Making (Juice) for Wick Vapor Pen Cartridges

doses.YEM.rx

doses.YEM.rx

New Member
Hello to all! In the past I have experimented with a few vaporizer pens for concentrates. I haven't found one that i have liked but think its the taste from the coil of the atomizer. So recently started puffing on a Hookah pen to not smoke cigarettes and know you can make a BHO for these cartridges? Anyone with a methods, suggestions, or tips in making this would be highly grateful. It would also help when giving your advice if you could give amounts of each bho and the other product (veg oil or glycerin) have heard of using both. I currently am using a ego hookah pen setup


Thank you and have a wonderful day:weed:
 
X

XRE

Member
You don't want to be using veg oil, veg glycerine can be used, but PG (propylene glycol) is better, concentrate seems to dissolve better in it, and it's thinner so it wicks better in ecig devices. Especially considering it can thicken up a bit once the concentrate is added.

There are quite a few different ways to make concentrate infused juice, look down a few threads and there is one with several pages where a few different methods are outlined.

My personal method is to first take a tiny amount of high-proof ethanol and dissolve the concentrate into this, using the least amount of alcohol possible, using a glass dropper works good for this. If you start with a crumble/dry bho/wax/budder/etc type concentrate instead of a shatter type it dissolves quicker. I then leave the glass bottle over heat for a little bit to evaporate some of the alcohol off, until the concentrate is reduced to a thicker, but still runny/slightly liquidly consistency.

Then I add the PG, of a ratio of 1 to 1, meaning with PG I match the volume of the thinned out concentrate. Keep it over heat, stirring until its mixed together. Let it cool down and it's ready to put into pretty much anything that takes regular ejuice. It's quite potent, as the total volume off the juice is only slightly over double that of the starting concentrate (50% PG, 45% concentrate, 5% alcohol)

With this method you do get a tiny amount of residual alcohol, so it's important to use ethanol, not Iso or anything else. E-liquid for ecig use has alcohol as a flavor base, or thinning agent quite frequently, it's perfectly safe to vape, especially in such low concentrations.

You can also dissolve the concentrate straight into the PG, but I've had worse luck with that. It took much, much longer to make, and I could never get it mixed completely. It would either separate or I'd have chunks in the juice. With the alcohol method you are basically loosening up the concentrate and allowing it to dissolve better into the juice, and if you evap the alcohol prior to putting the PG in (evaped until still runny, but most alcohol is gone) you get very little alcohol, but still a very well mixed stable product that's more potent than a lot of the methods I've seen.
 
Sirdabsalot462

Sirdabsalot462

Well-Known Member
I'm torn myself..

If you make some really killer oil, cutting with some tasty PG..

Oh my my my...it tastes so very nice..
Actually, today was my first time hitting a true properly made pg /bho mix..


Love love love it..

Course maybe these uh..high powered narcotics that I'm finally given...in the hour or so of my recovery from a complete hip replacement..

These fuck bag nurses, I swear to fuck.. I told them how much medicine I'm prescribed regularly..

But, since I was already on the Dilaudid..the nurse says

” no sir, you are already on this POWERFUL drip, I'll ask the doc”

Turns out she never asked, so I demanded to talk to the Docs,..

I may have gotten a couple of different nurses in big trouble...as the Doc was not happy that I suffered the whole night
 
GrowinDad

GrowinDad

Well-Known Member
Thanks for the alcohol rec. I have been using ISO oil,mixed with PG. I heat in a ramekin inside a crock pot with a little water to mix up. But I still get clumping as time goes on.
 
justugh

justugh

Well-Known Member
i also sawl something about using hemp seed oil

the bho mixes very well with it but the taste is something else so u should look into flavoring

and thank u for the ach i got some moonshine here 168% personal bottle going to mess with your work .................i was able to make a fairly decent mix out of VG it did not break all down but most of it was aborbed and the color changed to a green brown

going to try heating it up and passing it those a old silk screen that was about to be tossed ...........trying to capture the last of the black that would not desolve
 
bez420

bez420

Well-Known Member
XRE said:
You don't want to be using veg oil, veg glycerine can be used, but PG (propylene glycol) is better, concentrate seems to dissolve better in it, and it's thinner so it wicks better in ecig devices. Especially considering it can thicken up a bit once the concentrate is added.

There are quite a few different ways to make concentrate infused juice, look down a few threads and there is one with several pages where a few different methods are outlined.

My personal method is to first take a tiny amount of high-proof ethanol and dissolve the concentrate into this, using the least amount of alcohol possible, using a glass dropper works good for this. If you start with a crumble/dry bho/wax/budder/etc type concentrate instead of a shatter type it dissolves quicker. I then leave the glass bottle over heat for a little bit to evaporate some of the alcohol off, until the concentrate is reduced to a thicker, but still runny/slightly liquidly consistency.

Then I add the PG, of a ratio of 1 to 1, meaning with PG I match the volume of the thinned out concentrate. Keep it over heat, stirring until its mixed together. Let it cool down and it's ready to put into pretty much anything that takes regular ejuice. It's quite potent, as the total volume off the juice is only slightly over double that of the starting concentrate (50% PG, 45% concentrate, 5% alcohol)

With this method you do get a tiny amount of residual alcohol, so it's important to use ethanol, not Iso or anything else. E-liquid for ecig use has alcohol as a flavor base, or thinning agent quite frequently, it's perfectly safe to vape, especially in such low concentrations.

You can also dissolve the concentrate straight into the PG, but I've had worse luck with that. It took much, much longer to make, and I could never get it mixed completely. It would either separate or I'd have chunks in the juice. With the alcohol method you are basically loosening up the concentrate and allowing it to dissolve better into the juice, and if you evap the alcohol prior to putting the PG in (evaped until still runny, but most alcohol is gone) you get very little alcohol, but still a very well mixed stable product that's more potent than a lot of the methods I've seen.
Click to expand...
You say ethanol? What about using Everclear?
 
doses.YEM.rx

doses.YEM.rx

New Member
Just wanted to let you know I did it step by step how you listed and it turned out great. Thank again on sharing the the knowledge
 
justugh

justugh

Well-Known Member
Try Hemp seed oil
i am not shitting u i just used some on a fairly large peice of bho compared to the amount of oil
just heated the buttom of the dram vile for about 20 secs and it all desolved ( the white clear turned a nice green once all the bho was gone) ..........i am going to the vape shop tomarrow grabbing a new bottom wick tank .......plan to buy 4 tanks
1 for the oil as is now
1 with the oil mixed stronger
1 wirh strong oil and a favor mix
1 with a strong mix flavor and VG
 
You must log in or register to reply here.
Top