Harvest a Pound Every Three Weeks!
- Thread starter StinkBud
- Start date
whysohigh
Well-Known Member
i have 3 in a 4x8x6.5
yummy77552
Member
Yes if you scale down to 6 or 8 hole posts, I have a 4x4 tent a two 8 hole would fit... But the whole Idea is to have a harvest every 3 weeks using 3 flowering systems, veg and clones... To do that 3 system setup in a 4x4 tent will need a one rail system x 3 with tubs right next to each other that will fit side by side like that. I know GH sells an 8gallon tub that would fit, its the lower controller for the water farm they sell. Since a single rail with 3 or 4 hole using a min one gallon for each plant, that should work out nicely... I hope Stink will post his Jr system or a mini system for us soon...
peace
oneeyejedi
Active Member
I also am courios about barneys
maddawg13
Active Member
Any advice would help . I put the seeds in a wet paper towel on the 4th and let them sit in there for 24 hours put them in rapid rooter after the 24 hr period on the 10th I put them into the cloner ,stinkbuds design of course . I started them out on clonex 150ml,calmag 5ml/g,gro pro 7.5ml/g,liquidkarma5ml/g. Being a noob I tried to get the ppm @ 700 like stinkbud said to but I have it @ around 830ppm , water temp @ 68 , ph is 5.9. Question being is the ppm to much do I need to drain and start over ? or do they look ok ? comments please ! Pics are not great but I am trying to figure this all out ! Oh yeah strains are Blueberry skunk (all popped ) , Train wreck ( out of five 2 popped ) Endless sky all 11 popped , blueskunk and trainwreck are feminized endless not ! Sorry for such a long quote .
Attachments
Maybetomorrow
Well-Known Member
Hey stink I noticed in one of you pictures that you were using round pipe. What size pipe is that and how are your sprayers attached? Trying to get this vertical stink inspired grow going and running the pipes all crazy is going to need a huge pump if I was able to run lines to the sprayers I could use a smaller pump any Ideas?
savinghiphop
Active Member
Jah bless to all the stinkbuddies!!
This is my 1st post and 1st grow, so bear with me..
I've been following stink's thread ever since I joined RIU, so first and foremost, thanks to all the long time subscribers and inquisitive minds of all kinds.
A pound a week is out of my league (for now). So may I introduce to you, my stinkbud jr mini-sog. 5 gal res, 6 hole 40" fencepost, 264ghp pumps.
The first unit is 41 days into flower. I have Super Lemon Haze and Trainwreck from GHS.
My 2nd unit, has Blue Cheese, Power Skunk, DP Blueberry and PPP. They are at 3 weeks and showing vigorous growth!!
I recently put clones of my SLH into the 3rd post 1 week early. The growth is remarkable with my scaled down version of Stink's method!
Out of all the SLH phenos I have seen online, I have yet to see one like this. It keeps shooting out pistils, and is incredibly dense!!
A friend of mine found 8 seeds in 2 pounds of sour diesel and blessed me with them. Guess who has 3 SD and a chocolope that just went into veg....ssshhh
Stank you to everyone! Peace
This is my 1st post and 1st grow, so bear with me..
I've been following stink's thread ever since I joined RIU, so first and foremost, thanks to all the long time subscribers and inquisitive minds of all kinds.
A pound a week is out of my league (for now). So may I introduce to you, my stinkbud jr mini-sog. 5 gal res, 6 hole 40" fencepost, 264ghp pumps.
The first unit is 41 days into flower. I have Super Lemon Haze and Trainwreck from GHS.
My 2nd unit, has Blue Cheese, Power Skunk, DP Blueberry and PPP. They are at 3 weeks and showing vigorous growth!!
I recently put clones of my SLH into the 3rd post 1 week early. The growth is remarkable with my scaled down version of Stink's method!
Out of all the SLH phenos I have seen online, I have yet to see one like this. It keeps shooting out pistils, and is incredibly dense!!
A friend of mine found 8 seeds in 2 pounds of sour diesel and blessed me with them. Guess who has 3 SD and a chocolope that just went into veg....ssshhh
Stank you to everyone! Peace
Is that stuff available at Lowes or Home Depot? I'd like to have a look at it.
nadbilson
Member
No, you may want to try a nursery or a hydroponics shop locally.
Clones don't need nutes. All they need is plain tap water and time.
maddawg13
Active Member
Thanks for the input , But these are from seed and I am using ro water , In this thread I dont remember what page , it was stated that if you use ro water you should add the calmag mag and grow pro and so on , That is the reason for the feeding !
alsoranmike
Well-Known Member
Lookin' good man!.... I've been looking into a scaled down version of this method since I really don't need a pound each month.Jah bless to all the stinkbuddies!!
This is my 1st post and 1st grow, so bear with me..
I've been following stink's thread ever since I joined RIU, so first and foremost, thanks to all the long time subscribers and inquisitive minds of all kinds.
A pound a week is out of my league (for now). So may I introduce to you, my stinkbud jr mini-sog. 5 gal res, 6 hole 40" fencepost, 264ghp pumps.
The first unit is 41 days into flower. I have Super Lemon Haze and Trainwreck from GHS.
My 2nd unit, has Blue Cheese, Power Skunk, DP Blueberry and PPP. They are at 3 weeks and showing vigorous growth!!
I recently put clones of my SLH into the 3rd post 1 week early. The growth is remarkable with my scaled down version of Stink's method!
Out of all the SLH phenos I have seen online, I have yet to see one like this. It keeps shooting out pistils, and is incredibly dense!!
A friend of mine found 8 seeds in 2 pounds of sour diesel and blessed me with them. Guess who has 3 SD and a chocolope that just went into veg....ssshhh
Stank you to everyone! Peace
Do you have a journal? I'd like to follow your grows as well as others like it, or even done on smaller scales if possible.
Not sure if hip hop deserves to be saved tho...
You're mixing up steps I think. If you use RO water, then you'll want to add cal mag for the veg and flower phases.
Since these are from seeds, you should already have a tap root, and possibly a couple more nubs and such going, which is all the cloner's designed to give ya. I'd suggest moving em to the veg phase, giving em the full nute treatment, and watching the fun
savinghiphop
Active Member
Thanks guys. So far I follow Stink's plans to a T, except no co2. Setup is a closet grow 21"x5.5'x8.5'. My nutes are 1/5 strength (180ml PBP grow/bloom, 60ml LK and 50ml+ sweet citrus for that extra tangy SLH!).My ppm has hit 2310, but I have 1 more res change before I flush. So I'll bring it down some before I flush. My 2nd res I'll play it safe around 1700. I'll take more pics when the lights come on...
alsoranmike, you know what they say "Hiphop ain't something you do. Hiphop is something you live". And it's a lot of worms where I'm from
old skool cool with new skool fuel... Like NYSD!! Spark one for your boy! Peace
alsoranmike, you know what they say "Hiphop ain't something you do. Hiphop is something you live". And it's a lot of worms where I'm from
old skool cool with new skool fuel... Like NYSD!! Spark one for your boy! Peace
maddawg13
Active Member
Just make sure you check your pH on your res and just follow the instructions on the bottle of clonex. You can also add Botanicare Liquid Karma a 5ml/gallon and Gro Pro at 7.5ml/gallon. If you are using RO water make sure you add some Cal-Mag+ at 5ml/gallon to the res. Not trying to start anything but like I said this is what I was working on !You're mixing up steps I think. If you use RO water, then you'll want to add cal mag for the veg and flower phases.
Since these are from seeds, you should already have a tap root, and possibly a couple more nubs and such going, which is all the cloner's designed to give ya. I'd suggest moving em to the veg phase, giving em the full nute treatment, and watching the fun
imburne
Well-Known Member
I posted my stinkbud veg setup on the fp of my site http://mmjspots.com kiss-ass
I also had a similar question to this.. I have a few clones and I just hacked up a few but I am almost positive I cut them too short.. I mean I only left like two credit cards width of a tip on the clones!! I will take a picture of it later.. I am using a mist maker in the cloner instead of the pump so I will let you guys know how that turns out as well. I ONLY used 10ML of the three veg formulas. That should keep it from clogging up the mister head.. It was about 300PPM and 6.1PH because I was sick of playing with it trying to get it to 5.8... Anyhow, updates soon.. I wish I had a camcorder..
I also had a similar question to this.. I have a few clones and I just hacked up a few but I am almost positive I cut them too short.. I mean I only left like two credit cards width of a tip on the clones!! I will take a picture of it later.. I am using a mist maker in the cloner instead of the pump so I will let you guys know how that turns out as well. I ONLY used 10ML of the three veg formulas. That should keep it from clogging up the mister head.. It was about 300PPM and 6.1PH because I was sick of playing with it trying to get it to 5.8... Anyhow, updates soon.. I wish I had a camcorder..
thinkhigh
Well-Known Member
Well I have finally turned the corner to better weed. I've been running a drip system for my veg. and Ebb/Flood system for my flowering. I've been preparing for this day. I just cut my clones today and put them in the Brand New Stinkbud Veg. unit. As the girls in the flowering room finish up (still have 5 weeks left) in the EBB/Flood unit, I will be building the Stinkbud NFT unit.
I will have about a week between the end of this grow and the start of the NFT unit. I needed the time down with the HPS light. I will be rearranging my whole setup. Moving both the veg. and flowering rooms and putting up new plastic walls to seperate them. I'm ready to see what this thing can do.
Here are some pics of the new veg. unit........
I will have about a week between the end of this grow and the start of the NFT unit. I needed the time down with the HPS light. I will be rearranging my whole setup. Moving both the veg. and flowering rooms and putting up new plastic walls to seperate them. I'm ready to see what this thing can do.
Here are some pics of the new veg. unit........