SimplySmokin
Well-Known Member
We got the new law and it took awhile to get my card but did get legal. Since then, been on this lil quest to build a grow room and grow enough "quality" weed to take care of my needs.
Started out with a little 3' x 3' x 4' reflective closet under my passive flow hanging furnace. Amounted to a foil lined box with 3 - 40 watt 4' flouro's. That allowed me time to start a grow room build.
First thing I did was build me a bench from some 2 x 3's I had in the back from the bent and twisted sale. Added a scrap piece of vinal for a cover and a top from a computer center that was thrown out for shelving. Final demensions 68"x32"x41"
Sliding doors were easy. I used the aluminum rails from an old set of shower doors also rescued from the alley and a couple chunks of 3/8" plywood. This area will serve as my new Veg Room.
This is also where I made one of my first mistakes...., seems I thought it would be a great idea to build in this huge mirror as the back wall of my under bench veg room. Well I learned through an earlier post this is just not the case. The problem with mirrors is in light diffusion and can be researched in a post I have in Newbies Central entitled.. https://www.rollitup.org/newbie-central/396027-mirrors-no-good-seriously.html
I have temporarily leaned some rigid foil back insulation against the back until I get to Billings for Mylar... Which according to scientific backed research is teh best of my options.
(Followed by my next best option, Flat White Paint)
Next I needed to put up a wall to confine my Grow Room as other than tthe little wall behind my bench and around the hanging furnace the basement was entirely open. Using more of the 3 x 3's from the bent and twisted sale I constructed a couple stud walls and secured in place on the main beam dividing the basement, I had a hollow core door out in the garage I cut down to fit and hung between the two stubwalls I had constructed. For covering these walls I had a roll of 4' Foil backed duct wrap (insulation) and tacked it up over the studs. All things considered it makes that $8 in materials look good.
That left me an 11' x 13' main floor area to use as my tentative flower room. Since I only had the one "Purple Buddah" started from the onset, and 1 small clone from her that I threw into flowering after 2 weeks of veg to kinda see what I could expect from 6 shorter plants, I set up my 3 lights that I have scavenged from the first little foil box and added another $20 bill for a total of 5 - 40 watt 4' flouro's mixed spectrums hung vertically on the wall and a 150 watt Hps hanging. I then built a small prtable stud i use to wrap additional 4' Foil backed duct wrap to put reflective all around my flowering plant.
Since Budget is always a concern I made myself a "halo" from 2 plastic hangers to support tubing for my gallon jug co2 generator.
Well so far, there she be, I believe the next thing I need to invest in is more lighting followed by a legitiment co2 system. Whats your thoughts ?
I plan on updating this as I udate the room.
Started out with a little 3' x 3' x 4' reflective closet under my passive flow hanging furnace. Amounted to a foil lined box with 3 - 40 watt 4' flouro's. That allowed me time to start a grow room build.
First thing I did was build me a bench from some 2 x 3's I had in the back from the bent and twisted sale. Added a scrap piece of vinal for a cover and a top from a computer center that was thrown out for shelving. Final demensions 68"x32"x41"
Sliding doors were easy. I used the aluminum rails from an old set of shower doors also rescued from the alley and a couple chunks of 3/8" plywood. This area will serve as my new Veg Room.
This is also where I made one of my first mistakes...., seems I thought it would be a great idea to build in this huge mirror as the back wall of my under bench veg room. Well I learned through an earlier post this is just not the case. The problem with mirrors is in light diffusion and can be researched in a post I have in Newbies Central entitled.. https://www.rollitup.org/newbie-central/396027-mirrors-no-good-seriously.html
I have temporarily leaned some rigid foil back insulation against the back until I get to Billings for Mylar... Which according to scientific backed research is teh best of my options.
(Followed by my next best option, Flat White Paint)
Next I needed to put up a wall to confine my Grow Room as other than tthe little wall behind my bench and around the hanging furnace the basement was entirely open. Using more of the 3 x 3's from the bent and twisted sale I constructed a couple stud walls and secured in place on the main beam dividing the basement, I had a hollow core door out in the garage I cut down to fit and hung between the two stubwalls I had constructed. For covering these walls I had a roll of 4' Foil backed duct wrap (insulation) and tacked it up over the studs. All things considered it makes that $8 in materials look good.
That left me an 11' x 13' main floor area to use as my tentative flower room. Since I only had the one "Purple Buddah" started from the onset, and 1 small clone from her that I threw into flowering after 2 weeks of veg to kinda see what I could expect from 6 shorter plants, I set up my 3 lights that I have scavenged from the first little foil box and added another $20 bill for a total of 5 - 40 watt 4' flouro's mixed spectrums hung vertically on the wall and a 150 watt Hps hanging. I then built a small prtable stud i use to wrap additional 4' Foil backed duct wrap to put reflective all around my flowering plant.
Since Budget is always a concern I made myself a "halo" from 2 plastic hangers to support tubing for my gallon jug co2 generator.
Well so far, there she be, I believe the next thing I need to invest in is more lighting followed by a legitiment co2 system. Whats your thoughts ?
I plan on updating this as I udate the room.