Hash and Oil Picture Thread
- Thread starter Sirdabsalot462
- Start date
ODanksta
Well-Known Member
Lmfao..
Thundercat
Well-Known Member
its crazy when you watch the alcohol go in clear and come out purple!
ODanksta
Well-Known Member
Not stable yet, but 1.5 grams from 32 grams. Lol horrible return, i ran this for my buddy today. Its not my pot, he grew it, not me. I just made it for him. Dehydrated at 105F for 30 mins, frozen for 30 mins. Fresh no cure. One and a third cans of 300 ml 5x whipit brand. Strain is master kush from attitude. Cut early at 60ish days, organically grown with tap water 350ppm's and general organics. Horribly grown but nice shatter for what little he got.
budbro18
Well-Known Member
You cant/arent supposed to purge on anything but ptfe, minus the obvious glass, SS, etc... All of those parchments have some sort of coating on them that could come off with solvents being in contact. But should be fine to purge onto.
ODanksta
Well-Known Member
I tired to blast on parchment paper one time, i could definitely see something coming out of the paper. I thought maybe raw might have invented something that would work.
budbro18
Well-Known Member
Yeah just try the oil slick ptfe. Its pretty nice. Theres a learning curve but its nice.
ODanksta
Well-Known Member
Ok just blasted 46.6 grams. Lots of popcorn nugs, pretty frosty stuff. 6 days dry, dehydrated for a hour, frozen for 30 mins. Whipit 5x. Lohan (L.A confidential x trainwreck) 70 days, 50% frosty trics. Organically grown with NFTG. I will post pics after its done purging im guessing 2.5 to 3 grams
Last edited:
ODanksta
Well-Known Member
So are you saying you blast on the oil slick pads? I hear thats a no-no too. Ive also been told its not good to purge on them either because they cant breath from underneath like parchment paper can.
budbro18
Well-Known Member
No only the PTFE "slick sheets" and i only sometimes do that. Depends on a few things. Its teflon and there isnt supposed to be any reaction to it. Youre thinking of the slick pads made of silicone with the green strip and shit. I use one of those under my teflon/parchment when vac purging because it more evenly disperses heat than the bottom of my chamber.
i also do the first 24 hours ish on the teflon then flip to parchment for the rest of my purge.
ODanksta
Well-Known Member
Im scared that the freezer will add moisture, thats why i dehydrate it first then freeze. I usually dont have time, to freeze for that long anyways. Shatter has became so popular where I live I cant keep up to the demand.niceeee guess work. only 30 minute freeze eh? i tend to freeze mine for a good 24hrs +
never tried a quick freeze, too scared
Bubbagineer
Well-Known Member
Oops hehe
Bubbagineer
Well-Known Member
I have a very nice hook up with co2, i love shatter as much as any one else. But the co2 i get goes into e-cigs tanks, its thicker then e-juice. Pros- great for public use, taste, the connection never runs out. Cons- 60 a gram. He breaks deals on ounces but the shit is still expensive. And Im pretty sure its coming out of Colorado. But it looks different then the co2 that is being posted on here. Its the same consistency as honey, but the color of syrup. But hey 80K for the equipment I can understand why it fetches the highest prices[/QUOTE][QUOTE="Bubbagineer, post: 10889534, member: 539867"
If anyone can tell me of any commercially available CO2 shatter, I would appreciate it.
Almost all co2 extract you see is that honey consistency stuff, that's why I think no one else actually has co2 shatter. I've done another run and now that I'm educamated I think I will be able to get a much larger and cleaner patty. More to follow prob next week
Twitch
Well-Known Member
if there is moister in your freezer then it is not at freezing temps.... freezers have zero humidity
and then you pull pout and blast....
budbro18
Well-Known Member
UGH! I have a story for you guys.
So i got some trim that looked amazing, for trim, over 350gs of it. Smelled not too bad, like trim that had been frozen for a month or so. And a good split with 2/3 goin to us and the grower only wantin 1/3 So i got to runnin it and it was all goin smooth. Use up almost a whole case after runnin 5 tubes at about 70-80gs per tube. So we have our hotplate set low as always with a pan as a buffer in between. It was a lot colder than usual outside, around 50 vs the usual 70-80, so when we came back after the last blast aand saw it was runny we just thought the combo of cold weather chilling the hot plate/buffer pan plus having blasted 350gs which even at like 5% is 17 ish grams. That much oil is usually pretty runny in the medium sized pyrex we have since its so thick. So we bring it inside for the scrape and heres where the bulllshit starts.
Grab a razor and first line, ZERO stickiness. The stuff flows like its not even touching the bottom of the pyrex. So right off the bat im 99% sure i know whats wrong. So we pour off whats left onto our PTFE sheet that we do the first purge on incase large amounts of excess hydrocarbons are left in it. The stuff flies out of the pyrex almost like its OILED........
At this point im now positive i know what it is. But we start the heat and let it sit at 100 degrees to see if maybe the large amount/outside cold temps kept some butane trapped in it. No real reaction to the heat couple bubbles but only for a few seconds. So we say fuck it and throw the lid on and pull a vac. Get about 28.5" and the stuff starts bubbling mad like its completely unpurged and filled with butane. We watch closely and over the next 30-45 minutes it doesnt stop.
By then i knew exactly what it was. Or i thought at least. NEEM OIL!!! This was my first guess because a lot of growers see "use up to 2 weeks before harvest" on the bottle and do just that. Even though a good grower knows if you have a bug/mold problem to take care of it in veg because it only gets worse in flower. Better hold back a crop a week or 2 rather than spend 8-10 weeks fighting bugs/mold. They also mistake that "2 weeks before harvest" because that is more for fruits and veggies, which have hard outter skins that you can rinse off before ingesting.
So i call my friend who knows him and im pissed! I now have about an OZ of nasty contaminated oil that i want to throw in the growers face. He gets ahold of the guy and its EVEN WORSE???? I didnt think it was possible. One one hand the result is slightly better but not much.
HE USED COOKING SPRAY!!!!!!! Like pam or canned olive oil........... I wanted to chop every one of this guys plants down for being such a fucking SCRUB at growing. His excuse was "it drowns out all the bugs" Yeah fucking idiot, along with the taste and smell of your weed. Why even fucking grow if youre going to make it nasty as fuck! Its one thing to have a not awesome pheno or be a newb and mess up on nutes so it turns out so so. But for a guy who, according to him, has grown for over 5 years he knows NOTHING about growing/extracting.
So the only positive side to him using cooking oil is that ill be able to put it into gel caps without the potential effects of eating neem oil on my mind. FUCKING SCRUBS! i swear, i had my friend give him a good yell for wasting our time and money on some poop. We told him dont even talk to us unless you have a completely untouched run of plants/trim.
So just a little (long ass) story for you guys. If you ever come up with some similar shit you know the problem.
Sorry for the long post. But this story has to be told.
BEWARE OF THE SCRUB GROWER. The ones that thinks time=knowledge=wisdom. Ive been growin about 5 ish years and ive made some mistakes. But ive never felt like smoking ANYTHING that ive grown/extracted would possibly be bad for me. Because i dont spray my plants hardly ever. The occasional spray if i get clones from other gardens or if i let my clones root a few days longer than they should and develop a little pm. But i dont even spray in late veg. Mainly because i dont have problems with anything. No bugs, no mold, no bullshit.
End rant.
So i got some trim that looked amazing, for trim, over 350gs of it. Smelled not too bad, like trim that had been frozen for a month or so. And a good split with 2/3 goin to us and the grower only wantin 1/3 So i got to runnin it and it was all goin smooth. Use up almost a whole case after runnin 5 tubes at about 70-80gs per tube. So we have our hotplate set low as always with a pan as a buffer in between. It was a lot colder than usual outside, around 50 vs the usual 70-80, so when we came back after the last blast aand saw it was runny we just thought the combo of cold weather chilling the hot plate/buffer pan plus having blasted 350gs which even at like 5% is 17 ish grams. That much oil is usually pretty runny in the medium sized pyrex we have since its so thick. So we bring it inside for the scrape and heres where the bulllshit starts.
Grab a razor and first line, ZERO stickiness. The stuff flows like its not even touching the bottom of the pyrex. So right off the bat im 99% sure i know whats wrong. So we pour off whats left onto our PTFE sheet that we do the first purge on incase large amounts of excess hydrocarbons are left in it. The stuff flies out of the pyrex almost like its OILED........
At this point im now positive i know what it is. But we start the heat and let it sit at 100 degrees to see if maybe the large amount/outside cold temps kept some butane trapped in it. No real reaction to the heat couple bubbles but only for a few seconds. So we say fuck it and throw the lid on and pull a vac. Get about 28.5" and the stuff starts bubbling mad like its completely unpurged and filled with butane. We watch closely and over the next 30-45 minutes it doesnt stop.
By then i knew exactly what it was. Or i thought at least. NEEM OIL!!! This was my first guess because a lot of growers see "use up to 2 weeks before harvest" on the bottle and do just that. Even though a good grower knows if you have a bug/mold problem to take care of it in veg because it only gets worse in flower. Better hold back a crop a week or 2 rather than spend 8-10 weeks fighting bugs/mold. They also mistake that "2 weeks before harvest" because that is more for fruits and veggies, which have hard outter skins that you can rinse off before ingesting.
So i call my friend who knows him and im pissed! I now have about an OZ of nasty contaminated oil that i want to throw in the growers face. He gets ahold of the guy and its EVEN WORSE???? I didnt think it was possible. One one hand the result is slightly better but not much.
HE USED COOKING SPRAY!!!!!!! Like pam or canned olive oil........... I wanted to chop every one of this guys plants down for being such a fucking SCRUB at growing. His excuse was "it drowns out all the bugs" Yeah fucking idiot, along with the taste and smell of your weed. Why even fucking grow if youre going to make it nasty as fuck! Its one thing to have a not awesome pheno or be a newb and mess up on nutes so it turns out so so. But for a guy who, according to him, has grown for over 5 years he knows NOTHING about growing/extracting.
So the only positive side to him using cooking oil is that ill be able to put it into gel caps without the potential effects of eating neem oil on my mind. FUCKING SCRUBS! i swear, i had my friend give him a good yell for wasting our time and money on some poop. We told him dont even talk to us unless you have a completely untouched run of plants/trim.
So just a little (long ass) story for you guys. If you ever come up with some similar shit you know the problem.
Sorry for the long post. But this story has to be told.
BEWARE OF THE SCRUB GROWER. The ones that thinks time=knowledge=wisdom. Ive been growin about 5 ish years and ive made some mistakes. But ive never felt like smoking ANYTHING that ive grown/extracted would possibly be bad for me. Because i dont spray my plants hardly ever. The occasional spray if i get clones from other gardens or if i let my clones root a few days longer than they should and develop a little pm. But i dont even spray in late veg. Mainly because i dont have problems with anything. No bugs, no mold, no bullshit.
End rant.