How to run multiple titan controllers off of one timer.

So I'm going to have 12 lights and want to use the titan helios 4. so 3 controller running down the ceiling of a 30 foot length room in the center mounted on the ceiling. Just for cleanliness and not doing huge runs on a larger controller to control all the lights. Is there a better option than stringing extension cords with three way female ends to daisy chain them down to a master controller? Can I just splice all the timer cords together down the run and add a plug at the end?

As long as all the trigger cords get to the timer you are good, they can be connected in parallel however it's easiest. You could have a duplex receptacle at one end of a cable run (likely #14), run that into a box with another duplex receptacle and daisy chain that to another receptacle box and end up at the timer. So you could chain as many of those receptacles as you wish really, the trigger relays don't require much current.

Okay thanks! That was my favorite idea just using 14/2 and cable manage it well. But new to all the electrical just wanted to make sure I wasn't missing something obvious. Thanks again! Have a certifies electrician friend over seeing all the malor stuff brut won't be around for little stuff like this.

Edit: does the first in the run need to be I a receptacle or can they just all be daisy chained to the master timer with a plan on the end. All the controllers will be wired it.