Grow Room Build

my basic design for my setup is here: https://www.rollitup.org/grow-room-design-setup/308655-my-legal-grow-room-design.html

i painted the floor a few days ago and finally got around to start building the room today. didnt get much done, just hung up some thick plastic for a moisture barrier and got the deck all done...well i didnt get the plywood screwed down cuz i forgot to buy short screws, but other then that its done. i should have the walls up and ceiling done tomorrow. stay tuned for updates. anyway, enjoy.

Nice nug and grow room. It looks like you have a vicious guard on duty.

Nice looking room, it's huge. I wish I had the space. Anyways I will keep an eye on this.

sub'd. Looking forward to progress pics.

well all this rain we've been gettin here has given me a few days off of work, so i decided to work on the grow room. i got the ceiling up and all the wall studs in. im about to take a break and roll one up then im gona go cut some plywood for the walls and get them up...and im hoping to get started on the doors today too.

Yea just wandering what store sells that white plastic it looks like some quality stuff.

yankshow said:

Yea just wandering what store sells that white plastic it looks like some quality stuff.

Click to expand...

picked it up at my local hardware store. its 4 mil clear plastic...it was with all the painting shit. it is some nice heavy duty plastic.

ok got all the exterior walls up. next i gota get the one interior wall in then i need to build some door frames.

NIce progress Are you gonna just hang the lights from the roof??

Any ventilation built in??

Blaze12 said:

NIce progress Are you gonna just hang the lights from the roof??

Any ventilation built in??

Click to expand...

thanks.

i ran a 2x4 down the middle before i put the ceiling up so i would have something to hang the lights from. havent decided how im gona actually hang them though, proly just gona screw some eye hooks in there and use chain to hang them but i was also thinking about making a simple light rail so i can slide the lights left and right if i need to...

yeah gotta have ventilation. im gona get it all roughed in and then hook up the lights so i can see what the temps are gona be like...then im gona base how much ventilation i need from the temps.

i got a little more work done on it yesterday. got the door frames in and 2 of the doors are hung, just gota build one more door and get some plywood on em. also got the rest of my lights and my ro system.

got a little more done today. finished the one door, so now that room is done. got the other door frame hung so tomorrow i just gota cut some plywood to cover those 2 doors and then im done roughing it in
now im takin some flexeril and goin to bed

looking good, what are you doing for the walls. paint or mylar?

sixstring2112 said:

looking good, what are you doing for the walls. paint or mylar?

Click to expand...

thanks. im thinking a combination of both. i have some 52x84 mylar emergency blankets that i picked up for a buck a piece at the flea market a while back, my room is 75 inches tall so i figure ill hang up the mylar and paint the one foot strips at the top and bottom of the walls that arent covered by the mylar.

Looks nice, you are running three sections in there?

How big is each room?

How do you plan on using each room and what are your lighting plans per room?

Thanks!
Looks GOOD!

Also I do not think the mylar emergency blankets are going to reflect enough....
They also tear fairly easily.

Perhaps use them around the top of the walls to throw any light back that comes up and to
keep them out of the way from easily being knocked or torn.

Id look at flat outdoor paint for inside, reflects very well and is great for cleaning up easily between cycles.

looks good bro. does it have two or three rooms?

MiMedicalMJ said:

Looks nice, you are running three sections in there?

How big is each room?

How do you plan on using each room and what are your lighting plans per room?

Thanks!
Looks GOOD!

Also I do not think the mylar emergency blankets are going to reflect enough....
They also tear fairly easily.

Perhaps use them around the top of the walls to throw any light back that comes up and to
keep them out of the way from easily being knocked or torn.

Id look at flat outdoor paint for inside, reflects very well and is great for cleaning up easily between cycles.

Click to expand...

thanks. its two sections, the room on the left has two doors.
the room on the right is gona be my veg and clone room. its 38 inches deep, 46 inches wide and 75 inches tall. i have a 175w mh and an 85w 6500k cfl bulb that im gona use for my vegging and i have a 4 bulb 2 foot fluorescent light for my clones...not sure on the wattage for that one, a buddy of mine gave it to me. the room on the left is my flowering room. its 38 inches deep, 80 inches wide and 75 inches tall. im very limited on the amount of watts i can use til i upgrade the breaker panel in my house so i can only afford to use 600 watts in my flower room so i bought 4 150w hps for that, got em off ebay for so cheap...couldnt pass up the deal. since ill only be budding 6 plants at a time those will do just fine for now. ill be running homemade aero systems in all stages. i also have a 4x4x2 cabinet that im gona use as a mother room, i have 3 85w cfl's for that.

i have a light meter and a gallon of flat white paint so i planned on checking to see which is better. these mylar blankets look like they will do the trick though.

milpitan said:

looks good bro. does it have two or three rooms?

Click to expand...

thanks man. its just two rooms.

Any way to make thhe room on the left have double wide doors or a removeable section in the middle...... I will be doing that,,,, tired of chopping my girls in the grow room and hauling elsewhere.........

yeah i could do that very easily but i use a closet in my spare bedroom for drying.

it would be easy to add a removable wall in there. just rip some 2x4's in half so they are 2x2's and build a 2 rail track on the floor, ceiling and back wall and then you could just slide a sheet of plywood in the track and there ya go, you have a removable wall to split up the room into 2 sections.

very nice build man + rep! can't wait to see the finished product.