library/books_online/tihkal/tihkal26.shtml

how come everytime someone gets on here to announce their attempt to create this we just talk down to them? we tell them theyre not smart enough and tell them they dont have the chemistry know-how. somebodys making it and i seriously doubt its all being made in a lab. i say if you want to try it and you can get ahold of everything you need then go for it. let me know how it turns out.

farmer bill said:

how come everytime someone gets on here to announce their attempt to create this we just talk down to them? we tell them theyre not smart enough and tell them they dont have the chemistry know-how. somebodys making it and i seriously doubt its all being made in a lab. i say if you want to try it and you can get ahold of everything you need then go for it. let me know how it turns out.

Click to expand...

I would say the answer lies in the old adage, "if you have to ask, you will never know"

The truth is very little of what you find on the market is actualy LSD... these days.


SYNTHESIS : A solution of 6.7 g KOH in 100 mL H2O, under an inert atmosphere and magnetically stirred, was brought to 75 °C, and 10 g ergotamine tartrate (ET) added. The reaction mixture turned yellow as the ergotamine went into solution over the course of 1 h. The stirring was continued for an additional 3 h. The reaction mixture was cooled to about 10 °C with an external ice bath, and acidified to a pH of about 3.0 by the dropwise addition of 2.5 N H2SO4. White solids started to appear early in the neutralization; approximately 60 mL of sulfuric acid was required. The reaction mixture was cooled overnight, the solids removed by filtration, and the filter cake washed with 10 mL Et2O. The dry solids were transferred to a beaker, suspended in 50 mL 15 % ammonia in anhydrous ethanol, stirred for 1 h, and separated by decantation. This extraction was repeated, and the original decantation and the second extract combined and filtered to remove a few hundred milligrams of unwanted solids. The clear filtrate was stripped of solvent under vacuum, the residual solids dissolved in 50 mL of 1% aqueous ammonia, and this solution was acidified as before with 2.5 N H2SO4. The precipitated solids were removed by filtration and washed with Et2O until free of color. After drying under vacuum to a constant weight, there was obtained 3.5 g of d-lysergic acid hydrate, which should be stored in a dark, sealed container.

A suspension of 3.15 g d-lysergic acid hydrate and 7.1 g of diethylamine in 150 mL CHCl3 was brought to reflux with stirring. With the external heating removed, there was added 3.4 g POCl3 over the course of 2 min, at a rate sufficient to maintain refluxing conditions. The mixture was held at reflux for an additional 5 min, at which point everything had gone into solution. After returning to room temperature, the solution was added to 200 mL of 1 N NH4OH. The phases were separated, the organic phase dried over anhydrous MgSO4, filtered, and the solvent removed under vacuum. The residue was chromatographed over alumina with elution employing a 3:1 C6H6/CHCl3 mixture, and the collected fraction stripped of solvent under hard vacuum to a constant weight. This free-base solid can be recrystallized from benzene to give white crystals with a melting point of 87-92 °C. IR (in cm-1): 750, 776, 850, 937 and 996, with the carbonyl at 1631. The mass spectrum of the free base has a strong parent peak at mass 323, with sizable fragments at masses of 181, 196, 207 and 221.

This base was dissolved in warm, dry MeOH, using 4 mL per g of product. There was then added dry d-tartaric acid (0.232 g per g of LSD base), and the clear warm solution treated with Et2O dropwise until the cloudiness did not dispel on continued stirring. This opaqueness set to a fine crystalline suspension (this is achieved more quickly with seeding) and the solution allowed to crystallize overnight in the refrigerator. Ambient light should be severely restricted during these procedures. The product was removed by filtration, washed sparingly with cold methanol, with a cold 1:1 MeOH/Et2O mixture, and then dried to constant weight. The white crystalline product was lysergic acid diethylamide tartrate with two molecules of methanol of crystallization, with a mp of about 200 °C with decomposition, and weighed 3.11 g (66%). Repeated recrystallizations from methanol produced a product that became progressively less soluble, and eventually virtually insoluble, as the purity increased. A totally pure salt, when dry and when shaken in the dark, will emit small flashes of white light.

You'd be better off making some LSA with morning glory seeds..which is probably what those people in the campers are making. There's no way you could make real LSD without lab equipment and proper chemicals...really.

farmer bill said:

how come everytime someone gets on here to announce their attempt to create this we just talk down to them? we tell them theyre not smart enough and tell them they dont have the chemistry know-how. somebodys making it and i seriously doubt its all being made in a lab. i say if you want to try it and you can get ahold of everything you need then go for it. let me know how it turns out.

Click to expand...

cause if they were smart enough they would be able to figure out the synthesis wit out turning too a bunch of strangers for a recipe and process that is quite a serious thing........

Yeah you need quite a few black listed chemicals that are watched like a hawk. Never mind the very expensive lab equipment. Hope you have a bunch of money and the wits to possisbly go to jail.

i wasnt going to make a lab and get all the chemicals even i know am not smart enough for that lol ,,i was really just wondering if anyone new an easy (safe) way of making some sort of Lsd substitue but just as strong ,,, like the morning glory extraction has anyone done it ?

All humans are inherently the same. So as long as someone has the drive/determination to learn something they can learn it. Personally I'd stick with LSA and shrooms.

You could do the LSA extraction and turn it into LSH, which is thought to be close in potency in LSD, no hard to manufacture, and fairly safe just as LSD is.

Peace

do u know how to do this process m8 ?

Why don't you check google? Also DMT-nexus has some good info on Lysergic substances.

Peace

I don't know how you are possibly gonna acquire reagent grade petroleum ether, pure methanol, pure chloroform, tartaric acid, pure ether, potassium hydroxide, nitrogen gas, and hydrochloric acid.. only if your a licensed chemist, and have access to a lab and its equipment. I believe you may be able to make semi-pure LSD-25 at home, with makeshift equiment and chemicals.. but it will be dangerous as breathing the fumes will be dangerous and could cause you to trip. There are also need to chill chemicals to 0 degrees celcius, and keeping the compounds in stable forms. If you have the equipment and know-how.. go for it bud.

Not to mention the risk of acquiring ergotism or suffering from ergot poisoning, but the fact is there is a procedure, it CAN be done.

Peace