Here to help... Ask me anything

KittenKiller

KittenKiller

Well-Known Member
the j man 365 said:
hi, i have a question about my seeds and how they have'nt germinated yet. they are from the white lable company and its been two plus weeks since they have been in between styrofoam plates in moist tissues and they havent even begun to sprout so i just took them and put them in a pot underneath my light...will they end up sparkin out of the pots or did i just buy some lame ass seeds?
any help would be appreciated.
Click to expand...
You should have seen the taproot sprout only two days after germination. I think the seeds are done for. This never happened to me but you might want to check with White Label to see if they can reimburse you. Send pics.
 
KittenKiller

KittenKiller

Well-Known Member
inhaleindica said:
Hey man I have my first grow. I am a little concerned about the temps. I am out in southern cal and the temps are 84 and up all week. its been 3 days since I picked up 3 clones from a local dispensary. The temps are 90 consistently. I have 1 fan blowing in on the bottom and 2 fans up high blowing out. its out in the corner of my walk in closet. its kinda hard to bring the temps down when it is 90 degrees outside. Will I be alright as long as I have fresh air coming in? Any suggestions without using the pricey A/C just for 3 freakin plants lol. Thanks in Advance
Click to expand...
Why don't you try putting it close to a window? If you're talking about just the weather, don't worry. MJ is a tropical plant. It grows along the equator in warm environs like africa so don't even trip.
 
zelfna90

zelfna90

Member
:sad:I got a issue. Im currently 12 weeks into growing and i need to go back home. Ill be gone for a month and if i set up a hydroponic system for it without nutrients for a month will that be bad for it? and if it is is there slow dissolving nutrient pills or tablets to put in the water my pump sucks up. PLEASE LET ME KNOW thnx and peacccee!!!
 
S

scotthmt

Active Member
Can you run a carbon filter in a room with a fan on it and the fan suck in air in the room and blows out air in the room, basiclaly i does not exhaust any air that goes throgh it. The temps and humidity is all within good levels and CO2 is supplied. Or would this nott work?
 
grow4joe

grow4joe

Active Member
Hello
have a question i could use some advice on if anyone has an idea,
many thanks....
i have some plants that i cut down on saturday evening, (check the 400watt club for pics) before i cut them some of the buds on the top of the plant were starting to go crispy and dry to the touch, although the middle was still sticky and damp. The light was not close enough to burn and two desk fans and an extractor fan was helping the ventlation in there also.
Ive cut them down and some buds have been quick drying and some are hanging, (pics on 400watt club, last page..i think...)
There is no white mildew on any of the buds, i have been checking all of them constantly as this is my first grow and i dont want to lose my crop to mold ect.. the little buds ive sampled are very tasty even though quick dryed and very potent but im a little worried about the buds that are crispy already..
any advice on my crispy nugs?? (pics are useless as you cant tell unless you touch)

many thanks,

:peace:
.G4J.
 
P

ponoheart

Member
Aloha from Hawaii,
Do you have any advice on the white rhino strain feeding plan? like... is it sensitive to ferts, i read that it likes to start off at 5.7/5.8 and climb thru to 6.5/6.6 by the end of flowering but i cant find specifics. My actual life force depends on my success... I plan to go ahead with House and Garden.
Ive grown for several years but not since i "got out" for the same. Like we say here,"Chance 'em brah!"
 
RoBoMikE510

RoBoMikE510

Member
where has this thread been all my life? starting my first grow tomorrow in grow case. i cant seem to find this answer anywhere? whats best for pc grow case. Clones? or Seeds..? to excites cant sleep !!!
 
postednote

postednote

Member
ooh hello :)
Wondered if you could help me without pictures? (my computer wont let me upload any ><)
My plant's been budding for like, 2 weeks now.
its got a LOT of crystals on it :)
But some of the hairs are like, brown and some are still quite white.
I dont know if i should harvest?
She's about 30 - 40 cm tall and I dont want her much bigger due to where she is in my house...
would appreciate some help!

Thanks :D
 
slk

slk

Well-Known Member
mercury vapor 1000 watt light. How do you feel about this kind of lighting for flowering. If you don't care for this lighting system can I use a differant bulb with no problems?
 
D

doobisnack9

Member
hey hows it going im a noob with indoor grows and i was wondering why my baby's leaves has started showing greyish spots and one turning a brownish color ond the end of its first leaf i have looked everywere and there is 3 diffrent answer's but im not forsure on which one it might be
 

Attachments

B

budlight12

Member
i have one plant, that due to stress went hermi. it is the only plant. It is full of big ass buds and some seeds. Will these seeeds be good or hermi?
 
stoneyhigh

stoneyhigh

Member
i just started growin and my plants are about 2 weeks old. the bigger of the 2 i have growing seems to be dyin. its leaves are curling under and the tip has turned brown and the rest of it seems to be turning a dark green colour...
i have only been giving them water no nutes yet and have them growin in a 6 gallon pot in miracle grow compost... any idea whats wrong? am i over/under feeding them or is the light scorching them
the light is a 7 watt cfl with a home made reflector which im using until they get stronger at which point i have a 400w sodium bulb...
the temp is between 20 and 30 degrees C... please help i dont want my babies to die
 
P

pikeygirl

Member
hi
this is my first attempt at growing
anyhow i have grown 4 sweettooths under 1x600 w son-t lamp in pots after they grew to about 1 1/2 - 2 ft i put them ito flowering stages all was well resin up nice very frosty after 6-7 weeks the hairs are tirning to an amber colour like strands of tobacco so i figured this was time to pull them down how ever i have notice the day b4 i cropped the resin / frostyness had disapaired from 100% frostyness to like 10-20 % have i pulled em to early / late why has the frostin disapaired. they are now hanging upside down in a cool dark area and will be checkin every 2-3 days for signs of mold
 
H

houstonblowskush

Well-Known Member
pikeygirl said:
hi
this is my first attempt at growing
anyhow i have grown 4 sweettooths under 1x600 w son-t lamp in pots after they grew to about 1 1/2 - 2 ft i put them ito flowering stages all was well resin up nice very frosty after 6-7 weeks the hairs are tirning to an amber colour like strands of tobacco so i figured this was time to pull them down how ever i have notice the day b4 i cropped the resin / frostyness had disapaired from 100% frostyness to like 10-20 % have i pulled em to early / late why has the frostin disapaired. they are now hanging upside down in a cool dark area and will be checkin every 2-3 days for signs of mold
Click to expand...
First mistake I noticed in your post was the fact you harvested your plant on pistil colors. Thats not a indicating factor that your plants are ready to harvest. You need to go by the trich colors. There is a post in the newbies section on this.

Its sounds like the frost either disappeared due to the handling of the plant during harvest or the extreme fragile state they were in when you harvested them to early.6-7 weeks seems a bit early IMO
 
H

houstonblowskush

Well-Known Member
stoneyhigh said:
i just started growin and my plants are about 2 weeks old. the bigger of the 2 i have growing seems to be dyin. its leaves are curling under and the tip has turned brown and the rest of it seems to be turning a dark green colour...
i have only been giving them water no nutes yet and have them growin in a 6 gallon pot in miracle grow compost... any idea whats wrong? am i over/under feeding them or is the light scorching them
the light is a 7 watt cfl with a home made reflector which im using until they get stronger at which point i have a 400w sodium bulb...
the temp is between 20 and 30 degrees C... please help i dont want my babies to die
Click to expand...
Mircale grow is known for being too hot for MJ plants. I think you are suffering from nute burn. Flush your meduim well and see how that works out
 
H

houstonblowskush

Well-Known Member
budlight12 said:
i have one plant, that due to stress went hermi. it is the only plant. It is full of big ass buds and some seeds. Will these seeeds be good or hermi?
Click to expand...
they will pass on the hermi trait to some of them which is considered a bad thing.

But on the other hand one of the most popular strain lines the chem line is a hermie bag seed plant.

So grow if you dare
 
O

ottawabrad

Member
I have a new setup and am having some humidity issues. I can't seem to get the humidity down in my flower room. Here is the setup...

Room Info
Room Size - 6'x14' Divided into one 6'x8' flower room and one 6'x6' veg room (Plastic divider)
Room Location - Basement corner
Intake Air - Drawn through the wall to a 10'x14' room that usually has the door closed. Using a 300cfm fan.
Exhaust - Through a carbon filter through my cool tube (1000hps) into a wall box out a partially cracked window (no backpressure at all). Using a 500cfm inline fan.

Flower Room
Room Size - 6'x8'
Light - 1000HPS
Circulation - Osculating Pedestal Fan
Humidity - 70-75% (This is the problem)
Temp - 68 degrees when lights are off, 76 degrees when lights are on. I have a cool tube just haven't installed it yet to try and lower the temp a bit.
Notes - Both intake and exhaust are in this room. Running a dehumidifier (17 Liter). Currently 21 large plants in flower.

Veg Room
Room Size - 6'x6'
Light - 400HPS and 4'T8 double bulb)
Circulation - Osculating Wall Mount Fan
Humidity - 65-70%
Notes - Intake is just a vent from one room to the other no intake fan. This room works perfectly so far. Currently 24 in veg.

Any suggestions as to how to lower my humidity in this room? Would a stronger exhaust fan help?
 
H

houstonblowskush

Well-Known Member
ottawabrad said:
I have a new setup and am having some humidity issues. I can't seem to get the humidity down in my flower room. Here is the setup...

Room Info
Room Size - 6'x14' Divided into one 6'x8' flower room and one 6'x6' veg room (Plastic divider)
Room Location - Basement corner
Intake Air - Drawn through the wall to a 10'x14' room that usually has the door closed. Using a 300cfm fan.
Exhaust - Through a carbon filter through my cool tube (1000hps) into a wall box out a partially cracked window (no backpressure at all). Using a 500cfm inline fan.

Flower Room
Room Size - 6'x8'
Light - 1000HPS
Circulation - Osculating Pedestal Fan
Humidity - 70-75% (This is the problem)
Temp - 68 degrees when lights are off, 76 degrees when lights are on. I have a cool tube just haven't installed it yet to try and lower the temp a bit.
Notes - Both intake and exhaust are in this room. Running a dehumidifier (17 Liter). Currently 21 large plants in flower.

Veg Room
Room Size - 6'x6'
Light - 400HPS and 4'T8 double bulb)
Circulation - Osculating Wall Mount Fan
Humidity - 65-70%
Notes - Intake is just a vent from one room to the other no intake fan. This room works perfectly so far. Currently 24 in veg.

Any suggestions as to how to lower my humidity in this room? Would a stronger exhaust fan help?
Click to expand...
naw its the air intaking not the air exhausting thats the problem. I think if you put an actual dehumidifier in the room instead of on intake it would be better. Or maybe the dehumidifier you have in the first place is bad and not woorking accurately. Hows the humidity before intake?
 
You must log in or register to reply here.
Top