Grow Chamber's, HATCH Style

havefungodumb

Well-Known Member
hatch

have you seen this setup before?

you are good with making setups and obviously like doing it like every1 that does it? hehe


1/2 pvc some t's elbows u know , then mister setup 1/2 pvc to misters setup i seen has huge misters thats still a thinking process

all i got to even start to make a black bin like that is a 4width,8ftlong(i think) flood table i got 2 lol if i could cut it up i would?!! any ideas on how i could start building a setup like that first pic?
 

Attachments

HATCH

Well-Known Member
hatch

have you seen this setup before?

you are good with making setups and obviously like doing it like every1 that does it? hehe


1/2 pvc some t's elbows u know , then mister setup 1/2 pvc to misters setup i seen has huge misters thats still a thinking process

all i got to even start to make a black bin like that is a 4width,8ftlong(i think) flood table i got 2 lol if i could cut it up i would?!! any ideas on how i could start building a setup like that first pic?

OH Ya, I Have Seen Them, There Are Abunch Of Them At The Font Of This Thread.
& You Know I Have Some Idea's, Can You Post Some Pic.'s Of All The Stuff You Have To Work With, Space Size Ect.,,& Hell Ya I Will Come Up With Something For Ya!!!EH!!!
Check You Later`:`Hatch`:`
 

panhead

Well-Known Member
Havent checked in on ya in a while so i figured i'd stop by & see what your creating now.

As usual its lookin good.
 

HATCH

Well-Known Member
Havent checked in on ya in a while so i figured i'd stop by & see what your creating now.

As usual its lookin good.
Yes, It Has Been A Long Time!!!EH!!!,, Glad To ee You Come Through,, Alway's A Pleasure.
Last I Was In Your Thread, The Light Mover' Were A Great Add To Your Room's!!!,, Very Glad That Worked Good For Ya.,,I Alway's Try To Stay Current..

Cheers~`:`Hatch`:`:bigjoint::bigjoint:
 

havefungodumb

Well-Known Member
info i found:::::::I think i know they use 3 Antelco sprayers and the plumbing is simply PVC hooked up to a 250gph magnetic drive pump

(also sell bins for 150 i read on this site!,but are pricks when you call? lol)
Size:
24"wide x 46"Long x 12" or 24" High
Reservoir Capacity - 20 Gallons

pvc t's and elbows probly 1/2 pvc not sure.

well thats what i got, pretty damn good info if u wanna ask me :)

and videos on youtube!!!!!!!!!!!!!!!!!

pics are from video, i think id be happy just making 1 of the bins not 3 like his dvd he has.

anyways coo:)

later

HFGD~:hug:
 

Attachments

HATCH

Well-Known Member
info i found:::::::I think i know they use 3 Antelco sprayers and the plumbing is simply PVC hooked up to a 250gph magnetic drive pump

(also sell bins for 150 i read on this site!,but are pricks when you call? lol)
Size:
24"wide x 46"Long x 12" or 24" High
Reservoir Capacity - 20 Gallons

pvc t's and elbows probly 1/2 pvc not sure.

well thats what i got, pretty damn good info if u wanna ask me :)

and videos on youtube!!!!!!!!!!!!!!!!!

pics are from video, i think id be happy just making 1 of the bins not 3 like his dvd he has.

anyways coo:)

later

HFGD~:hug:
OK, Can You Give Me The Link To The Vid. On YouTube??

Those Look Like DWC (Deep Water Culture) System's??, Aero-System Will Have Two Separate Bin's, One For The Plant's & Root's, & Another For The Res. & Pump. We Need To Pen Point Which System You Are After.
 

panhead

Well-Known Member
Yes, It Has Been A Long Time!!!EH!!!,, Glad To ee You Come Through,, Alway's A Pleasure.
Last I Was In Your Thread, The Light Mover' Were A Great Add To Your Room's!!!,, Very Glad That Worked Good For Ya.,,I Alway's Try To Stay Current..

Cheers~`:`Hatch`:`:bigjoint::bigjoint:
Yup i remember,the light movers were one of the best investments ive made to date,i messed up my 1st grow with them,stretched the hell out of the plants,once i got past the learning curve with them they paid off pretty well,not so much in increased floor space but in overall yeild from better max penetration to all areas.

The next step for me is to get off my ass & get the flood & drain table up & running,i have so many other fish frying allready that its hard to find the time but i will get to it.

Im sure i'll be back here once i get that table up,it'll be like starting all over again & learning from scratch,well allmost :bigjoint:
 

HATCH

Well-Known Member
those are mister systems, aero is just roots in air?

they are misted with misters the roots.

ok brb
Yes, Aero-Is Just Root's In Air, Correct.

In That Video, When He Lift's Up That Mat To Show The Root's, Yes Thetre Are Mister's In There, But Do you See All That Water in The Bin???That Is DWC (Deep Water Culture).
Check This Out, This Is One Of My Aeroponic Pod's, As You Can See The Root's Get Misted & Then Drain To The Bottom Of The Pod, Where There Is A Drain That Goes To The Res. Below.




We Can Biuld Either One, Just Need To Know Which Your After.

P.S.That Was Just A Shot I Had. If You Want To See The Root's Of A Mature Plant?? I Can Take A New One.
 

VaporBros

Well-Known Member
HATCH, i sent you a PM but ya logged off right as i sent it. No worries. I had a few questions in there for ya.

After looking through the whole thread, how would you feel about assisting me in building a micro aeroponics system? It should fit in my closet thats 2ft wide and a little over a foot deep. This wont be for a few months (assembly that is) but i would love to pick up supplies when I can spare the cash (just finishing up building my indoor soil cab and starting to prep for the outdoor season)

I think this will be fun and a great learning experience. Keep in mind I only need it to hold 4-5 plants. Micro-Aero. Sounds like a blast!
 

HATCH

Well-Known Member
HATCH, i sent you a PM but ya logged off right as i sent it. No worries. I had a few questions in there for ya.

After looking through the whole thread, how would you feel about assisting me in building a micro aeroponics system? It should fit in my closet thats 2ft wide and a little over a foot deep. This wont be for a few months (assembly that is) but i would love to pick up supplies when I can spare the cash (just finishing up building my indoor soil cab and starting to prep for the outdoor season)

I think this will be fun and a great learning experience. Keep in mind I only need it to hold 4-5 plants. Micro-Aero. Sounds like a blast!
Hey What's Up!!,,Check Your PM., & See What Else You Need???
You Said Something About Bigger Pot's?? You Really Don't Need Bigger Pot's Then The 2", & I Have Learned You Don't Even Want Any Medium At All With Aeroponics, Just A Basket & Neoprene. I Used To Use The Rapid Starter Plug's, & I Have Lost alot Of Plant's To Root Rot, & It Was The Plug's That Were Holding To Much Water & Never Drying That Was The Cause, So I Started Just Cloning With The Basket & Neoprene, And The Root's Breath, & Dry Better Between Feeding's.
What Kind of Light Are You Thinking About??
 

VaporBros

Well-Known Member
I was thinking of using a 2' 4bulb high-output t5 fixture. I was thinking of doing 12/12 from seed using the bloom bulbs but im not even sure if you can start seeds in something like this? Are these made for clones or can you plant directly?

As I stated before this is just for fun and its gonna be in a small space so only 4 plants will probably be grown. And those would be lowryders most likely. In that case I would run 20/4. Height is obviously a concern for me too, and i figure if I use T5's I can save a lot of space and not have to worry about heat as much.

Is there a point in time where i can transfer the seedlings to soil if needed? I thought once the roots get about an inch its safe to transfer. I don't know much about these systems so im hear to learn and collaberate!
 

havefungodumb

Well-Known Member
ya the rez ?

but theres a mister system to?

thats pretty clever?

lol dwc with nutes , whats the difference with aero then?

thats confuses me :(
 
Top