Hands Down Best Makeshift Smoking Method

Fortify

Member
If you are like me then you have had a time when you don't have any ways to toke, or you don't have enough bud for what you want to use. Both of those problems can be solved with this super easy toking tool that anybody can make in 2 mins and smokes real good.



Materials:​
1. Aluminum Foil
2. Pencil/Pen
3. One Piece Of Tape (Optional)

Instructions:​
1. Take pencil/pen and wrap 4-6 inches of aluminum foil around it, but not too tight.
2. Tape it the roll shut so it'll stay and take out pencil
3. Take pencil and insert in one side of the aluminum about 1-1.5 inches and bend it up (This will be the bowl)
4. There you go, put bud in bent up end and light it up and inhale thru the other end and enjoy.

Since this is using aluminum, before sombody mentions Alzheimer's, this is from the Alzheimer's Association's website today in the FAQ:

"During the 1960s and 1970s, aluminum emerged as a possible suspect in Alzheimer’s. This suspicion led to concern about exposure to aluminum through everyday sources such as pots and pans, beverage cans, antacids and antiperspirants. Since then, studies have failed to confirm any role for aluminum in causing Alzheimer’s. Experts today focus on other areas of research, and few believe that everyday sources of aluminum pose any threat."

Hope this helped somebody!
 

Diabolical666

Well-Known Member
Yea, we constructed these in highschool, most the time we used notebook paper...we could get a few hits before the paper burned up;)
WE should see who could make the best foil pipe!!!!
 

Hempicus

New Member
My friend had made a DYI bong before with a Coke bottle, a sharpie casing, and a wrench socket. He just pulled the ink out of the sharpie, and put the socket in the end (he had to find the right size socket). Then he had to cut the other end of the sharpie. Then he got a lighter melted the bottle and poked the sharpie through. I remember he used it for the longest time because he had to smoke on the down-low.
 

Fortify

Member
My friend had made a DYI bong before with a Coke bottle, a sharpie casing, and a wrench socket. He just pulled the ink out of the sharpie, and put the socket in the end (he had to find the right size socket). Then he had to cut the other end of the sharpie. Then he got a lighter melted the bottle and poked the sharpie through. I remember he used it for the longest time because he had to smoke on the down-low.
I need to try that that sounds really good
 
Top